ao-tools: Add lots of compiler warning flags to ao-tools build

[fw/altos] / ao-tools / ao-dbg / ao-dbg.1

diff --git a/ao-tools/ao-dbg/ao-dbg.1 b/ao-tools/ao-dbg/ao-dbg.1
index a850c45407ed76b7e845c92ac2ea109bc1cee84f..53e766490aeb2c8ef0585d712b7b098dbe058843 100644 (file)
--- a/ao-tools/ao-dbg/ao-dbg.1
+++ b/ao-tools/ao-dbg/ao-dbg.1
@@ -35,6 +35,9 @@ ao-dbg \- hex debugger for cc1111 processors
 [\-h]
 [\-m]
 [\-T \fItty-device\fP]
+[\--tty \fItty-device\fP]
+[\-D \fIaltos-device\fP]
+[\--device \fIaltos-device\fP]
 .SH DESCRIPTION
 .I ao-dbg
 connects to a cc1111 processor through either a suitable cc1111 board
@@ -80,14 +83,29 @@ This should print a usage message, but does nothing useful currently.
 .IP "\-m"
 This option is not present in the original 8051 emulator, and causes ao-dbg to
 dump all commands and replies that are received from and sent to sdcdb.
-.IP "\-T"
+.TP
+\-T tty-device | --tty tty-device
 This selects which tty device the debugger uses to communicate with
 the target device. The special name 'BITBANG' directs ao-dbg to use
 the cp2103 connection, otherwise this should be a usb serial port
 connected to a suitable cc1111 debug node.
+.TP
+\-D AltOS-device | --device AltOS-device
+Search for a connected device. This requires an argument of one of the
+following forms:
+.IP
+TeleMetrum:2
+.br
+TeleMetrum
+.br
+2
+.IP
+Leaving out the product name will cause the tool to select a suitable
+product, leaving out the serial number will cause the tool to match
+one of the available devices.
 .SH COMMANDS
 Once started, ao-dbg connects to the cc1111 and then reads and
-executes commands, either from stdin, or the nework connection to
+executes commands, either from stdin, or the network connection to
 sdcdb.
 .PP
 Unlike the command line, ao-dbg contains built-in help for each of these
@@ -190,7 +208,7 @@ pins and then change the Port 1 data to set them high or low:
 > set sfr 0x90 0x00    # set P1_1 to low
 .IP "Reading the A/D converters"
 The six A/D converter inputs can each be connected to any of the P0 pins,
-ground, the A/D voltage refernece, an internal temperature sensor or VDD/3.
+ground, the A/D voltage reference, an internal temperature sensor or VDD/3.
 To read one of these values, select an A/D converter to use then start the
 conversion process. The cc1111 manual has the table for selecting the input
 on page 144.