altos: Remove pdclib bits from Makefile
[fw/altos] / doc / release-notes-1.5.inc
1 = Release Notes for Version 1.5
2 :toc!:
3
4         Version 1.5 is a major release. It includes support for our new
5         EasyMega product, new features and bug fixes in in the flight
6         software for all our boards and the AltosUI ground station
7
8         == AltOS
9
10         AltOS New Features
11
12         * Add support for EasyMega boards.
13
14         * Make the APRS SSID be configurable. This lets you track
15           different rockets on the same receiver without getting
16           things mixed up.
17
18         * Report extra pyro channel continuity state on EasyMega and
19           TeleMega via the beeper. This lets you easily verify flight
20           readiness on these boards after powering up the electronics
21           on the rail.
22
23         * Add lower telemetry data rates (2400 and 9600 bps) to
24           increase telemetry radio range. This reduces the amount of
25           data received as well as increasing battery consumption in
26           the transmitter.
27
28         * Change TeleGPS to have only a single log, and append new
29           data to it rather than using seperate per-flight logs. This
30           avoids accidentally filling up log storage by turning
31           TeleGPS on/off several times.
32
33         AltOS Fixes
34
35         * Increase the maximum range for altitude values from +/-32767m
36           to +/-2147483647m, allowing the flight computers to function
37           correctly above the 32km level.
38
39         * Continuously test pyro firing conditions during delay stage,
40           inhibiting the pyro channel if the test fails. This prevents
41           firing pyro charges where the conditions were good before
42           the delay, but become bad before the delay expires.
43
44         * Allow negative numbers in pyro configuration values. This
45           lets you specify things like descending speed or
46           deceleration.
47
48         == AltosUI and TeleGPS Applications
49
50         AltosUI and TeleGPS New Features
51
52         * Support telemetry baud rate selection. Adds menus to
53           the flight monitoring and configuration for baud rate
54           selection.
55
56         * Support APRS SSID configuration.
57
58         * Integrate with file managers. This provides icons for all of
59           our file types and associates our application with the files
60           so that using a file manager to open a AltOS data file
61           results in launching our application.
62
63         AltosUI Fixes
64
65         * Make the 'Graph' button on the landed tab work again.
66
67         * Make tests for Java on Windows a bit smarter, and also
68           provide the user with the option to skip installing Java for
69           cases where we just can't figure out what version is installed.