1 altos (0.6+234+g8f19337) unstable; urgency=low
4 * Telemetry code was mis-computing RSSI
5 * Switch DBG pins to GPIO when using any debug commands. Reboot to
9 * significant documentation update
10 * add build dep for sndfile
11 * reflect documentation file name change
13 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:08:06 -0600
15 altos (0.6+224+g4766b13) unstable; urgency=low
18 * documentation updates from Bob
21 * Extension to KML output format, and minor bug fix
24 * ao-view: disable radio telemetry monitoring during channel change
25 * Add special code for USB panic's.
26 * ao-postflight: was walking off state.data array
27 * Abort any in-progress radio operation when changing radio channel
29 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
31 altos (0.6+214+g16c4cae) unstable; urgency=low
34 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
35 * merge a derivative of Bob Finch's mere mortals guide as getting started
36 * merge the altusmetrum-themes package
39 * Fix telemetrum.inf, tested by Adrian and Keithp
40 * Finish basic flight monitoring UI with voice using FreeTTS
42 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
44 altos (0.6+204+g6bd8513) unstable; urgency=low
46 * lose the quotes since they apparently aren't necessary
48 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
50 altos (0.6+202+gae6854d) unstable; urgency=low
52 * update desktop file for conformance with current standards
54 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
56 altos (0.6+200+g68eaaa6) unstable; urgency=low
58 * add initial package build scripts for Arch Linux from Bob Finch
59 * add desktop file provided by Bob Finch
61 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
63 altos (0.6+195+gcde60f1) unstable; urgency=low
65 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
67 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
69 altos (0.6+193+g314d27a) unstable; urgency=low
72 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
74 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
76 altos (0.6+190+g8b6767e) unstable; urgency=low
79 * Fix all stdio reading functions to be __critical
80 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
82 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
84 altos (0.6+187+g8702f49) unstable; urgency=low
87 * more text created during SFO->DEN flight
88 * initial attempt at a telemetrum turn on script .. needs work
91 * Revert "Add optional 's' command to packet slave to enable/disable
93 * Disable interrupts while reading from stdin
95 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
97 altos (0.6+180+g99094f0) unstable; urgency=low
100 * Increase reset switch time to 100ms
101 * Add optional 's' command to packet slave to enable/disable slave
103 * More ALtosUI changes
104 * Autodetect flite voice registration function
107 * capture work done on SFO->DEN flight
108 * add some RF usage information from an email reply sent today, and
111 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
113 altos (0.6+171+g9394393) unstable; urgency=low
119 * Only have the slave return a packet if it received one.
121 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
123 altos (0.6+168+gc0ee1ae) unstable; urgency=low
126 * INSTALL file changed by auto tools
129 * libflite may forget to reference libasound
131 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
133 altos (0.6+164+g5c3b6e2) unstable; urgency=low
136 * Start adding java-based UI
137 * Add telemetry data parsing code
138 * Add Windows install .inf file
139 * Fix windows install file
140 * Add telem parsing code
141 * Steal C code from ao-view
142 * Display table of flight info. gps is not working yet though
143 * Fix up table formatting
146 * Clean up GPS data formatting
147 * Report current gps nsat, not last locked nsat
148 * Remove GPS data missing from skytraq. Save max height/accel/speed
149 * Remove unused cell renderer class
151 * Use RXTX for serial comm. Add logdir preference saving
152 * Make ao_radio_idle keep trying to get the radio to idle.
