1 altos (0.6+292+g8fc261c) unstable; urgency=low
3 * see if my new freetts package works
5 -- Bdale Garbee <bdale@gag.com> Sat, 31 Jul 2010 10:55:21 -0600
7 altos (0.6+290+g7877496) unstable; urgency=low
10 * altosui: check for closed serial device before reading
11 * altosui: Remove unnecessary freetts .jar files
12 * altosui: Close serial, join reader thread, free altos_file
13 * altosui: remove debug printf
14 * libaltos: build with java src encoding UTF8
15 * altosui: construct Darwin application directory
16 * Add Mac OS X packaging bits
17 * altosui: Switch eeprom extension back to .eeprom
18 * Moved Mac OS packaging to altosui dir
19 * altosui: remove option to install to alternate volume
20 * Make altosui test script executable
22 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 13:30:19 -0600
24 altos (0.6+277+gd184819) unstable; urgency=low
27 * fix text since TM only has one led to blink
28 * add swig as a build dep
29 * add a jdk to the build deps
32 * When the EP0 IN buffer is full, don't panic, just skip sending
34 * Add libaltos which talks to USB connected altos devices
35 * Switch AltosUI to libaltos for device access
36 * Present list of altos devices in nice format
38 * Re-enable Linux support for altosui.
39 * Darwin doesn't have strndup.
40 * libaltos needs -I. on all systems
41 * libaltos: make clean remove all built files
42 * libaltos: build fat 10.5-compatible library
43 * Add Mac OS X packaging files for altosui
44 * Add application icons for Mac OS X
45 * Clean up altosui build a bit
46 * Remove directories as .class file dependencies; it makes them get
48 * Java clean ups -- use varargs where possible, remove
50 * Java voice reporting cleanups.
51 * Force java source encoding to UTF-8
52 * Make ao_log_data re-entrant as it is used for both sensor and GPS
54 * altosui: Catch errors opening USB devices. Limit list to relevant
56 * Make voice and channel menus work.
57 * Add voice test command for help in adjusting volume.
59 * altosui: Add eeprom data capture function. No UI yet.
60 * altosui: Add progress bar for eeprom downloading status
61 * altosui: Fix Save flight data monitor layout, add cancel
62 * altosui: Replace device dialog. Center eeprom monitor.
63 * altosui: report rocket ground bearing at landing only if known
64 * Reset GPS ready status when GPS comes unlocked on the pad
66 -- Bdale Garbee <bdale@gag.com> Thu, 29 Jul 2010 12:50:40 -0600
68 altos (0.6+236+gcd8aa79) unstable; urgency=low
71 * Telemetry code was mis-computing RSSI
72 * Switch DBG pins to GPIO when using any debug commands. Reboot to
76 * significant documentation update
77 * add build dep for sndfile
78 * reflect documentation file name change
79 * update to latest Debian standards version
81 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
83 altos (0.6+224+g4766b13) unstable; urgency=low
86 * documentation updates from Bob
89 * Extension to KML output format, and minor bug fix
92 * ao-view: disable radio telemetry monitoring during channel change
93 * Add special code for USB panic's.
94 * ao-postflight: was walking off state.data array
95 * Abort any in-progress radio operation when changing radio channel
97 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
99 altos (0.6+214+g16c4cae) unstable; urgency=low
102 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
103 * merge a derivative of Bob Finch's mere mortals guide as getting started
104 * merge the altusmetrum-themes package
107 * Fix telemetrum.inf, tested by Adrian and Keithp
108 * Finish basic flight monitoring UI with voice using FreeTTS
110 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
112 altos (0.6+204+g6bd8513) unstable; urgency=low
114 * lose the quotes since they apparently aren't necessary
116 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
118 altos (0.6+202+gae6854d) unstable; urgency=low
120 * update desktop file for conformance with current standards
122 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
124 altos (0.6+200+g68eaaa6) unstable; urgency=low
126 * add initial package build scripts for Arch Linux from Bob Finch
127 * add desktop file provided by Bob Finch
129 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
131 altos (0.6+195+gcde60f1) unstable; urgency=low
133 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
135 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
137 altos (0.6+193+g314d27a) unstable; urgency=low
140 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
142 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
144 altos (0.6+190+g8b6767e) unstable; urgency=low
147 * Fix all stdio reading functions to be __critical
148 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
150 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
152 altos (0.6+187+g8702f49) unstable; urgency=low
155 * more text created during SFO->DEN flight
156 * initial attempt at a telemetrum turn on script .. needs work
159 * Revert "Add optional 's' command to packet slave to enable/disable
161 * Disable interrupts while reading from stdin
163 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
165 altos (0.6+180+g99094f0) unstable; urgency=low
168 * Increase reset switch time to 100ms
169 * Add optional 's' command to packet slave to enable/disable slave
171 * More ALtosUI changes
172 * Autodetect flite voice registration function
175 * capture work done on SFO->DEN flight
176 * add some RF usage information from an email reply sent today, and
179 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
181 altos (0.6+171+g9394393) unstable; urgency=low
187 * Only have the slave return a packet if it received one.
