X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Feasymega.inc;h=e7351c07d5aa045e2ec4c6ae3438b25d7322b1f8;hp=eebece924735d0c9681974851787aaf7990f9447;hb=HEAD;hpb=adfbccfeb551c9d0315116912e7255a173fc3103

diff --git a/doc/easymega.inc b/doc/easymega.inc
index eebece92..e7351c07 100644
--- a/doc/easymega.inc
+++ b/doc/easymega.inc
@@ -1,6 +1,7 @@
 == EasyMega
 
-	image::easymega-v1.0-top.jpg[width="4.5in"]
+	.EasyMega Board
+	image::easymega-v1.0-top.jpg[width=400]
 
 	EasyMega is a 1¼ inch by 2¼ inch circuit board. It was
 	designed to easily fit in a 38mm coupler. Like TeleMetrum,
@@ -13,6 +14,7 @@
 		EasyMega has two sets of nine screw terminals on the end of
 		the board opposite the telemetry antenna. They are as follows:
 
+		.EasyMega Screw Terminals
 		[options="header",grid="all",cols="2,3,10"]
 		|====
 		|Terminal #|Terminal Name|Description
@@ -34,24 +36,24 @@
 		|Main pyro channel connection to pyro circuit
 
 		|Top 5
-		|Main +
-		|Main pyro channel common connection to battery +
+		|Main +++
+		|Main pyro channel common connection to battery +++
 
 		|Top 6
 		|Apogee -
 		|Apogee pyro channel connection to pyro circuit
 
 		|Top 7
-		|Apogee +
-		|Apogee pyro channel common connection to battery +
+		|Apogee +++
+		|Apogee pyro channel common connection to battery +++
 
 		|Top 8
 		|D -
 		|D pyro channel connection to pyro circuit
 
 		|Top 9
-		|D +
-		|D pyro channel common connection to battery +
+		|D +++
+		|D pyro channel common connection to battery +++
 
 		|Bottom 1
 		|GND
@@ -70,24 +72,24 @@
 		|A pyro channel connection to pyro circuit
 
 		|Bottom 5
-		|A +
-		|A pyro channel common connection to battery +
+		|A +++
+		|A pyro channel common connection to battery +++
 
 		|Bottom 6
 		|B -
 		|B pyro channel connection to pyro circuit
 
 		|Bottom 7
-		|B +
-		|B pyro channel common connection to battery +
+		|B +++
+		|B pyro channel common connection to battery +++
 
 		|Bottom 8
 		|C -
 		|C pyro channel connection to pyro circuit
 
 		|Bottom 9
-		|C +
-		|C pyro channel common connection to battery +
+		|C +++
+		|C pyro channel common connection to battery +++
 		|====
 
 	=== Using a Separate Pyro Battery with EasyMega
@@ -95,9 +97,12 @@
 		EasyMega provides explicit support for an external pyro
 		battery. All that is required is to remove the jumper
 		between the lipo terminal (Bottom 3) and the pyro terminal
-		(Bottom 2). Then hook the negative pyro battery terminal to ground
-		(Bottom 1) and the positive pyro battery to the pyro battery
-		input (Bottom 2). You can then use the existing pyro screw
+		(Bottom 2). Then hook the negative pyro battery terminal to 
+		ground (Bottom 1) and the switched positive pyro battery to 
+		the pyro battery input (Bottom 2). Note that you must include
+		a switch between the pyro battery and the board for safety,
+		as the on-board power switch circuit only supports the primary
+		battery!  You can then use the existing pyro screw
 		terminals to hook up all of the pyro charges.
 
       	=== Using Only One Battery With EasyMega