X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=ae10afe951956ca315c5783b006f9c8fc7a7c1d8;hp=30d98162a8254de181b115390e181c99c289903c;hb=7df221c42948cb42cf777b899263c8ec9067bd55;hpb=aa2edc97ac0c880e569baca453ff6302ad6da65f

diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 30d98162..ae10afe9 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -1316,6 +1316,18 @@ NAR #88757, TRA #12200
 	  terminals to hook up all of the pyro charges.
 	</para>
       </section>
+      <section>
+	<title>Using Only One Battery With TeleMega</title>
+	<para>
+	  Because TeleMega has built-in support for a separate pyro
+	  battery, if you want to fly with just one battery running
+	  both the computer and firing the charges, you need to
+	  connect the flight computer battery to the pyro
+	  circuit. TeleMega has two screw terminals for this—hook a
+	  wire from the Lipo terminal (Bottom 3) to the Pyro terminal
+	  (Bottom 2).
+	</para>
+      </section>
       <section>
 	<title>Using an Active Switch with TeleMega</title>
 	<para>
@@ -2932,9 +2944,10 @@ NAR #88757, TRA #12200
       <section>
 	<title>APRS Interval</title>
 	<para>
-	  How often to transmit GPS information via APRS. This option
-	  is available on TeleMetrum v2 and TeleMega
-	  boards. TeleMetrum v1 boards cannot transmit APRS
+	  How often to transmit GPS information via APRS (in
+	  seconds). When set to zero, APRS transmission is
+	  disabled. This option is available on TeleMetrum v2 and
+	  TeleMega boards. TeleMetrum v1 boards cannot transmit APRS
 	  packets. Note that a single APRS packet takes nearly a full
 	  second to transmit, so enabling this option will prevent
 	  sending any other telemetry during that time.