X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Faltusmetrum.xsl;h=87220baa50cb1b9a92e91d293e74492f2011ac33;hp=606c8b9945cb8985d9f4d69020b4ef6c58bb6f68;hb=2441090f26c3df66a6ce48d64e64384ce9e5ef82;hpb=1c344b760776cd5d8c0297d8db9bf02687381b4e diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index 606c8b99..87220baa 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -22,7 +22,7 @@ Towns - 2011 + 2012 Bdale Garbee and Keith Packard @@ -35,6 +35,14 @@ + + 1.1 + 13 September 2012 + + Updated for software version 1.1. Version 1.1 has new + features but is otherwise compatible with version 1.0. + + 1.0 24 August 2011 @@ -258,7 +266,8 @@ NAR #88757, TRA #12200 A typical TeleMetrum or TeleMini installation involves attaching only a suitable Lithium Polymer battery, a single pole switch for power on/off, and two pairs of wires connecting e-matches for the - apogee and main ejection charges. + apogee and main ejection charges. All Altus Metrum products are + designed for use with single-cell batteries with 3.7 volts nominal. By default, we use the unregulated output of the Li-Po battery directly @@ -586,7 +595,7 @@ NAR #88757, TRA #12200
Maximum Flight Log - TeleMetrum version 1.1 has 2MB of on-board flash storage, + TeleMetrum version 1.1 and 1.2 have 2MB of on-board flash storage, enough to hold over 40 minutes of data at full data rate (100 samples/second). TeleMetrum 1.0 has 1MB of on-board storage. As data are stored at a reduced rate during descent @@ -602,7 +611,7 @@ NAR #88757, TRA #12200 All of the configuration data is also stored in the flash - memory, which consumes 64kB on TeleMetrum v1.1 and 256B on + memory, which consumes 64kB on TeleMetrum v1.1/v1.2 and 256B on TeleMetrum v1.0. This configuration space is not available for storing flight log data. @@ -619,7 +628,7 @@ NAR #88757, TRA #12200 The default size, 192kB, allows for 10 flights of storage on - TeleMetrum v1.1 and 5 flights on TeleMetrum v1.0. This + TeleMetrum v1.1/v1.2 and 5 flights on TeleMetrum v1.0. This ensures that you won't need to erase the memory before flying each time while still allowing more than sufficient storage for each flight. @@ -1290,6 +1299,16 @@ NAR #88757, TRA #12200 your local radio regulations.
+
+ Imperial Units + + This switches between metric units (meters) and imperial + units (feet and miles). This affects the display of values + use during flight monitoring, data graphing and all of the + voice announcements. It does not change the units used when + exporting to CSV files, those are always produced in metric units. + +
Font Size @@ -1319,6 +1338,73 @@ NAR #88757, TRA #12200
+
+ Configure Groundstation + + Select this button and then select a TeleDongle Device from the list provided. + + + The first few lines of the dialog provide information about the + connected device, including the product name, + software version and hardware serial number. Below that are the + individual configuration entries. + + + Note that the TeleDongle itself doesn't save any configuration + data, the settings here are recorded on the local machine in + the Java preferences database. Moving the TeleDongle to + another machine, or using a different user account on the same + machine will cause settings made here to have no effect. + + + At the bottom of the dialog, there are three buttons: + + + + + Save. This writes any changes to the + local Java preferences file. If you don't + press this button, any changes you make will be lost. + + + + + Reset. This resets the dialog to the most recently saved values, + erasing any changes you have made. + + + + + Close. This closes the dialog. Any unsaved changes will be + lost. + + + + + The rest of the dialog contains the parameters to be configured. + +
+ Frequency + + This configures the frequency to use for both telemetry and + packet command mode. Set this before starting any operation + involving packet command mode so that it will use the right + frequency. Telemetry monitoring mode also provides a menu to + change the frequency, and that menu also sets the same Java + preference value used here. + +
+
+ Radio Calibration + + The radios in every Altus Metrum device are calibrated at the + factory to ensure that they transmit and receive on the + specified frequency. To change a TeleDongle's calibration, + you must reprogram the unit completely, so this entry simply + shows the current value and doesn't allow any changes. + +
+
Flash Image @@ -1447,8 +1533,9 @@ NAR #88757, TRA #12200 In the rocket itself, you just need a TeleMetrum or TeleMini board and - a Li-Po rechargeable battery. An 860mAh battery weighs less than a 9V - alkaline battery, and will run a TeleMetrum for hours. + a single-cell, 3.7 volt nominal Li-Po rechargeable battery. An + 850mAh battery weighs less than a 9V alkaline battery, and will + run a TeleMetrum for hours. A 110mAh battery weighs less than a triple A battery and will run a TeleMetrum for a few hours, or a TeleMini for much (much) longer. @@ -1842,7 +1929,7 @@ NAR #88757, TRA #12200 Select the image you want put on the TeleMetrum, which should have a - name in the form telemetrum-v1.1-1.0.0.ihx. It should be visible + name in the form telemetrum-v1.2-1.0.0.ihx. It should be visible in the default directory, if not you may have to poke around your system to find it. @@ -2480,6 +2567,7 @@ NAR #88757, TRA #12200 Release Notes +