doc: Switch to asciidoctor to format docs

[fw/altos] / doc / telemega.inc

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 4383f228e34af27ccbb119081c0cacea171a99f2..0975172f6c6f189dd5ba55f72b3079938eb382a7 100644 (file)
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -1,7 +1,7 @@
 == TeleMega
 
        .TeleMega Board
-       image::telemega-v1.0-top.jpg[width="5.5in"]
+       image::telemega-v1.0-top.jpg[width=400]
 
        TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
        designed to easily fit in a 38mm coupler. Like TeleMetrum,
@@ -9,6 +9,18 @@
        the board is aligned with the flight axis. It can be mounted
        either antenna up or down.
 
+       TeleMega v2.0 has a few minor changes from v1.0:
+
+       * Companion connector matches EasyMega functions
+       * Serial port connector replaced with servo connector with
+         support for up to 4 PWM channels.
+       * Radio switched from cc1120 to cc1200.
+
+       None of these affect operation using the stock firmware, but
+       they do mean that the device needs different firmware to
+       operate correctly, so make sure you load the right firmware
+       when reflashing the device.
+
        === TeleMega Screw Terminals
 
                TeleMega has two sets of nine screw terminals on the end of