153 * Don't abort the radio when enabling telemetry monitoring
154 * Clean up some altosui comments
155 * Switch TeleMetrum from v0.2 to v1.0
156 * Add Linux device discovery
157 * Interrupt running replay thread when starting another replay
158 * serial port read function cannot be interrupted. poll every 1 second
159 * TD reports "not-connected" when GPS has 0 sats
160 * Tasks may move in task structure as a result of ao_exit
161 * Enable telemetry monitoring
162 * Use 16-bit flite voice (which appears to have changed symbols
164 * When changing RESET line, delay 20ms
167 * choose a better set of docbook xsl files
169 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
171 altos (0.6+131+g6629ec5) unstable; urgency=low
173 * lose the url entirely for now
175 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
177 altos (0.6+129+g934434f) unstable; urgency=low
181 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
183 altos (0.6+127+g05ad583) unstable; urgency=low
185 * need another build dep
187 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
189 altos (0.6+125+g8f1d47e) unstable; urgency=low
192 * tweak copyright assertion
193 * crudely incorporate "day in the life" info from web page
194 * rewrite urls in docbook format
196 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
198 altos (0.6+119+g00f49c8) unstable; urgency=low
201 * update changelogs for Debian build
202 * move gbp.conf into debian/
203 * initial harness for documentation
207 * Round radio calibration value instead of truncating
208 * Document the ao-dumplog '--remote' flag for radio-link downloads
210 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
212 altos (0.6+108+g6e61170) unstable; urgency=low
215 * Need to duplicate new altitude conversion code in aoview.
217 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
219 altos (0.6+106+ga1478f6) unstable; urgency=low
222 * Add ao_radio_xmit to help test boards without flashing them.
223 * Allow product names to have suffixes (like board revisions)
224 * Fix and document the ao-rawload --run flag
226 * Leave .ihx files in the build directory too - easier to debug that way
227 * Eliminate deadlock when writing config from radio link
228 * Fix up LED colors for each product.
229 * Add .gitignore for ao-bringup
232 * create a turn on script for lighting up TeleDongle v0.2 boards
234 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
236 altos (0.6+95+g2f45953) unstable; urgency=low
238 * update changelogs for Debian build
239 * conditionalize use of git on executability of /usr/bin/git binary
241 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
243 altos (0.6+88+gdeccc10) unstable; urgency=low
245 * add gawk as a build dependency since strtonum is a gawk extension
247 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
249 altos (0.6+86+g2491282) unstable; urgency=low
252 * Disable monitor mode before attempting radio test.
253 * Ensure that ao_alarm waits at least the specified time
254 * Remove dbg driver code from telemetrum/teledongle
255 * Add AT45DBxx1D driver
256 * Remove green LED and temp sensor from v0.2 code
257 * Add at45db161d.h header file for new flash part.
258 * Add 'f' command to display flash status register contents
259 * Dump more flash parameters for the flash_status command
260 * Dump config block from read/write config and flash_status commands
261 * Don't set ao_flash_setup_done until we're actually done.
262 * Remove flash debugging printfs
263 * Add simple gps dump command 'g'
264 * Force idle mode by shorting the SPI clock to ground at boot time.
265 * Switch to using internal cc1111 temperature sensor
266 * Missing ao_mutex_put in gps_dump
267 * Compute daytime using GPS as time base
268 * Pull in a bit more data for filtering the start of the boost
269 * Log GPS data on pad after boost detect.
270 * Change barometer conversion code to shrink conversion table
271 * Change altos build process to support per-product compile-time
273 * Update .gitignore files
275 * Add back stack size checking to altos linking phase
276 * Must install .map files for ao-load to work
278 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
280 altos (0.6+60+g10d1bbc) unstable; urgency=low
283 * Use ao_radio_get/ao_radio_put in packet code.
285 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
287 altos (0.6+58+gbbb152c) unstable; urgency=low
290 * Re-order config values. Change frequency to cal
291 * Allow radio calibration to be set from ao-load
292 * Add --cal to man page
294 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
296 altos (0.6+53+gcd49847) unstable; urgency=low
299 * Remove send_serial and serial_baud commands.
300 * Make ao_cmd_decimal produce both 32 and 16 bit values.
301 * Add radio calibration configuration.
