move turnon_teledongle to new cal-freq code

[fw/altos] / ao-bringup / turnon_teledongle

diff --git a/ao-bringup/turnon_teledongle b/ao-bringup/turnon_teledongle
index 97c1e419b981bc6086a16e5f734914321268b164..d17e2b96caae76fef6281e3e35cee58af506a4e5 100755 (executable)
--- a/ao-bringup/turnon_teledongle
+++ b/ao-bringup/turnon_teledongle
@@ -1,28 +1,89 @@
 #!/bin/sh
 
-echo "TeleDongle v0.2 Turn-On and Calibration Program"
-echo "Copyright 2010 by Bdale Garbee.  Released under GPL v2"
+if [ -x ../ao-tools/ao-flash/ao-flash-lpc ]; then
+       FLASH_LPC=../ao-tools/ao-flash/ao-flash-lpc
+elif [ -x /usr/bin/ao-flash-lpc ]; then
+       FLASH_LPC=/usr/bin/ao-flash-lpc
+else
+       echo "Can't find ao-flash-lpc!  Aborting."
+       exit 1
+fi
+
+if [ -x /usr/bin/ao-usbload ]; then
+       USBLOAD=/usr/bin/ao-usbload
+else
+       echo "Can't find ao-usbload!  Aborting."
+       exit 1
+fi
+
+PRODUCT=teledongle
+PRODUCT_NAME=TeleDongle
+VERSION=3.0
+
+echo "$PRODUCT_NAME v$VERSION Turn-On and Calibration Program"
+echo "Copyright © 2015 by Bdale Garbee.  Released under GPL v2"
 echo
 echo "Expectations:"
-echo "\tTeleDongle v0.2 powered from USB"
-echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header"
-echo "\t\twith coax from SMA to frequency counter"
+echo "\t$PRODUCT_NAME v$VERSION powered from USB"
+echo "\t\twith ST-Link-V2 cabled to debug header"
+echo "\t\twith coax from UHF to frequency counter"
 echo
-echo -n "TeleDongle serial number: "
+echo -n "$PRODUCT_NAME-$VERSION serial number: "
 read SERIAL
 
-../ao-tools/ao-rawload/ao-rawload -r ao_led_blink.ihx
-echo "LEDs should be blinking"
+BINARIES=$HOME/altusmetrumllc/Binaries
+
+LOADER="$BINARIES/loaders/$PRODUCT-v$VERSION-"*.elf
+ALTOS="$BINARIES/$PRODUCT-v$VERSION"*.elf
+
+$FLASH_LPC $LOADER || exit 1
+
+sleep 2
+
+$USBLOAD --serial=$SERIAL $ALTOS || exit 1
+
 sleep 5
 
-../ao-tools/ao-rawload/ao-rawload -r ao_radio_xmit.ihx
-echo -n "Generating RF carrier.  Please enter measured frequency: "
-read FREQ
+dev=`ao-list | awk '/TeleDongle-v'"$VERSION"'/ { print $3; exit(0); }'`
+
+case "$dev" in
+/dev/tty*)
+       echo "TeleDongle found on $dev"
+       ;;
+*)
+       echo 'No TeleDongle-v'"$VERSION"' found'
+       exit 1
+       ;;
+esac
+
+echo 'E 0' > $dev
+
+SERIAL=$SERIAL ./cal-freq $dev
+
+case $? in
+    0)
+       ;;
+    *)
+       echo "Frequency calibration failed"
+       exit 1
+       ;;
+esac
+
+CAL_VALUE=`grep "^$SERIAL," cal_values | tail -1 | sed 's/^[^,]*,//'`
+
+case "$CAL_VALUE" in
+    [1-9]*)
+    ;;
+    *)
+       echo "Invalid calibration value: $CAL_VALUE"
+       exit 1
+       ;;
+esac
+
+echo "Reflashing with calibration: $CAL_VALUE"
 
-CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+$USBLOAD --cal=$CAL_VALUE --tty=$dev $ALTOS || exit 1
 
-echo "Programming flash with cal value " $CAL_VALUE
-ao-load --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2.ihx $SERIAL
+echo "$PRODUCT_NAME-v$VERSION $SERIAL is ready to ship"
 
-echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
-echo "Unplug and replug USB, cu to the board, confirm freq and record power"
+exit $?