*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
#include <ao_tracker.h>
#endif
-__xdata struct ao_config ao_config;
-__pdata uint8_t ao_config_loaded;
-__pdata uint8_t ao_config_dirty;
-__xdata uint8_t ao_config_mutex;
+struct ao_config ao_config;
+uint8_t ao_config_loaded;
+uint8_t ao_config_dirty;
+uint8_t ao_config_mutex;
+
+#if HAS_FORCE_FREQ
+uint8_t ao_force_freq;
+#endif
+
+#ifndef HAS_CONFIG_SAVE
+#define HAS_CONFIG_SAVE HAS_EEPROM
+#endif
#ifndef AO_CONFIG_DEFAULT_APRS_INTERVAL
#define AO_CONFIG_DEFAULT_APRS_INTERVAL 0
#define AO_CONFIG_DEFAULT_IGNITE_MODE AO_IGNITE_MODE_DUAL
#define AO_CONFIG_DEFAULT_PAD_ORIENTATION AO_PAD_ORIENTATION_ANTENNA_UP
#define AO_CONFIG_DEFAULT_PYRO_TIME AO_MS_TO_TICKS(50)
-#if HAS_EEPROM
+#if HAS_CONFIG_SAVE
#ifndef USE_INTERNAL_FLASH
#error Please define USE_INTERNAL_FLASH
#endif
#endif
+
#ifndef AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX
-#if USE_INTERNAL_FLASH
-#define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX ao_storage_config
-#else
-#define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX ((uint32_t) 192 * (uint32_t) 1024)
-#endif
+# if FLIGHT_LOG_APPEND
+# define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX ao_storage_log_max
+# else
+# if USE_INTERNAL_FLASH
+# define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX ao_storage_config
+# else
+# define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX ((uint32_t) 192 * (uint32_t) 1024)
+# endif
+# endif
#endif
+
#ifndef AO_CONFIG_DEFAULT_RADIO_POWER
#define AO_CONFIG_DEFAULT_RADIO_POWER 0x60
#endif
#define AO_CONFIG_DEFAULT_APRS_SSID (ao_serial_number % 10)
#define AO_CONFIG_DEFAULT_RADIO_RATE AO_RADIO_RATE_38400
-#if HAS_EEPROM
+#if HAS_CONFIG_SAVE
static void
_ao_config_put(void)
{
#endif
#if HAS_RADIO
+
+#if HAS_RADIO_FORWARD
+uint32_t ao_send_radio_setting;
+#endif
+
void
ao_config_set_radio(void)
{
ao_config.radio_setting = ao_freq_to_set(ao_config.frequency, ao_config.radio_cal);
+#if HAS_RADIO_FORWARD
+ ao_send_radio_setting = ao_freq_to_set(ao_config.send_frequency, ao_config.radio_cal);
+#endif
}
#endif /* HAS_RADIO */
if (ao_config_loaded)
return;
-#if HAS_EEPROM
+#if HAS_CONFIG_SAVE
/* Yes, I know ao_storage_read calls ao_storage_setup,
* but ao_storage_setup *also* sets ao_storage_config, which we
* need before calling ao_storage_read here
/* Version 0 stuff */
ao_config.main_deploy = AO_CONFIG_DEFAULT_MAIN_DEPLOY;
ao_xmemset(&ao_config.callsign, '\0', sizeof (ao_config.callsign));
- ao_xmemcpy(&ao_config.callsign, CODE_TO_XDATA(AO_CONFIG_DEFAULT_CALLSIGN),
+ ao_xmemcpy(&ao_config.callsign, AO_CONFIG_DEFAULT_CALLSIGN,
sizeof(AO_CONFIG_DEFAULT_CALLSIGN) - 1);
ao_config._legacy_radio_channel = 0;
}
#if HAS_RADIO_RATE
if (minor < 20)
ao_config.radio_rate = AO_CONFIG_DEFAULT_RADIO_RATE;
+#endif
+#if HAS_RADIO_FORWARD
+ if (minor < 21)
+ ao_config.send_frequency = 434550;
+#endif
+#if HAS_APRS
+ if (minor < 22)
+ ao_config.aprs_format = AO_CONFIG_DEFAULT_APRS_FORMAT;
+#endif
+#if HAS_FIXED_PAD_BOX
+ if (minor < 22)
+ ao_config.pad_box = 1;
+ if (minor < 23)
+ ao_config.pad_idle = 120;
#endif
ao_config.minor = AO_CONFIG_MINOR;
