*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
#define USB_DEBUG_DATA 0
#define USB_ECHO 0
+#ifndef USE_USB_STDIO
+#define USE_USB_STDIO 1
+#endif
+
+#if USE_USB_STDIO
+#define AO_USB_OUT_SLEEP_ADDR (&ao_stdin_ready)
+#else
+#define AO_USB_OUT_SLEEP_ADDR (&ao_usb_out_avail)
+#endif
+
#if USB_DEBUG
#define debug(format, args...) printf(format, ## args);
#else
#define debug_data(format, args...)
#endif
-struct ao_task ao_usb_task;
-
struct ao_usb_setup {
uint8_t dir_type_recip;
uint8_t request;
* but not pulled to the shadow buffer.
*/
static uint8_t ao_usb_out_avail;
-static uint8_t ao_usb_running;
+uint8_t ao_usb_running;
static uint8_t ao_usb_configuration;
-static uint8_t ueienx_0;
#define AO_USB_EP0_GOT_RESET 1
#define AO_USB_EP0_GOT_SETUP 2
(1 << STM_USB_EPR_EP_KIND) | \
(STM_USB_EPR_EA_MASK << STM_USB_EPR_EA))
+#define TX_DBG 0
+#define RX_DBG 0
+
+#if TX_DBG
+#define _tx_dbg0(msg) _dbg(__LINE__,msg,0)
+#define _tx_dbg1(msg,value) _dbg(__LINE__,msg,value)
+#else
+#define _tx_dbg0(msg)
+#define _tx_dbg1(msg,value)
+#endif
+
+#if RX_DBG
+#define _rx_dbg0(msg) _dbg(__LINE__,msg,0)
+#define _rx_dbg1(msg,value) _dbg(__LINE__,msg,value)
+#else
+#define _rx_dbg0(msg)
+#define _rx_dbg1(msg,value)
+#endif
+
+#if TX_DBG || RX_DBG
+static void _dbg(int line, char *msg, uint32_t value);
+#endif
+
/*
* Set the state of the specified endpoint register to a new
* value. This is tricky because the bits toggle where the new
{
uint32_t epr_write, epr_old;
+ _tx_dbg1("set_stat_tx top", stat_tx);
epr_old = epr_write = stm_usb.epr[ep];
epr_write &= STM_USB_EPR_PRESERVE_MASK;
epr_write |= STM_USB_EPR_INVARIANT;
STM_USB_EPR_STAT_TX_MASK << STM_USB_EPR_STAT_TX,
stat_tx << STM_USB_EPR_STAT_TX);
stm_usb.epr[ep] = epr_write;
+ _tx_dbg1("set_stat_tx bottom", epr_write);
}
static void
ao_usb_set_stat_tx(int ep, uint32_t stat_tx)
{
- cli();
+ ao_arch_block_interrupts();
_ao_usb_set_stat_tx(ep, stat_tx);
- sei();
+ ao_arch_release_interrupts();
}
static void
-ao_usb_set_stat_rx(int ep, uint32_t stat_rx) {
+_ao_usb_set_stat_rx(int ep, uint32_t stat_rx) {
uint32_t epr_write, epr_old;
- cli();
epr_write = epr_old = stm_usb.epr[ep];
epr_write &= STM_USB_EPR_PRESERVE_MASK;
epr_write |= STM_USB_EPR_INVARIANT;
STM_USB_EPR_STAT_RX_MASK << STM_USB_EPR_STAT_RX,
stat_rx << STM_USB_EPR_STAT_RX);
stm_usb.epr[ep] = epr_write;
- sei();
+}
+
+static void
+ao_usb_set_stat_rx(int ep, uint32_t stat_rx) {
+ ao_arch_block_interrupts();
+ _ao_usb_set_stat_rx(ep, stat_rx);
+ ao_arch_release_interrupts();
}
/*
ao_usb_init_ep(uint8_t ep, uint32_t addr, uint32_t type, uint32_t stat_rx, uint32_t stat_tx)
{
uint32_t epr;
- cli();
+ ao_arch_block_interrupts();
epr = stm_usb.epr[ep];
epr = ((0 << STM_USB_EPR_CTR_RX) |
(epr & (1 << STM_USB_EPR_DTOG_RX)) |
(stat_tx << STM_USB_EPR_STAT_TX)) |
(addr << STM_USB_EPR_EA));
stm_usb.epr[ep] = epr;
- sei();
+ ao_arch_release_interrupts();
debug ("writing epr[%d] 0x%08x wrote 0x%08x\n",
ep, epr, stm_usb.epr[ep]);
}
static void
ao_usb_set_ep0(void)
