altos: Rename teledongle-v1.9 as teledongle-v3.0

[fw/altos] / src / teledongle-v1.9 / ao_pins.h

diff --git a/src/teledongle-v1.9/ao_pins.h b/src/teledongle-v1.9/ao_pins.h
deleted file mode 100644 (file)
index f8889c4..0000000
--- a/src/teledongle-v1.9/ao_pins.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright © 2012 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-/* Using TeleMetrum v1.9 board */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-#define AO_STACK_SIZE  324
-
-#define HAS_TASK_QUEUE         1
-
-#define IS_FLASH_LOADER        0
-
-/* Crystal on the board */
-#define AO_LPC_CLKIN   12000000
-
-/* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
-#define AO_LPC_CLKOUT  48000000
-
-/* System clock frequency */
-#define AO_LPC_SYSCLK  24000000
-
-#define HAS_EEPROM             0
-#define USE_INTERNAL_FLASH     0
-#define USE_STORAGE_CONFIG     0
-#define USE_EEPROM_CONFIG      0
-
-#define HAS_USB                        1
-#define HAS_USB_CONNECT                0
-#define HAS_USB_VBUS           0
-#define HAS_USB_PULLUP         1
-#define AO_USB_PULLUP_PORT     0
-#define AO_USB_PULLUP_PIN      20
-
-#define HAS_BEEP               0
-#define HAS_RADIO              1
-#define HAS_TELEMETRY          0
-#define HAS_RSSI               0
-
-#define HAS_SPI_0              1
-#define SPI_SCK0_P0_6          1
-
-#define PACKET_HAS_SLAVE       0
-#define PACKET_HAS_MASTER      1
-
-#define LOW_LEVEL_DEBUG                0
-
-#define LED_PORT               0
-#define LED_PIN_RED            14
-#define LED_PIN_GREEN          7
-#define AO_LED_RED             (1 << LED_PIN_RED)
-#define AO_LED_GREEN           (1 << LED_PIN_GREEN)
-
-#define LEDS_AVAILABLE         (AO_LED_RED | AO_LED_GREEN)
-
-#define HAS_GPS                        0
-#define HAS_FLIGHT             0
-#define HAS_ADC                        0
-#define HAS_LOG                        0
-
-/*
- * Telemetry monitoring
- */
-#define HAS_MONITOR            1
-#define LEGACY_MONITOR         0
-#define HAS_MONITOR_PUT                1
-#define AO_MONITOR_LED         AO_LED_GREEN
-#define AO_MONITOR_BAD         AO_LED_RED
-
-/*
- * Radio (cc1200)
- */
-
-/* gets pretty close to 434.550 */
-
-#define AO_RADIO_CAL_DEFAULT   5695733
-
-#define AO_FEC_DEBUG           0
-#define AO_CC1200_SPI_CS_PORT  0
-#define AO_CC1200_SPI_CS_PIN   3
-#define AO_CC1200_SPI_BUS      0
-#define AO_CC1200_SPI          0
-
-#define AO_CC1200_INT_PORT     0
-#define AO_CC1200_INT_PIN      2
-
-#define AO_CC1200_INT_GPIO     2
-#define AO_CC1200_INT_GPIO_IOCFG       CC1200_IOCFG2
-
-/*
- * Profiling Viterbi decoding
- */
-
-#ifndef AO_PROFILE
-#define AO_PROFILE             0
-#endif
-
-#endif /* _AO_PINS_H_ */