189 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
191 altos (0.6+168+gc0ee1ae) unstable; urgency=low
194 * INSTALL file changed by auto tools
197 * libflite may forget to reference libasound
199 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
201 altos (0.6+164+g5c3b6e2) unstable; urgency=low
204 * Start adding java-based UI
205 * Add telemetry data parsing code
206 * Add Windows install .inf file
207 * Fix windows install file
208 * Add telem parsing code
209 * Steal C code from ao-view
210 * Display table of flight info. gps is not working yet though
211 * Fix up table formatting
214 * Clean up GPS data formatting
215 * Report current gps nsat, not last locked nsat
216 * Remove GPS data missing from skytraq. Save max height/accel/speed
217 * Remove unused cell renderer class
219 * Use RXTX for serial comm. Add logdir preference saving
220 * Make ao_radio_idle keep trying to get the radio to idle.
221 * Don't abort the radio when enabling telemetry monitoring
222 * Clean up some altosui comments
223 * Switch TeleMetrum from v0.2 to v1.0
224 * Add Linux device discovery
225 * Interrupt running replay thread when starting another replay
226 * serial port read function cannot be interrupted. poll every 1 second
227 * TD reports "not-connected" when GPS has 0 sats
228 * Tasks may move in task structure as a result of ao_exit
229 * Enable telemetry monitoring
230 * Use 16-bit flite voice (which appears to have changed symbols
232 * When changing RESET line, delay 20ms
235 * choose a better set of docbook xsl files
237 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
239 altos (0.6+131+g6629ec5) unstable; urgency=low
241 * lose the url entirely for now
243 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
245 altos (0.6+129+g934434f) unstable; urgency=low
249 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
251 altos (0.6+127+g05ad583) unstable; urgency=low
253 * need another build dep
255 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
257 altos (0.6+125+g8f1d47e) unstable; urgency=low
260 * tweak copyright assertion
261 * crudely incorporate "day in the life" info from web page
262 * rewrite urls in docbook format
264 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
266 altos (0.6+119+g00f49c8) unstable; urgency=low
269 * update changelogs for Debian build
270 * move gbp.conf into debian/
271 * initial harness for documentation
275 * Round radio calibration value instead of truncating
276 * Document the ao-dumplog '--remote' flag for radio-link downloads
278 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
280 altos (0.6+108+g6e61170) unstable; urgency=low
283 * Need to duplicate new altitude conversion code in aoview.
285 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
287 altos (0.6+106+ga1478f6) unstable; urgency=low
290 * Add ao_radio_xmit to help test boards without flashing them.
291 * Allow product names to have suffixes (like board revisions)
292 * Fix and document the ao-rawload --run flag
294 * Leave .ihx files in the build directory too - easier to debug that way
295 * Eliminate deadlock when writing config from radio link
296 * Fix up LED colors for each product.
297 * Add .gitignore for ao-bringup
300 * create a turn on script for lighting up TeleDongle v0.2 boards
302 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
304 altos (0.6+95+g2f45953) unstable; urgency=low
306 * update changelogs for Debian build
307 * conditionalize use of git on executability of /usr/bin/git binary
309 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
311 altos (0.6+88+gdeccc10) unstable; urgency=low
313 * add gawk as a build dependency since strtonum is a gawk extension
315 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
317 altos (0.6+86+g2491282) unstable; urgency=low
320 * Disable monitor mode before attempting radio test.
321 * Ensure that ao_alarm waits at least the specified time
322 * Remove dbg driver code from telemetrum/teledongle
323 * Add AT45DBxx1D driver
324 * Remove green LED and temp sensor from v0.2 code
325 * Add at45db161d.h header file for new flash part.
326 * Add 'f' command to display flash status register contents
327 * Dump more flash parameters for the flash_status command
328 * Dump config block from read/write config and flash_status commands
329 * Don't set ao_flash_setup_done until we're actually done.
330 * Remove flash debugging printfs
331 * Add simple gps dump command 'g'
332 * Force idle mode by shorting the SPI clock to ground at boot time.
333 * Switch to using internal cc1111 temperature sensor
334 * Missing ao_mutex_put in gps_dump
335 * Compute daytime using GPS as time base
336 * Pull in a bit more data for filtering the start of the boost
337 * Log GPS data on pad after boost detect.