{
- uint32_t epr;
int e;
ao_usb_sram_addr = 0;
}
ao_usb_set_address(0);
+
+ ao_usb_running = 0;
+
+ /* Reset our internal state
+ */
+
+ ao_usb_ep0_state = AO_USB_EP0_IDLE;
+
+ ao_usb_ep0_in_data = NULL;
+ ao_usb_ep0_in_len = 0;
+
+ ao_usb_ep0_out_data = 0;
+ ao_usb_ep0_out_len = 0;
}
static void
ao_usb_set_configuration(void)
{
- uint32_t epr;
-
debug ("ao_usb_set_configuration\n");
/* Set up the INT end point */
STM_USB_EPR_EP_TYPE_INTERRUPT,
STM_USB_EPR_STAT_RX_DISABLED,
STM_USB_EPR_STAT_TX_NAK);
-
+
/* Set up the OUT end point */
ao_usb_bdt[AO_USB_OUT_EPR].single.addr_rx = ao_usb_sram_addr;
ao_usb_bdt[AO_USB_OUT_EPR].single.count_rx = ((1 << STM_USB_BDT_COUNT_RX_BL_SIZE) |
STM_USB_EPR_EP_TYPE_BULK,
STM_USB_EPR_STAT_RX_VALID,
STM_USB_EPR_STAT_TX_DISABLED);
-
+
/* Set up the IN end point */
ao_usb_bdt[AO_USB_IN_EPR].single.addr_tx = ao_usb_sram_addr;
ao_usb_bdt[AO_USB_IN_EPR].single.count_tx = 0;
STM_USB_EPR_STAT_RX_DISABLED,
STM_USB_EPR_STAT_TX_NAK);
+ ao_usb_in_flushed = 0;
+ ao_usb_in_pending = 0;
+ ao_wakeup(&ao_usb_in_pending);
+
+ ao_usb_out_avail = 0;
+ ao_usb_configuration = 0;
+
ao_usb_running = 1;
+ ao_wakeup(&ao_usb_running);
}
static uint16_t control_count;
static uint16_t out_count;
static uint16_t reset_count;
-void
-stm_usb_lp_isr(void)
-{
- uint32_t istr = stm_usb.istr;
-
- if (istr & (1 << STM_USB_ISTR_CTR)) {
- uint8_t ep = istr & STM_USB_ISTR_EP_ID_MASK;
- uint32_t epr, epr_write;
-
- /* Preserve the SW write bits, don't mess with most HW writable bits,
- * clear the CTR_RX and CTR_TX bits
- */
- epr = stm_usb.epr[ep];
- epr_write = epr;
- epr_write &= STM_USB_EPR_PRESERVE_MASK;
- epr_write |= STM_USB_EPR_INVARIANT;
- epr_write &= ~(1 << STM_USB_EPR_CTR_RX);
- epr_write &= ~(1 << STM_USB_EPR_CTR_TX);
- stm_usb.epr[ep] = epr_write;
-
- switch (ep) {
- case 0:
- ++control_count;
- if (ao_usb_epr_ctr_rx(epr)) {
- if (ao_usb_epr_setup(epr))
- ao_usb_ep0_receive |= AO_USB_EP0_GOT_SETUP;
- else
- ao_usb_ep0_receive |= AO_USB_EP0_GOT_RX_DATA;
- }
- if (ao_usb_epr_ctr_tx(epr))
- ao_usb_ep0_receive |= AO_USB_EP0_GOT_TX_ACK;
- ao_wakeup(&ao_usb_ep0_receive);
- break;
- case AO_USB_OUT_EPR:
- ++out_count;
- if (ao_usb_epr_ctr_rx(epr)) {
- ao_usb_out_avail = 1;
- ao_wakeup(&ao_stdin_ready);
- }
- break;
- case AO_USB_IN_EPR:
- ++in_count;
- if (ao_usb_epr_ctr_tx(epr)) {
- ao_usb_in_pending = 0;
- ao_wakeup(&ao_usb_in_pending);
- }
- break;
- case AO_USB_INT_EPR:
- ++int_count;
- if (ao_usb_epr_ctr_tx(epr))
- _ao_usb_set_stat_tx(AO_USB_INT_EPR, STM_USB_EPR_STAT_TX_NAK);
- break;
- }
- return;
- }
-
- if (istr & (1 << STM_USB_ISTR_RESET)) {
- ++reset_count;
- stm_usb.istr &= ~(1 << STM_USB_ISTR_RESET);
- ao_usb_ep0_receive |= AO_USB_EP0_GOT_RESET;
- ao_wakeup(&ao_usb_ep0_receive);
- }
-}
-
-void
-stm_usb_fs_wkup(void)
-{
- /* USB wakeup, just clear the bit for now */
- stm_usb.istr &= ~(1 << STM_USB_ISTR_WKUP);
-}
-
/* The USB memory holds 16 bit values on 32 bit boundaries
* and must be accessed only in 32 bit units. Sigh.