ao_config_dirty = 1;
if (ao_force_freq) {
ao_config.frequency = 434550;
ao_config.radio_cal = ao_radio_cal;
- ao_xmemcpy(&ao_config.callsign, CODE_TO_XDATA(AO_CONFIG_DEFAULT_CALLSIGN),
+#if HAS_RADIO_RATE
+ ao_config.radio_rate = AO_CONFIG_DEFAULT_RADIO_RATE;
+#endif
+ ao_xmemcpy(&ao_config.callsign, AO_CONFIG_DEFAULT_CALLSIGN,
sizeof(AO_CONFIG_DEFAULT_CALLSIGN) - 1);
}
#endif
ao_mutex_put(&ao_config_mutex);
}
-void
+#if HAS_RADIO
+
+static void
ao_config_callsign_show(void)
{
printf ("Callsign: \"%s\"\n", ao_config.callsign);
}
-void
-ao_config_callsign_set(void) __reentrant
+static void
+ao_config_callsign_set(void)
{
uint8_t c;
- static __xdata char callsign[AO_MAX_CALLSIGN + 1];
+ static char callsign[AO_MAX_CALLSIGN + 1];
ao_xmemset(callsign, '\0', sizeof callsign);
ao_cmd_white();
_ao_config_edit_finish();
}
-#if HAS_RADIO
-
-void
-ao_config_frequency_show(void) __reentrant
+static void
+ao_config_frequency_show(void)
{
printf("Frequency: %ld\n",
ao_config.frequency);
}
+static void
+ao_config_frequency_set(void)
+{
+ uint32_t r = ao_cmd_decimal();
+ if (ao_cmd_status != ao_cmd_success)
+ return;
+ _ao_config_edit_start();
+ ao_config.frequency = r;
+ ao_config_set_radio();
+ _ao_config_edit_finish();
+#if HAS_RADIO_RECV
+ ao_radio_recv_abort();
+#endif
+}
+
+#endif
+
+#if HAS_RADIO_FORWARD
+void
+ao_config_send_frequency_show(void)
+{
+ printf("Send frequency: %ld\n",
+ ao_config.send_frequency);
+}
+
void
-ao_config_frequency_set(void) __reentrant
+ao_config_send_frequency_set(void)
{
ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.frequency = ao_cmd_lex_u32;
+ ao_config.send_frequency = ao_cmd_lex_u32;
ao_config_set_radio();
_ao_config_edit_finish();
#if HAS_RADIO_RECV
#if HAS_FLIGHT
-void
-ao_config_main_deploy_show(void) __reentrant
+static void
+ao_config_main_deploy_show(void)
{
printf("Main deploy: %d meters\n",
ao_config.main_deploy);
}
-void
-ao_config_main_deploy_set(void) __reentrant
+static void
+ao_config_main_deploy_set(void)
{
- ao_cmd_decimal();
+ uint32_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.main_deploy = ao_cmd_lex_i;
+ ao_config.main_deploy = r;
_ao_config_edit_finish();
}
#if HAS_ACCEL
-void
-ao_config_accel_calibrate_show(void) __reentrant
+static void
+ao_config_accel_calibrate_show(void)
{
printf("Accel cal +1g: %d -1g: %d\n",
ao_config.accel_plus_g, ao_config.accel_minus_g);
#endif
static int16_t
-ao_config_accel_calibrate_auto(char *orientation) __reentrant
+ao_config_accel_calibrate_auto(char *orientation)
{
uint16_t i;
int32_t accel_total;
accel_total = 0;
cal_data_ring = ao_sample_data;
while (i) {
- ao_sleep(DATA_TO_XDATA(&ao_sample_data));
+ ao_sleep(&ao_sample_data);
while (i && cal_data_ring != ao_sample_data) {
accel_total += (int32_t) ao_data_accel(&ao_data_ring[cal_data_ring]);
#if HAS_GYRO
return accel_total >> ACCEL_CALIBRATE_SHIFT;
}
-void
-ao_config_accel_calibrate_set(void) __reentrant
+static void
+ao_config_accel_calibrate_set(void)
{
int16_t up, down;
+ uint16_t r;
#if HAS_GYRO
int16_t accel_along_up = 0, accel_along_down = 0;
int16_t accel_across_up = 0, accel_across_down = 0;
