doc: Remove telemini v2.0. Add telemega v2.0

[fw/altos] / doc / telemega.inc

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 4383f228e34af27ccbb119081c0cacea171a99f2..55f77bc48771d6db476df1adb85c4325cdd0378e 100644 (file)
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -9,6 +9,18 @@
        the board is aligned with the flight axis. It can be mounted
        either antenna up or down.
 
+       TeleMega v2.0 has a few minor changes from v1.0:
+
+       * Companion connector matches EasyMega functions
+       * Serial port connector replaced with servo connector with
+         support for up to 4 PWM channels.
+       * Radio switched from cc1120 to cc1200.
+
+       None of these affect operation using the stock firmware, but
+       they do mean that the device needs different firmware to
+       operate correctly, so make sure you load the right firmware
+       when reflashing the device.
+
        === TeleMega Screw Terminals
 
                TeleMega has two sets of nine screw terminals on the end of