production TeleGPS v2.0 use a 16Mhz crystal for the SOC

[fw/altos] / src / telegps-v2.0 / ao_pins.h

diff --git a/src/telegps-v2.0/ao_pins.h b/src/telegps-v2.0/ao_pins.h
index 74f4ff27d6ea46f8823e8a997a2df898847b8be2..49f51a9c30c570d0fb194ecb72bc121e5671f495 100644 (file)
--- a/src/telegps-v2.0/ao_pins.h
+++ b/src/telegps-v2.0/ao_pins.h
@@ -33,11 +33,11 @@
 #define IS_FLASH_LOADER                0
 #define HAS_BEEP              0
 
-#define AO_HSE                  32000000
+#define AO_HSE                  16000000
 #define AO_RCC_CFGR_PLLMUL      STM_RCC_CFGR_PLLMUL_3
-#define AO_RCC_CFGR2_PLLDIV    STM_RCC_CFGR2_PREDIV_2
+#define AO_RCC_CFGR2_PLLDIV    STM_RCC_CFGR2_PREDIV_1
 #define AO_PLLMUL               3
-#define AO_PLLDIV               2
+#define AO_PLLDIV               1
 
 /* HCLK = 48MHz */
 #define AO_AHB_PRESCALER        1
@@ -103,13 +103,15 @@ struct ao_adc {
 #define AO_M25_SPI_BUS          AO_SPI_1_PA5_PA6_PA7
 
 /* Serial */
-#define HAS_SERIAL_1           1
+#define HAS_SERIAL_1           0
 #define SERIAL_1_PB6_PB7       1
 #define USE_SERIAL_1_STDIN     0
 
-#define HAS_SERIAL_2           1
+#define HAS_SERIAL_2           1
 #define SERIAL_2_PA2_PA3       1
 #define USE_SERIAL_2_STDIN     0
+#define USE_SERIAL_2_FLOW       0
+#define USE_SERIAL_2_SW_FLOW    0
 
 #define ao_gps_getchar         ao_serial2_getchar
 #define ao_gps_putchar         ao_serial2_putchar
@@ -149,22 +151,17 @@ struct ao_adc {
 
 #define AO_FEC_DEBUG            0
 #define AO_CC1200_SPI_CS_PORT   (&stm_gpioa)
-#define AO_CC1200_SPI_CS_PIN    5
+#define AO_CC1200_SPI_CS_PIN    1
 #define AO_CC1200_SPI_BUS       AO_SPI_1_PA5_PA6_PA7
 #define AO_CC1200_SPI           stm_spi1
 #define AO_CC1200_SPI_SPEED     AO_SPI_SPEED_6MHz
 
 #define AO_CC1200_INT_PORT              (&stm_gpioa)
 #define AO_CC1200_INT_PIN               4
-#define AO_CC1200_MCU_WAKEUP_PORT       (&stm_gpioa)
-#define AO_CC1200_MCU_WAKEUP_PIN        (0)
 
 #define AO_CC1200_INT_GPIO      2
 #define AO_CC1200_INT_GPIO_IOCFG        CC1200_IOCFG2
 
-#define AO_CC1200_MARC_GPIO     3
-#define AO_CC1200_MARC_GPIO_IOCFG       CC1200_IOCFG3
-
 #define HAS_BOOT_RADIO          0
 
 #endif /* _AO_PINS_H_ */