+++ /dev/null
-== Operation
-
- Operating an EasyMotor board is pretty easy. Turn the power on
- before launch, typically during the usual pre-flight electronics
- checklist after the rocket is installed on a launch rail.
-
- The board will beep out a Morse code "P" every few seconds
- indicating that it's in pad mode and ready to detect launch.
- Once launch is detected, the board logs pressure and acceleration
- data 100 times per second throughout the flight.
-
- After flight, AltosUI can be used to download the flight data,
- then export it to a comma separated values (CSV) file. Such a
- file can easily be loaded into a spreadsheet for analysis.
-