338 * Change barometer conversion code to shrink conversion table
339 * Change altos build process to support per-product compile-time
341 * Update .gitignore files
343 * Add back stack size checking to altos linking phase
344 * Must install .map files for ao-load to work
346 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
348 altos (0.6+60+g10d1bbc) unstable; urgency=low
351 * Use ao_radio_get/ao_radio_put in packet code.
353 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
355 altos (0.6+58+gbbb152c) unstable; urgency=low
358 * Re-order config values. Change frequency to cal
359 * Allow radio calibration to be set from ao-load
360 * Add --cal to man page
362 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
364 altos (0.6+53+gcd49847) unstable; urgency=low
367 * Remove send_serial and serial_baud commands.
368 * Make ao_cmd_decimal produce both 32 and 16 bit values.
369 * Add radio calibration configuration.
371 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
373 altos (0.6+49+g9a1d7dd) unstable; urgency=low
376 * Change default callsign to "N0CALL"
378 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
380 altos (0.6+47+g4053309) unstable; urgency=low
382 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
383 * change home URL in control file to be the AltOS page
385 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
387 altos (0.6+43+gd6ba07e) unstable; urgency=low
390 * Decode HDOP data from skytraq GPS
391 * Document ao-postflight --gps and --kml options.
392 * Make ao-postflight create filenames using input filenames.
393 * Make TD print 0000-00-00 for invalid dates.
394 * Fix --plot arg handling. Add -all option.
395 * Convert telemetry file GPS satellite information in cc_log_read
396 * Don't crash if --plot isn't passed on ao-postflight command line
397 * ao-postflight: compute barometric alt for each GPS position
398 * ao-postflight: don't try to use missing gps sat data
399 * Automatically extract flight number for eeprom and telem filenames.
401 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
403 altos (0.6+32+g87e6f3e) unstable; urgency=low
406 * fix typo in comment
409 * Reduce igniter firing time from 500ms to 50ms.
410 * Add GPS date/time output to ao-postflight.
411 * Eliminate SiRF state values from ao-view.
413 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
415 altos (0.6+27+gb0d7e3f) unstable; urgency=low
418 * Add two-point accelerometer calibration.
419 * Remove "l" command as ao-dumplong no longer uses it
422 * Reformat ADC values to show all 16 bits
423 * ao_flight_test was using accel value for pressure too
424 * Pass accel calibration over telemetry stream. Telemetry data format
426 * Add ability to dump eeprom data over radio link.
427 * In packet master, move USB flush from packet thread to echo thread
428 * In USB pollchar, wait for packet before re-checking USB out len
429 * Explicitly use USB I/O routines in packet code
430 * Flush pending input when switching to remote packet mode
431 * Stop recording in ao-dumplog after receiving an invalid block
432 * Move ao_match_word from ao_ignite.c to ao_cmd.c
433 * Add Watchdog Timer Control register definitions
434 * Add reboot command.
435 * Return radio to telemetry settings when packet system closed.
436 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
437 * Loosen tolerances for main->landed transition
438 * Provide a dummy 'uninstall' target in the src directory.
439 * Share telemetry parsing code in cc library.
440 * Enable telemetry receive in ao_view
441 * Switch order of serial/flight in ao-postflight summary
442 * Add flight number to telemetry stream.
443 * Add date to GPS data, captured from GPRMC packet.
444 * Stop using SiRF state info.
446 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
448 altos (0.6) unstable; urgency=low
451 * Add support for the SkyTraq GPS unit
452 * Build two versions of TM, one for SiRF, one for SkyTraq
453 * Save some DSEG space by marking cmd functions __reentrant
454 * Add ao_wake_task and ao_exit
455 * Add keyhole-markup generation for ao-postflight.
456 * Initial packet bits. Just testing transmission
457 * Add radio carrier command
458 * Wait for TX to finish sending data
460 * Remove reason from ao_dma_abort
461 * Switch packet code from timer thread to ao_alarm
462 * Use ao_radio_done to wait for TX to completely finish with packet
463 * Send SYN packet to set sequence numbers
465 * Do more flushing in packet test code
466 * Use ao_alarm for ao_delay so it can be easily interrupted
467 * Poke master to speed up packet rate when things are busy
468 * No need to wakeup &ao_tick_count now
469 * Enable packet-based communcation to command processor
470 * Add more docs to the README file
471 * Disable interrupts while removing tasks from task list
472 * Add ao_usb_pollchar to ao.h
474 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
476 altos (0.5+90+g127c312) unstable; urgency=low
478 * de-version the libreadline-dev build dependency
480 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
482 altos (0.5+86+g2de548f) unstable; urgency=low
484 * automate push of updated and tagged master branch during
485 debian/rules prebuild
486 * flush repetitive junk out of debian/changelog, and update the
488 * add support for tagging git repository on each Debian package build
490 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
492 altos (0.5+77+gc57bd7f) unstable; urgency=low
494 * build for Debian from git
496 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600