int16_t accel_through_up = 0, accel_through_down = 0;
#endif
- ao_cmd_decimal();
+ r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
- if (ao_cmd_lex_i == 0) {
+ if (r == 0) {
up = ao_config_accel_calibrate_auto("up");
#if HAS_GYRO
accel_along_up = accel_cal_along;
accel_through_down = accel_cal_through;
#endif
} else {
- up = ao_cmd_lex_i;
- ao_cmd_decimal();
+ up = r;
+ r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
- down = ao_cmd_lex_i;
+ down = r;
}
if (up >= down) {
printf("Invalid accel: up (%d) down (%d)\n",
ao_config.accel_plus_g = up;
ao_config.accel_minus_g = down;
#if HAS_GYRO
- if (ao_cmd_lex_i == 0) {
+ if (r == 0) {
ao_config.accel_zero_along = (accel_along_up + accel_along_down) / 2;
ao_config.accel_zero_across = (accel_across_up + accel_across_down) / 2;
ao_config.accel_zero_through = (accel_through_up + accel_through_down) / 2;
}
#endif /* HAS_ACCEL */
-void
-ao_config_apogee_delay_show(void) __reentrant
+static void
+ao_config_apogee_delay_show(void)
{
printf("Apogee delay: %d seconds\n",
ao_config.apogee_delay);
}
-void
-ao_config_apogee_delay_set(void) __reentrant
+static void
+ao_config_apogee_delay_set(void)
{
- ao_cmd_decimal();
+ uint32_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.apogee_delay = ao_cmd_lex_i;
+ ao_config.apogee_delay = r;
_ao_config_edit_finish();
}
-void
-ao_config_apogee_lockout_show(void) __reentrant
+static void
+ao_config_apogee_lockout_show(void)
{
printf ("Apogee lockout: %d seconds\n",
ao_config.apogee_lockout);
}
-void
-ao_config_apogee_lockout_set(void) __reentrant
+static void
+ao_config_apogee_lockout_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.apogee_lockout = ao_cmd_lex_i;
+ ao_config.apogee_lockout = r;
_ao_config_edit_finish();
}
#endif /* HAS_FLIGHT */
#if HAS_RADIO
-void
-ao_config_radio_cal_show(void) __reentrant
+static void
+ao_config_radio_cal_show(void)
{
printf("Radio cal: %ld\n", ao_config.radio_cal);
}
-void
-ao_config_radio_cal_set(void) __reentrant
+static void
+ao_config_radio_cal_set(void)
{
- ao_cmd_decimal();
+ uint32_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.radio_cal = ao_cmd_lex_u32;
+ ao_config.radio_cal = r;
ao_config_set_radio();
_ao_config_edit_finish();
}
#error Please define HAS_TELEMETRY
#endif
-void
-ao_config_radio_rate_show(void) __reentrant
+static void
+ao_config_radio_rate_show(void)
{
printf("Telemetry rate: %d\n", ao_config.radio_rate);
}
-void
-ao_config_radio_rate_set(void) __reentrant
+static void
+ao_config_radio_rate_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
- if (AO_RADIO_RATE_MAX < ao_cmd_lex_i) {
+ if (AO_RADIO_RATE_MAX < r) {
ao_cmd_status = ao_cmd_lex_error;
return;
}
_ao_config_edit_start();
- ao_config.radio_rate = ao_cmd_lex_i;
+ ao_config.radio_rate = r;
+ _ao_config_edit_finish();
#if HAS_TELEMETRY
ao_telemetry_reset_interval();
#endif
- _ao_config_edit_finish();
#if HAS_RADIO_RECV
ao_radio_recv_abort();
#endif
#endif
#if HAS_LOG
-void
-ao_config_log_show(void) __reentrant
+
+static void
+ao_config_log_show(void)
{
printf("Max flight log: %d kB\n", (int16_t) (ao_config.flight_log_max >> 10));
+#if FLIGHT_LOG_APPEND
+ printf("Log fixed: 1\n");
