X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=ao-bringup%2Fturnon_telebt_v1;fp=ao-bringup%2Fturnon_telebt_v1;h=f4100ae2f928f3546cb5b2f5419c534e91942784;hp=0000000000000000000000000000000000000000;hb=9e40f97b013256650364a2a7be96d7d2216ed778;hpb=773b23c48f67564eec83fc3ee085862c547ad160 diff --git a/ao-bringup/turnon_telebt_v1 b/ao-bringup/turnon_telebt_v1 new file mode 100755 index 00000000..f4100ae2 --- /dev/null +++ b/ao-bringup/turnon_telebt_v1 @@ -0,0 +1,62 @@ +#!/bin/sh + +if [ -x ../ao-tools/ao-load/ao-load ]; then + AOLOAD=../ao-tools/ao-load/ao-load +elif [ -x /usr/bin/ao-load ]; then + AOLOAD=/usr/bin/ao-load +else + echo "Can't find ao-load! Aborting." + exit 1 +fi + +if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then + RAWLOAD=../ao-tools/ao-rawload/ao-rawload +elif [ -x /usr/bin/ao-rawload ]; then + RAWLOAD=/usr/bin/ao-rawload +else + echo "Can't find ao-rawload! Aborting." + exit 1 +fi + +echo "TeleBT v1.1 Turn-On and Calibration Program" +echo "Copyright 2013 by Bdale Garbee. Released under GPL v2" +echo +echo "Expectations:" +echo "\tTeleBT v1.1 powered from USB" +echo "\t\twith TeleDonlge (on /dev/ttyACM0) cabled to debug header" +echo "\t\twith coax from SMA to frequency counter" +echo +echo -n "TeleBT serial number: " +read SERIAL + +echo $RAWLOAD + +case $USER in + bdale) + DONGLE=100 + ;; + keithp) + DONGLE=186 + ;; + *) + echo "Unknow user" + exit 1 + ;; +esac + +$RAWLOAD -D $DONGLE -r ao_led_blink.ihx +echo "LEDs should be blinking" +sleep 5 + +$RAWLOAD -D $DONGLE -r ao_radio_xmit.ihx +echo -n "Generating RF carrier. Please enter measured frequency: " +read FREQ + +CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"` + +echo "Programming flash with cal value " $CAL_VALUE +$AOLOAD -D $DONGLE --cal $CAL_VALUE ~/altusmetrumllc/Binaries/telebt-v1.0*.ihx $SERIAL + +echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE +echo $SERIAL","$CAL_VALUE >> cal_values +echo "Unplug debug cable, power cycle, cu to the board, confirm freq and record power"