Switch from GPLv2 to GPLv2+
[fw/altos] / src / chaoskey-v1.0 / ao_pins.h
1 /*
2  * Copyright © 2015 Keith Packard <keithp@keithp.com>
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
12  * General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License along
15  * with this program; if not, write to the Free Software Foundation, Inc.,
16  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
17  */
18
19 #ifndef _AO_PINS_H_
20 #define _AO_PINS_H_
21
22 #define LED_PORT_ENABLE STM_RCC_AHBENR_IOPBEN
23 #define LED_PORT        (&stm_gpiob)
24 #define LED_PIN_RED     4
25 #define AO_LED_RED      (1 << LED_PIN_RED)
26
27 #define LEDS_AVAILABLE  (AO_LED_RED)
28
29 #define AO_POWER_MANAGEMENT     1
30 #define AO_LED_POWER            AO_LED_RED
31
32 #define HAS_BEEP        0
33
34 /* 48MHz clock based on USB */
35 #define AO_HSI48        1
36
37 /* HCLK = 48MHz */
38 #define AO_AHB_PRESCALER        1
39 #define AO_RCC_CFGR_HPRE_DIV    STM_RCC_CFGR_HPRE_DIV_1
40
41 /* APB = 48MHz */
42 #define AO_APB_PRESCALER        1
43 #define AO_RCC_CFGR_PPRE_DIV    STM_RCC_CFGR_PPRE_DIV_1
44
45 #define HAS_USB                         1
46 #define AO_USB_DIRECTIO                 1
47 #define AO_PA11_PA12_RMP                1
48 #define AO_USB_DEVICE_CLASS             0xff
49 #define AO_USB_INTERFACE_CLASS_DATA     0xff
50 #define AO_USB_HAS_OUT                  0
51 #define AO_USB_HAS_IN                   1
52 #define AO_USB_HAS_IN2                  1
53 #define AO_USB_HAS_INT                  0
54 #define AO_USB_SELF_POWER               0
55 #define AO_USB_DEVICE_ID_SERIAL         1
56 #define AO_USB_START_DISABLED           1
57 #define USE_USB_STDIO                   0
58
59 #define IS_FLASH_LOADER 0
60
61 /* ADC */
62
63 #define AO_ADC_PIN0_PORT        (&stm_gpioa)
64 #define AO_ADC_PIN0_PIN         0
65 #define AO_ADC_PIN0_CH          0
66
67 #define AO_ADC_RCC_AHBENR       ((1 << STM_RCC_AHBENR_IOPAEN))
68
69 #define AO_NUM_ADC              1
70
71 /* TRNG enable */
72
73 #define AO_TRNG_ENABLE_PORT     (&stm_gpioa)
74 #define AO_TRNG_ENABLE_BIT      1
75
76 /* CRC */
77 #define AO_CRC_WIDTH    32
78 #define AO_CRC_INIT     0xffffffff
79
80 /* Mode pin */
81 #define AO_RAW_PORT             (&stm_gpioa)
82 #define AO_RAW_BIT              15
83
84 #endif /* _AO_PINS_H_ */