*/
}
static void
-ao_usb_ep0_in_start(uint8_t max)
+ao_usb_ep0_in_start(uint16_t max)
{
/* Don't send more than asked for */
if (ao_usb_ep0_in_len > max)
/* Walk through the list of descriptors and find a match
*/
static void
-ao_usb_get_descriptor(uint16_t value)
+ao_usb_get_descriptor(uint16_t value, uint16_t length)
{
const uint8_t *descriptor;
uint8_t type = value >> 8;
len = descriptor[2];
else
len = descriptor[0];
+ if (len > length)
+ len = length;
ao_usb_ep0_in_set(descriptor, len);
break;
}
break;
case AO_USB_REQ_GET_DESCRIPTOR:
debug ("get descriptor %d\n", ao_usb_setup.value);
- ao_usb_get_descriptor(ao_usb_setup.value);
+ ao_usb_get_descriptor(ao_usb_setup.value, ao_usb_setup.length);
break;
case AO_USB_REQ_GET_CONFIGURATION:
debug ("get configuration %d\n", ao_usb_configuration);
ao_usb_ep0_in_start(ao_usb_setup.length);
}
-/* End point 0 receives all of the control messages. */
static void
-ao_usb_ep0(void)
+ao_usb_ep0_handle(uint8_t receive)
{
- uint8_t intx, udint;
-
- debug ("usb task started\n");
- ao_usb_ep0_state = AO_USB_EP0_IDLE;
- for (;;) {
- uint8_t receive;
- ao_arch_critical(
- while (!(receive = ao_usb_ep0_receive))
- ao_sleep(&ao_usb_ep0_receive);
- ao_usb_ep0_receive = 0;
- );
-
- if (receive & AO_USB_EP0_GOT_RESET) {
- debug ("\treset\n");
- ao_usb_set_ep0();
- continue;
- }
- if (receive & AO_USB_EP0_GOT_SETUP) {
- debug ("\tsetup\n");
- ao_usb_ep0_setup();
- }
- if (receive & AO_USB_EP0_GOT_RX_DATA) {
- debug ("\tgot rx data\n");
- if (ao_usb_ep0_state == AO_USB_EP0_DATA_OUT) {
- ao_usb_ep0_fill();
- if (ao_usb_ep0_out_len == 0) {
- ao_usb_ep0_state = AO_USB_EP0_DATA_IN;
- ao_usb_ep0_in_start(0);
- }
+ ao_usb_ep0_receive = 0;
+ if (receive & AO_USB_EP0_GOT_RESET) {
+ debug ("\treset\n");
+ ao_usb_set_ep0();
+ return;
+ }
+ if (receive & AO_USB_EP0_GOT_SETUP) {
+ debug ("\tsetup\n");
+ ao_usb_ep0_setup();
+ }
+ if (receive & AO_USB_EP0_GOT_RX_DATA) {
+ debug ("\tgot rx data\n");
+ if (ao_usb_ep0_state == AO_USB_EP0_DATA_OUT) {
+ ao_usb_ep0_fill();
+ if (ao_usb_ep0_out_len == 0) {
+ ao_usb_ep0_state = AO_USB_EP0_DATA_IN;
+ ao_usb_ep0_in_start(0);
}
}
- if (receive & AO_USB_EP0_GOT_TX_ACK) {
- debug ("\tgot tx ack\n");
-
- /* Wait until the IN packet is received from addr 0
- * before assigning our local address
- */
- if (ao_usb_address_pending)
- ao_usb_set_address(ao_usb_address);
- if (ao_usb_ep0_state == AO_USB_EP0_DATA_IN)
- ao_usb_ep0_flush();
+ }
+ if (receive & AO_USB_EP0_GOT_TX_ACK) {
+ debug ("\tgot tx ack\n");
+
+#if HAS_FLIGHT && AO_USB_FORCE_IDLE
+ ao_flight_force_idle = 1;
+#endif
+ /* Wait until the IN packet is received from addr 0
