altos: ADS124S0X driver compiles now
[fw/altos] / src / teledongle-v3.0 / ao_pins.h
1 /*
2  * Copyright © 2012 Keith Packard <keithp@keithp.com>
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
12  * General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License along
15  * with this program; if not, write to the Free Software Foundation, Inc.,
16  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
17  */
18
19 /* Using TeleDongle v3.0 board */
20
21 #ifndef _AO_PINS_H_
22 #define _AO_PINS_H_
23
24 #define AO_STACK_SIZE   320
25
26 #define HAS_TASK_QUEUE          1
27
28 #define IS_FLASH_LOADER 0
29
30 /* Crystal on the board */
31 #define AO_LPC_CLKIN    12000000
32
33 /* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
34 #define AO_LPC_CLKOUT   48000000
35
36 /* System clock frequency */
37 #define AO_LPC_SYSCLK   24000000
38
39 #define HAS_EEPROM              0
40 #define USE_INTERNAL_FLASH      0
41 #define USE_STORAGE_CONFIG      0
42 #define USE_EEPROM_CONFIG       0
43
44 #define HAS_USB                 1
45 #define HAS_USB_CONNECT         0
46 #define HAS_USB_VBUS            0
47 #define HAS_USB_PULLUP          1
48 #define AO_USB_PULLUP_PORT      0
49 #define AO_USB_PULLUP_PIN       20
50
51 #define HAS_BEEP                0
52 #define HAS_RADIO               1
53 #define HAS_TELEMETRY           0
54 #define HAS_RSSI                0
55
56 #define HAS_SPI_0               1
57 #define SPI_SCK0_P0_6           1
58
59 #define PACKET_HAS_SLAVE        0
60 #define PACKET_HAS_MASTER       1
61
62 #define LOW_LEVEL_DEBUG         0
63
64 #define LED_PORT                0
65 #define LED_PIN_RED             14
66 #define LED_PIN_GREEN           7
67 #define AO_LED_RED              (1 << LED_PIN_RED)
68 #define AO_LED_GREEN            (1 << LED_PIN_GREEN)
69
70 #define LEDS_AVAILABLE          (AO_LED_RED | AO_LED_GREEN)
71
72 #define HAS_GPS                 0
73 #define HAS_FLIGHT              0
74 #define HAS_ADC                 0
75 #define HAS_LOG                 0
76
77 /*
78  * Telemetry monitoring
79  */
80 #define HAS_MONITOR             1
81 #define LEGACY_MONITOR          0
82 #define HAS_MONITOR_PUT         1
83 #define AO_MONITOR_LED          AO_LED_GREEN
84 #define AO_MONITOR_BAD          AO_LED_RED
85
86 /*
87  * Radio (cc1200)
88  */
89
90 /* gets pretty close to 434.550 */
91
92 #define AO_RADIO_CAL_DEFAULT    5695733
93
94 #define AO_FEC_DEBUG            0
95 #define AO_CC1200_SPI_CS_PORT   0
96 #define AO_CC1200_SPI_CS_PIN    3
97 #define AO_CC1200_SPI_BUS       0
98 #define AO_CC1200_SPI           0
99 #define AO_CC1200_SPI_SPEED     AO_SPI_SPEED_8MHz
100
101 #define AO_CC1200_INT_PORT      0
102 #define AO_CC1200_INT_PIN       2
103
104 #define AO_CC1200_INT_GPIO      2
105 #define AO_CC1200_INT_GPIO_IOCFG        CC1200_IOCFG2
106
107 /*
108  * Profiling Viterbi decoding
109  */
110
111 #ifndef AO_PROFILE
112 #define AO_PROFILE              0
113 #endif
114
115 #endif /* _AO_PINS_H_ */