+#endif
}
+#if FLIGHT_LOG_APPEND && HAS_CONFIG_SAVE
void
-ao_config_log_set(void) __reentrant
+ao_config_log_fix_append(void)
+{
+ _ao_config_edit_start();
+ ao_config.flight_log_max = ao_storage_log_max;
+ _ao_config_edit_finish();
+ ao_mutex_get(&ao_config_mutex);
+ _ao_config_put();
+ ao_config_dirty = 0;
+ ao_mutex_put(&ao_config_mutex);
+}
+#endif
+
+static void
+ao_config_log_set(void)
{
+#if FLIGHT_LOG_APPEND
+ printf("Flight log fixed size %d kB\n", ao_storage_log_max >> 10);
+#else
uint16_t block = (uint16_t) (ao_storage_block >> 10);
uint16_t log_max = (uint16_t) (ao_storage_log_max >> 10);
+ uint32_t r;
- ao_cmd_decimal();
+ r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
if (ao_log_present())
printf("Storage must be empty before changing log size\n");
- else if (block > 1024 && (ao_cmd_lex_i & (block - 1)))
+ else if (block > 1024 && (r & (block - 1)))
printf("Flight log size must be multiple of %d kB\n", block);
- else if (ao_cmd_lex_i > log_max)
+ else if (r > log_max)
printf("Flight log max %d kB\n", log_max);
else {
_ao_config_edit_start();
- ao_config.flight_log_max = (uint32_t) ao_cmd_lex_i << 10;
+ ao_config.flight_log_max = r << 10;
_ao_config_edit_finish();
}
+#endif
}
#endif /* HAS_LOG */
#if HAS_IGNITE
-void
-ao_config_ignite_mode_show(void) __reentrant
+static void
+ao_config_ignite_mode_show(void)
{
printf("Ignite mode: %d\n", ao_config.ignite_mode);
}
-void
-ao_config_ignite_mode_set(void) __reentrant
+static void
+ao_config_ignite_mode_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.ignite_mode = ao_cmd_lex_i;
+ ao_config.ignite_mode = r;
_ao_config_edit_finish();
}
#endif
#if HAS_ACCEL
-void
-ao_config_pad_orientation_show(void) __reentrant
+static void
+ao_config_pad_orientation_show(void)
{
printf("Pad orientation: %d\n", ao_config.pad_orientation);
}
-#ifndef AO_ACCEL_INVERT
-#define AO_ACCEL_INVERT 0x7fff
-#endif
-
-void
-ao_config_pad_orientation_set(void) __reentrant
+static void
+ao_config_pad_orientation_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal() & 1;
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_cmd_lex_i &= 1;
- if (ao_config.pad_orientation != ao_cmd_lex_i) {
- int16_t t;
+ if (ao_config.pad_orientation != r) {
+ accel_t t;
t = ao_config.accel_plus_g;
- ao_config.accel_plus_g = AO_ACCEL_INVERT - ao_config.accel_minus_g;
- ao_config.accel_minus_g = AO_ACCEL_INVERT - t;
+ ao_config.accel_plus_g = ao_data_accel_invert(ao_config.accel_minus_g);
+ ao_config.accel_minus_g = ao_data_accel_invert(t);
}
- ao_config.pad_orientation = ao_cmd_lex_i;
+ ao_config.pad_orientation = r;
_ao_config_edit_finish();
}
#endif
#if HAS_RADIO
-void
-ao_config_radio_enable_show(void) __reentrant
+static void
+ao_config_radio_enable_show(void)
{
printf("Radio enable: %d\n", ao_config.radio_enable);
}
-void
-ao_config_radio_enable_set(void) __reentrant
+static void
+ao_config_radio_enable_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.radio_enable = ao_cmd_lex_i;
+ ao_config.radio_enable = r;
_ao_config_edit_finish();
+#if HAS_TELEMETRY && HAS_RADIO_RATE
+ ao_telemetry_reset_interval();
+#endif
}
#endif /* HAS_RADIO */
