#!/bin/sh

echo "TeleDongle v0.2 Turn-On and Calibration Program"
echo "Copyright 2010 by Bdale Garbee.  Released under GPL v2"
echo
echo "Expectations:"
echo "\tTeleDongle v0.2 powered from USB"
echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header"
echo "\t\twith coax from SMA to frequency counter"
echo
echo -n "TeleDongle serial number: "
read SERIAL

../ao-tools/ao-rawload/ao-rawload -r ao_led_blink.ihx
echo "LEDs should be blinking"
sleep 5

../ao-tools/ao-rawload/ao-rawload -r ao_radio_xmit.ihx
echo -n "Generating RF carrier.  Please enter measured frequency: "
read FREQ

CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`

echo "Programming flash with cal value " $CAL_VALUE
ao-load --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2.ihx $SERIAL

echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
echo "Unplug and replug USB, cu to the board, confirm freq and record power"