altos: Remove ao_radio_gpio_bits from normal build

[fw/altos] / src / drivers / ao_cc115l.c

diff --git a/src/drivers/ao_cc115l.c b/src/drivers/ao_cc115l.c
index 30c56442093a5671f20ca088d2c569403f08ef2e..56afc3c75229c98aed314f1a92eca82ae4b6ed69 100644 (file)
--- a/src/drivers/ao_cc115l.c
+++ b/src/drivers/ao_cc115l.c
@@ -328,11 +328,13 @@ static const uint16_t rdf_setup[] = {
 };
 
 /*
- * APRS deviation is the same as RDF
+ * APRS deviation is 3kHz
+ *
+ * 26e6 / (2 ** 17) * (8 + 7) * (2 ** 0) = 2975
  */
 
-#define APRS_DEV_E     RDF_DEV_E
-#define APRS_DEV_M     RDF_DEV_M
+#define APRS_DEV_E     0
+#define APRS_DEV_M     7
 
 /*
  * For our APRS beacon, set the symbol rate to 9.6kBaud (8x oversampling for 1200 baud data rate)
@@ -653,12 +655,14 @@ ao_radio_test_cmd(void)
        }
 }
 
+#if CC115L_TRACE
 static inline int16_t
 ao_radio_gpio_bits(void)
 {
        return AO_CC115L_DONE_INT_PORT->idr & ((1 << AO_CC115L_FIFO_INT_PIN) |
                                               (1 << AO_CC115L_DONE_INT_PIN));
 }
+#endif
 
 static void
 ao_radio_wait_fifo(void)