ao-tools: Use 'program' command in ao-flash-lpc instead of 'flash'

[fw/altos] / ao-tools / ao-flash / ao-flash-lpc

diff --git a/ao-tools/ao-flash/ao-flash-lpc b/ao-tools/ao-flash/ao-flash-lpc
old mode 100644 (file)
new mode 100755 (executable)
index 57f632b..7ac5b52
--- a/ao-tools/ao-flash/ao-flash-lpc
+++ b/ao-tools/ao-flash/ao-flash-lpc
@@ -7,15 +7,10 @@ case "$#" in
 esac
 cmds=/tmp/flash$$
 trap "rm $cmds" 0 1 15
 esac
 cmds=/tmp/flash$$
 trap "rm $cmds" 0 1 15

-for file in "$@"; do
-       echo "flash write_image $file"
-done > $cmds
+file="$1"
+echo "program $file verify reset" > $cmds

 openocd \
        -f interface/stlink-v2.cfg \
        -f target/lpc11u14.cfg \
 openocd \
        -f interface/stlink-v2.cfg \
        -f target/lpc11u14.cfg \

-       -c init \
-       -c 'reset halt' \

        -f $cmds \
        -f $cmds \

-       -c 'reset init' \
-        -c 'reset run' \

        -c shutdown
        -c shutdown