+ * before assigning our local address
+ */
+ if (ao_usb_address_pending)
+ ao_usb_set_address(ao_usb_address);
+ if (ao_usb_ep0_state == AO_USB_EP0_DATA_IN)
+ ao_usb_ep0_flush();
+ }
+}
+
+void
+stm_usb_lp_isr(void)
+{
+ uint32_t istr = stm_usb.istr;
+
+ if (istr & (1 << STM_USB_ISTR_CTR)) {
+ uint8_t ep = istr & STM_USB_ISTR_EP_ID_MASK;
+ uint32_t epr, epr_write;
+
+ /* Preserve the SW write bits, don't mess with most HW writable bits,
+ * clear the CTR_RX and CTR_TX bits
+ */
+ epr = stm_usb.epr[ep];
+ epr_write = epr;
+ epr_write &= STM_USB_EPR_PRESERVE_MASK;
+ epr_write |= STM_USB_EPR_INVARIANT;
+ epr_write &= ~(1 << STM_USB_EPR_CTR_RX);
+ epr_write &= ~(1 << STM_USB_EPR_CTR_TX);
+ stm_usb.epr[ep] = epr_write;
+
+ switch (ep) {
+ case 0:
+ ++control_count;
+ if (ao_usb_epr_ctr_rx(epr)) {
+ if (ao_usb_epr_setup(epr))
+ ao_usb_ep0_receive |= AO_USB_EP0_GOT_SETUP;
+ else
+ ao_usb_ep0_receive |= AO_USB_EP0_GOT_RX_DATA;
+ }
+ if (ao_usb_epr_ctr_tx(epr))
+ ao_usb_ep0_receive |= AO_USB_EP0_GOT_TX_ACK;
+ ao_usb_ep0_handle(ao_usb_ep0_receive);
+ break;
+ case AO_USB_OUT_EPR:
+ ++out_count;
+ if (ao_usb_epr_ctr_rx(epr)) {
+ _rx_dbg1("RX ISR", epr);
+ ao_usb_out_avail = 1;
+ _rx_dbg0("out avail set");
+ ao_wakeup(AO_USB_OUT_SLEEP_ADDR);
+ _rx_dbg0("stdin awoken");
+ }
+ break;
+ case AO_USB_IN_EPR:
+ ++in_count;
+ _tx_dbg1("TX ISR", epr);
+ if (ao_usb_epr_ctr_tx(epr)) {
+ ao_usb_in_pending = 0;
+ ao_wakeup(&ao_usb_in_pending);
+ }
+ break;
+ case AO_USB_INT_EPR:
+ ++int_count;
+ if (ao_usb_epr_ctr_tx(epr))
+ _ao_usb_set_stat_tx(AO_USB_INT_EPR, STM_USB_EPR_STAT_TX_NAK);
+ break;
}
+ return;
+ }
+
+ if (istr & (1 << STM_USB_ISTR_RESET)) {
+ ++reset_count;
+ stm_usb.istr &= ~(1 << STM_USB_ISTR_RESET);
+ ao_usb_ep0_receive |= AO_USB_EP0_GOT_RESET;
+ ao_usb_ep0_handle(ao_usb_ep0_receive);
}
}
+void
+stm_usb_fs_wkup(void)
+{
+ /* USB wakeup, just clear the bit for now */
+ stm_usb.istr &= ~(1 << STM_USB_ISTR_WKUP);
+}
+
/* Queue the current IN buffer for transmission */
static void
-ao_usb_in_send(void)
+_ao_usb_in_send(void)
{
+ _tx_dbg0("in_send start");
debug ("send %d\n", ao_usb_tx_count);
+ while (ao_usb_in_pending)
+ ao_sleep(&ao_usb_in_pending);
ao_usb_in_pending = 1;
+ if (ao_usb_tx_count != AO_USB_IN_SIZE)
+ ao_usb_in_flushed = 1;
ao_usb_write(ao_usb_tx_buffer, ao_usb_in_tx_buffer, 0, ao_usb_tx_count);
ao_usb_bdt[AO_USB_IN_EPR].single.count_tx = ao_usb_tx_count;
- ao_usb_set_stat_tx(AO_USB_IN_EPR, STM_USB_EPR_STAT_TX_VALID);
ao_usb_tx_count = 0;
+ _ao_usb_set_stat_tx(AO_USB_IN_EPR, STM_USB_EPR_STAT_TX_VALID);
+ _tx_dbg0("in_send end");
}
-/* Wait for a free IN buffer */