#if HAS_AES
-__xdata uint8_t ao_config_aes_seq = 1;
+uint8_t ao_config_aes_seq = 1;
-void
-ao_config_key_show(void) __reentrant
+static void
+ao_config_key_show(void)
{
uint8_t i;
printf("AES key: ");
printf("\n");
}
-void
-ao_config_key_set(void) __reentrant
+static void
+ao_config_key_set(void)
{
uint8_t i;
_ao_config_edit_start();
for (i = 0; i < AO_AES_LEN; i++) {
- ao_cmd_hexbyte();
+ uint8_t b = ao_cmd_hexbyte();
if (ao_cmd_status != ao_cmd_success)
break;
- ao_config.aes_key[i] = ao_cmd_lex_i;
+ ao_config.aes_key[i] = b;
}
++ao_config_aes_seq;
_ao_config_edit_finish();
#if HAS_APRS
-void
+static void
ao_config_aprs_show(void)
{
printf ("APRS interval: %d\n", ao_config.aprs_interval);
}
-void
+static void
ao_config_aprs_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.aprs_interval = ao_cmd_lex_i;
+ ao_config.aprs_interval = r;
_ao_config_edit_finish();
+ ao_telemetry_reset_interval();
}
#endif /* HAS_APRS */
void
ao_config_radio_amp_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.radio_amp = ao_cmd_lex_i;
+ ao_config.radio_amp = r;
_ao_config_edit_finish();
}
void
ao_config_radio_power_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.radio_power = ao_cmd_lex_i;
+ ao_config.radio_power = r;
_ao_config_edit_finish();
}
#endif
#if HAS_BEEP_CONFIG
-void
+static void
ao_config_beep_show(void)
{
printf ("Beeper setting: %d\n", ao_config.mid_beep);
}
-void
+static void
ao_config_beep_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.mid_beep = ao_cmd_lex_i;
+ ao_config.mid_beep = r;
_ao_config_edit_finish();
}
#endif
#if HAS_TRACKER
-void
+static void
ao_config_tracker_show(void)
{
printf ("Tracker setting: %d %d\n",
ao_config.tracker_interval);
}
-void
+static void
ao_config_tracker_set(void)
{
uint16_t m, i;
- ao_cmd_decimal();
+ m = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
- m = ao_cmd_lex_i;
- ao_cmd_decimal();
+ i = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
- i = ao_cmd_lex_i;
_ao_config_edit_start();
ao_config.tracker_motion = m;
ao_config.tracker_interval = i;
_ao_config_edit_finish();
+#if HAS_TELEMETRY
+ ao_telemetry_reset_interval();
+#endif
}
#endif /* HAS_TRACKER */
#if AO_PYRO_NUM
-void
+static void
ao_config_pyro_time_show(void)
{
printf ("Pyro time: %d\n", ao_config.pyro_time);
}
-void
+static void
ao_config_pyro_time_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
_ao_config_edit_start();
- ao_config.pyro_time = ao_cmd_lex_i;
+ ao_config.pyro_time = r;
_ao_config_edit_finish();
}
#endif
#if HAS_APRS
-void
+static void
ao_config_aprs_ssid_show(void)
{
printf ("APRS SSID: %d\n",
ao_config.aprs_ssid);
}
-void
+static void
ao_config_aprs_ssid_set(void)
{
- ao_cmd_decimal();
+ uint16_t r = ao_cmd_decimal();
if (ao_cmd_status != ao_cmd_success)
return;
- if (15 < ao_cmd_lex_i) {
+ if (15 < r) {
ao_cmd_status = ao_cmd_lex_error;
return;
}
_ao_config_edit_start();
- ao_config.aprs_ssid = ao_cmd_lex_i;
+ ao_config.aprs_ssid = r;
+ _ao_config_edit_finish();
+}
+
+static void
+ao_config_aprs_format_set(void)
+{
+ uint16_t r = ao_cmd_decimal();
+ if (ao_cmd_status != ao_cmd_success)
+ return;
+ _ao_config_edit_start();
