Create release notes for 1.2.1

[fw/altos] / doc / release-notes-1.2.xsl

diff --git a/doc/release-notes-1.2.xsl b/doc/release-notes-1.2.xsl
index 610fa1a218f07d026e2189f495cce89dce430f6d..64ba46a90d2d269a4560d5b70a9cc1c576a56db9 100644 (file)
--- a/doc/release-notes-1.2.xsl
+++ b/doc/release-notes-1.2.xsl
@@ -4,75 +4,24 @@
 
 <article>
   <para>
 
 <article>
   <para>

-    Version 1.2 is a minor release. It provides a few new features in AltosUI
-    and the AltOS firmware and fixes bugs.
+    Version 1.2 is a major release. It adds support for MicroPeak and
+    the MicroPeak USB adapter.

   </para>
   <para>
     AltOS Firmware Changes
     <itemizedlist>
   </para>
   <para>
     AltOS Firmware Changes
     <itemizedlist>

-      <listitem>
-       In TeleMini recovery mode (when booted with the outer two
-       debug pins connected together), the radio parameters are also
-       set back to defaults (434.550MHz, N0CALL, factory radio cal).
-      </listitem>
-      <listitem>
-       Add support for reflashing the SkyTraq GPS chips. This
-       requires special host-side code which currently only exists
-       for Linux.
-      </listitem>

       <listitem>
        Add MicroPeak support. This includes support for the ATtiny85
        processor and adaptations to the core code to allow for
        devices too small to run the multi-tasking scheduler.
       </listitem>
       <listitem>
        Add MicroPeak support. This includes support for the ATtiny85
        processor and adaptations to the core code to allow for
        devices too small to run the multi-tasking scheduler.
       </listitem>

-      <listitem>
-       Correct Kalman filter model error covariance matrix. The
-       values used previously assumed continuous measurements instead
-       of discrete measurements.
-      </listitem>

     </itemizedlist>
   </para>
   <para>
     </itemizedlist>
   </para>
   <para>

-    AltosUI Changes
+    MicroPeak UI changes

     <itemizedlist>
       <listitem>
     <itemizedlist>
       <listitem>

-       Handle missing GPS lock in 'Descent' tab. Previously, if the
-       GPS position of the pad was unknown, an exception would be
-       raised, breaking the Descent tab contents.
-      </listitem>
-      <listitem>
-       Add preliminary MegaMetrum support, including configuration,
-       data download and analysis.
-      </listitem>
-      <listitem>
-       Improve the graph, adding tool-tips to show values near the
-       cursor and making the displayed set of values configurable,
-       adding all of the flight data as options while leaving the
-       default settings alone so that the graph starts by showing
-       height, speed and acceleration.
-      </listitem>
-      <listitem>
-       Make the initial position of the AltosUI top level window
-       configurable. Along with this change, the other windows will
-       pop up at 'sensible' places now, instead of on top of one
-       another.
-      </listitem>
-      <listitem>
-       Add callsign to Monitor idle window and connecting
-       dialogs. This makes it clear which callsign is being used so
-       that the operator will be aware that it must match the flight
-       computer value or no communication will work.
-      </listitem>
-      <listitem>
-       When downloading flight data, display the block number so that
-       the user has some sense of progress. Unfortunately, we don't
-       know how many blocks will need to be downloaded, but at least
-       it isn't just sitting there doing nothing for a long time.
-      </listitem>
-      <listitem>
-       Add GPS data and a map to the graph window. This lets you see
-       a complete summary of the flight without needing to 'replay'
-       the whole thing.
+       Added this new application

       </listitem>
     </itemizedlist>
   </para>
       </listitem>
     </itemizedlist>
   </para>