+/* Wait for a free IN buffer. Interrupts are blocked */
static void
-ao_usb_in_wait(void)
+_ao_usb_in_wait(void)
{
for (;;) {
/* Check if the current buffer is writable */
if (ao_usb_tx_count < AO_USB_IN_SIZE)
break;
- cli();
+ _tx_dbg0("in_wait top");
/* Wait for an IN buffer to be ready */
while (ao_usb_in_pending)
ao_sleep(&ao_usb_in_pending);
- sei();
+ _tx_dbg0("in_wait bottom");
}
}
void
-ao_usb_flush(void) __critical
+ao_usb_flush(void)
{
if (!ao_usb_running)
return;
* packet was full, in which case we now
* want to send an empty packet
*/
- if (!ao_usb_in_flushed) {
- ao_usb_in_flushed = 1;
- cli();
- /* Wait for an IN buffer to be ready */
- while (ao_usb_in_pending)
- ao_sleep(&ao_usb_in_pending);
- sei();
- ao_usb_in_send();
+ ao_arch_block_interrupts();
+ while (!ao_usb_in_flushed) {
+ _tx_dbg0("flush top");
+ _ao_usb_in_send();
+ _tx_dbg0("flush end");
}
+ ao_arch_release_interrupts();
}
void
-ao_usb_putchar(char c) __critical __reentrant
+ao_usb_putchar(char c)
{
if (!ao_usb_running)
return;
- ao_usb_in_wait();
+ ao_arch_block_interrupts();
+ _ao_usb_in_wait();
ao_usb_in_flushed = 0;
ao_usb_tx_buffer[ao_usb_tx_count++] = (uint8_t) c;
/* Send the packet when full */
- if (ao_usb_tx_count == AO_USB_IN_SIZE)
- ao_usb_in_send();
+ if (ao_usb_tx_count == AO_USB_IN_SIZE) {
+ _tx_dbg0("putchar full");
+ _ao_usb_in_send();
+ _tx_dbg0("putchar flushed");
+ }
+ ao_arch_release_interrupts();
}
static void
-ao_usb_out_recv(void)
+_ao_usb_out_recv(void)
{
+ _rx_dbg0("out_recv top");
ao_usb_out_avail = 0;
ao_usb_rx_count = ao_usb_bdt[AO_USB_OUT_EPR].single.count_rx & STM_USB_BDT_COUNT_RX_COUNT_RX_MASK;
+ _rx_dbg1("out_recv count", ao_usb_rx_count);
debug ("recv %d\n", ao_usb_rx_count);
debug_data("Fill OUT len %d:", ao_usb_rx_count);
ao_usb_read(ao_usb_rx_buffer, ao_usb_out_rx_buffer, 0, ao_usb_rx_count);
ao_usb_rx_pos = 0;
/* ACK the packet */
- ao_usb_set_stat_rx(AO_USB_OUT_EPR, STM_USB_EPR_STAT_RX_VALID);
+ _ao_usb_set_stat_rx(AO_USB_OUT_EPR, STM_USB_EPR_STAT_RX_VALID);
}
-static char
+int
_ao_usb_pollchar(void)
{
- char c;
+ uint8_t c;
if (!ao_usb_running)
return AO_READ_AGAIN;
if (ao_usb_rx_pos != ao_usb_rx_count)
break;
+ _rx_dbg0("poll check");
/* Check to see if a packet has arrived */
- if (!ao_usb_out_avail)
+ if (!ao_usb_out_avail) {
+ _rx_dbg0("poll none");
return AO_READ_AGAIN;
- ao_usb_out_recv();
+ }
+ _ao_usb_out_recv();
}
/* Pull a character out of the fifo */
}
char
-ao_usb_pollchar(void)
-{
- char c;
- cli();
- c = _ao_usb_pollchar();
- sei();
- return c;
-}
-
-char
-ao_usb_getchar(void) __critical
+ao_usb_getchar(void)
{
- char c;