+ ao_config.aprs_format = r != 0;
_ao_config_edit_finish();
}
+
+static void
+ao_config_aprs_format_show(void)
+{
+ printf ("APRS format: %d\n", ao_config.aprs_format);
+}
#endif /* HAS_APRS */
+#if HAS_FIXED_PAD_BOX
+static void
+ao_config_pad_box_show(void)
+{
+ printf ("Pad box: %d\n", ao_config.pad_box);
+}
+
+static void
+ao_config_pad_box_set(void)
+{
+ uint16_t r = ao_cmd_decimal();
+ if (ao_cmd_status != ao_cmd_success)
+ return;
+ _ao_config_edit_start();
+ ao_config.pad_box = r;
+ _ao_config_edit_finish();
+}
+
+static void
+ao_config_pad_idle_show(void)
+{
+ printf ("Idle timeout: %d\n", ao_config.pad_idle);
+}
+
+static void
+ao_config_pad_idle_set(void)
+{
+ uint16_t r = ao_cmd_decimal();
+ if (ao_cmd_status != ao_cmd_success)
+ return;
+ _ao_config_edit_start();
+ ao_config.pad_idle = r;
+ _ao_config_edit_finish();
+}
+#endif
+
struct ao_config_var {
- __code char *str;
- void (*set)(void) __reentrant;
- void (*show)(void) __reentrant;
+ const char *str;
+ void (*set)(void);
+ void (*show)(void);
};
static void
-ao_config_help(void) __reentrant;
+ao_config_help(void);
static void
-ao_config_show(void) __reentrant;
+ao_config_show(void);
-#if HAS_EEPROM
+#if HAS_CONFIG_SAVE
static void
-ao_config_save(void) __reentrant;
+ao_config_save(void);
#endif
-__code struct ao_config_var ao_config_vars[] = {
+const struct ao_config_var ao_config_vars[] = {
#if HAS_FLIGHT
{ "m <meters>\0Main deploy (m)",
ao_config_main_deploy_set, ao_config_main_deploy_show, },
#if HAS_RADIO
{ "F <freq>\0Frequency (kHz)",
ao_config_frequency_set, ao_config_frequency_show },
+#if HAS_RADIO_FORWARD
+ { "R <freq>\0Repeater output frequency (kHz)",
+ ao_config_send_frequency_set, ao_config_send_frequency_show },
+#endif
{ "c <call>\0Callsign (8 char max)",
ao_config_callsign_set, ao_config_callsign_show },
{ "e <0 disable, 1 enable>\0Enable telemetry and RDF",
#if HAS_APRS
{ "S <ssid>\0Set APRS SSID (0-15)",
ao_config_aprs_ssid_set, ao_config_aprs_ssid_show },
+ { "C <0 compressed, 1 uncompressed>\0APRS format",
+ ao_config_aprs_format_set, ao_config_aprs_format_show },
+#endif
+#if HAS_FIXED_PAD_BOX
+ { "B <box>\0Set pad box (1-99)",
+ ao_config_pad_box_set, ao_config_pad_box_show },
+ { "i <seconds>\0Set idle timeout (0 disable)",
+ ao_config_pad_idle_set, ao_config_pad_idle_show },
#endif
{ "s\0Show",
ao_config_show, 0 },
-#if HAS_EEPROM
+#if HAS_CONFIG_SAVE
{ "w\0Write to eeprom",
ao_config_save, 0 },
#endif
{ 0, 0, 0 }
};
-void
+static void
ao_config_set(void)
{
char c;
}
static void
-ao_config_help(void) __reentrant
+ao_config_help(void)
{
uint8_t cmd;
for (cmd = 0; ao_config_vars[cmd].str != NULL; cmd++)
}
static void
-ao_config_show(void) __reentrant
+ao_config_show(void)
{
uint8_t cmd;
ao_config_get();
#endif
}
-#if HAS_EEPROM
+#if HAS_CONFIG_SAVE
static void
-ao_config_save(void) __reentrant
+ao_config_save(void)
{
uint8_t saved = 0;
ao_mutex_get(&ao_config_mutex);
}
#endif
-__code struct ao_cmds ao_config_cmds[] = {
+const struct ao_cmds ao_config_cmds[] = {
{ ao_config_set, "c <var> <value>\0Set config (? for help, s to show)" },
{ 0, NULL },
};
projects / fw / altos / blobdiff