Use --tty/-T on command line to specify target device

[fw/altos] / ao-tools / ao-dbg / ao-dbg.1

diff --git a/ao-tools/ao-dbg/ao-dbg.1 b/ao-tools/ao-dbg/ao-dbg.1
index f2f59a5286a6709fb96f4a66c5984cc381f3e680..1f544e5b199026459ea98d2db651ab108c49c26a 100644 (file)
--- a/ao-tools/ao-dbg/ao-dbg.1
+++ b/ao-tools/ao-dbg/ao-dbg.1
@@ -34,6 +34,7 @@ s51 \- hex debugger for cc1111 processors
 [\-H]
 [\-h]
 [\-m]
+[\-T \fItty-device\fP]
 .SH DESCRIPTION
 .I s51
 connects to a cc1111 processor through a cp1203-based USB-to-serial
@@ -78,6 +79,9 @@ This should print a usage message, but does nothing useful currently.
 .IP "\-m"
 This option is not present in the original 8051 emulator, and causes s51 to
 dump all commands and replies that are received from and sent to sdcdb.
+.IP "\-T"
+This selects which tty device the debugger uses to communicate with
+the target device.
 .SH COMMANDS
 Once started, s51 connects to the cc1111 via the CP2103 using libusb2 and
 then reads and executes commands, either from stdin, or the nework