+ int c;
- cli();
+ ao_arch_block_interrupts();
while ((c = _ao_usb_pollchar()) == AO_READ_AGAIN)
- ao_sleep(&ao_stdin_ready);
- sei();
+ ao_sleep(AO_USB_OUT_SLEEP_ADDR);
+ ao_arch_release_interrupts();
return c;
}
void
ao_usb_disable(void)
{
+ ao_arch_block_interrupts();
stm_usb.cntr = (1 << STM_USB_CNTR_FRES);
stm_usb.istr = 0;
stm_usb.cntr = (1 << STM_USB_CNTR_PDWN) | (1 << STM_USB_CNTR_FRES);
/* Disable the interface */
- stm_rcc.apb1enr &+ ~(1 << STM_RCC_APB1ENR_USBEN);
+ stm_rcc.apb1enr &= ~(1 << STM_RCC_APB1ENR_USBEN);
+ ao_arch_release_interrupts();
}
void
* pulled low and doesn't work at all
*/
+ ao_arch_block_interrupts();
+
/* Route interrupts */
stm_nvic_set_priority(STM_ISR_USB_LP_POS, 3);
stm_nvic_set_enable(STM_ISR_USB_LP_POS);
/* Clear any spurious interrupts */
stm_usb.istr = 0;
-
+
debug ("ao_usb_enable\n");
/* Enable interrupts */
(0 << STM_USB_CNTR_PDWN) |
(0 << STM_USB_CNTR_FRES));
+ ao_arch_release_interrupts();
+
for (t = 0; t < 1000; t++)
ao_arch_nop();
/* Enable USB pull-up */
ao_usb_enable();
debug ("ao_usb_init\n");
- ao_add_task(&ao_usb_task, ao_usb_ep0, "usb");
+ ao_usb_ep0_state = AO_USB_EP0_IDLE;
#if USB_ECHO
ao_add_task(&ao_usb_echo_task, ao_usb_echo, "usb echo");
#endif
ao_cmd_register(&ao_usb_cmds[0]);
#endif
#if !USB_ECHO
- ao_add_stdio(ao_usb_pollchar, ao_usb_putchar, ao_usb_flush);
+#if USE_USB_STDIO
+ ao_add_stdio(_ao_usb_pollchar, ao_usb_putchar, ao_usb_flush);
+#endif
#endif
}
+
+#if TX_DBG || RX_DBG
+
+struct ao_usb_dbg {
+ int line;
+ char *msg;
+ uint32_t value;
+ uint32_t primask;
+#if TX_DBG
+ uint16_t in_count;
+ uint32_t in_epr;
+ uint32_t in_pending;
+ uint32_t tx_count;
+ uint32_t in_flushed;
+#endif
+#if RX_DBG
+ uint8_t rx_count;
+ uint8_t rx_pos;
+ uint8_t out_avail;
+ uint32_t out_epr;
+#endif
+};
+
+#define NUM_USB_DBG 128
+
+static struct ao_usb_dbg dbg[128];
+static int dbg_i;
+
+static void _dbg(int line, char *msg, uint32_t value)
+{
+ uint32_t primask;
+ dbg[dbg_i].line = line;
+ dbg[dbg_i].msg = msg;
+ dbg[dbg_i].value = value;
+ asm("mrs %0,primask" : "=&r" (primask));
+ dbg[dbg_i].primask = primask;
+#if TX_DBG
+ dbg[dbg_i].in_count = in_count;
+ dbg[dbg_i].in_epr = stm_usb.epr[AO_USB_IN_EPR];
+ dbg[dbg_i].in_pending = ao_usb_in_pending;
+ dbg[dbg_i].tx_count = ao_usb_tx_count;
+ dbg[dbg_i].in_flushed = ao_usb_in_flushed;
+#endif
+#if RX_DBG
+ dbg[dbg_i].rx_count = ao_usb_rx_count;
+ dbg[dbg_i].rx_pos = ao_usb_rx_pos;
+ dbg[dbg_i].out_avail = ao_usb_out_avail;
+ dbg[dbg_i].out_epr = stm_usb.epr[AO_USB_OUT_EPR];
+#endif
+ if (++dbg_i == NUM_USB_DBG)
+ dbg_i = 0;
+}
+#endif
projects / fw / altos / blobdiff