X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=ee809f081f971d15bac1af75b77b046087f45979;hp=0af2a5e8bec8a7dad80fc005ea6c32a071473834;hb=8da565bbafa2925aa889cf9249497a709a814b7f;hpb=f743934ebd1a7c7c8b6db0223f0309e590aa15cd
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 0af2a5e8..ee809f08 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -1729,7 +1729,7 @@ NAR #88757, TRA #12200
Configure Altimeter
- Select this button and then select either a TeleMetrum or
+ Select this button and then select either an altimeter or
TeleDongle Device from the list provided. Selecting a TeleDongle
device will use the radio link to configure a remote altimeter.
@@ -1800,15 +1800,15 @@ NAR #88757, TRA #12200
Radio Frequency
- This configures which of the configured frequencies to use for both
+ This configures which of the frequencies to use for both
telemetry and packet command mode. Note that if you set this
- value via packet command mode, you will have to reconfigure
- the TeleDongle frequency before you will be able to use packet
- command mode again.
+ value via packet command mode, the TeleDongle frequency will
+ also be automatically reconfigured to match so that
+ communication will continue afterwards.
- Radio Calibration
+ RF Calibration
The radios in every Altus Metrum device are calibrated at the
factory to ensure that they transmit and receive on the
@@ -1819,6 +1819,25 @@ NAR #88757, TRA #12200
you must reprogram the unit completely.
+
+ Telemetry/RDF/APRS Enable
+
+ Enables the radio for transmission during flight. When
+ disabled, the radio will not transmit anything during flight
+ at all.
+
+
+
+ APRS Interval
+
+ How often to transmit GPS information via APRS. This option
+ is available on TeleMetrum v2 and TeleMega
+ boards. TeleMetrum v1 boards cannot transmit APRS
+ packets. Note that a single APRS packet takes nearly a full
+ second to transmit, so enabling this option will prevent
+ sending any other telemetry during that time.
+
+
Callsign
@@ -1896,6 +1915,23 @@ NAR #88757, TRA #12200
+
+ Configure Pyro Channels
+
+ This opens a separate window to configure the additional
+ pyro channels available on TeleMega. One column is presented
+ for each channel. Each row represents a single parameter, if
+ enabled the parameter must meet the specified test for the
+ pyro channel to be fired.
+
+
+
+
+
+
+
+
+