303 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
305 altos (0.6+49+g9a1d7dd) unstable; urgency=low
308 * Change default callsign to "N0CALL"
310 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
312 altos (0.6+47+g4053309) unstable; urgency=low
314 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
315 * change home URL in control file to be the AltOS page
317 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
319 altos (0.6+43+gd6ba07e) unstable; urgency=low
322 * Decode HDOP data from skytraq GPS
323 * Document ao-postflight --gps and --kml options.
324 * Make ao-postflight create filenames using input filenames.
325 * Make TD print 0000-00-00 for invalid dates.
326 * Fix --plot arg handling. Add -all option.
327 * Convert telemetry file GPS satellite information in cc_log_read
328 * Don't crash if --plot isn't passed on ao-postflight command line
329 * ao-postflight: compute barometric alt for each GPS position
330 * ao-postflight: don't try to use missing gps sat data
331 * Automatically extract flight number for eeprom and telem filenames.
333 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
335 altos (0.6+32+g87e6f3e) unstable; urgency=low
338 * fix typo in comment
341 * Reduce igniter firing time from 500ms to 50ms.
342 * Add GPS date/time output to ao-postflight.
343 * Eliminate SiRF state values from ao-view.
345 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
347 altos (0.6+27+gb0d7e3f) unstable; urgency=low
350 * Add two-point accelerometer calibration.
351 * Remove "l" command as ao-dumplong no longer uses it
354 * Reformat ADC values to show all 16 bits
355 * ao_flight_test was using accel value for pressure too
356 * Pass accel calibration over telemetry stream. Telemetry data format
358 * Add ability to dump eeprom data over radio link.
359 * In packet master, move USB flush from packet thread to echo thread
360 * In USB pollchar, wait for packet before re-checking USB out len
361 * Explicitly use USB I/O routines in packet code
362 * Flush pending input when switching to remote packet mode
363 * Stop recording in ao-dumplog after receiving an invalid block
364 * Move ao_match_word from ao_ignite.c to ao_cmd.c
365 * Add Watchdog Timer Control register definitions
366 * Add reboot command.
367 * Return radio to telemetry settings when packet system closed.
368 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
369 * Loosen tolerances for main->landed transition
370 * Provide a dummy 'uninstall' target in the src directory.
371 * Share telemetry parsing code in cc library.
372 * Enable telemetry receive in ao_view
373 * Switch order of serial/flight in ao-postflight summary
374 * Add flight number to telemetry stream.
375 * Add date to GPS data, captured from GPRMC packet.
376 * Stop using SiRF state info.
378 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
380 altos (0.6) unstable; urgency=low
383 * Add support for the SkyTraq GPS unit
384 * Build two versions of TM, one for SiRF, one for SkyTraq
385 * Save some DSEG space by marking cmd functions __reentrant
386 * Add ao_wake_task and ao_exit
387 * Add keyhole-markup generation for ao-postflight.
388 * Initial packet bits. Just testing transmission
389 * Add radio carrier command
390 * Wait for TX to finish sending data
392 * Remove reason from ao_dma_abort
393 * Switch packet code from timer thread to ao_alarm
394 * Use ao_radio_done to wait for TX to completely finish with packet
395 * Send SYN packet to set sequence numbers
397 * Do more flushing in packet test code
398 * Use ao_alarm for ao_delay so it can be easily interrupted
399 * Poke master to speed up packet rate when things are busy
400 * No need to wakeup &ao_tick_count now
401 * Enable packet-based communcation to command processor
402 * Add more docs to the README file
403 * Disable interrupts while removing tasks from task list
404 * Add ao_usb_pollchar to ao.h
406 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
408 altos (0.5+90+g127c312) unstable; urgency=low
410 * de-version the libreadline-dev build dependency
412 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
414 altos (0.5+86+g2de548f) unstable; urgency=low
416 * automate push of updated and tagged master branch during
417 debian/rules prebuild
418 * flush repetitive junk out of debian/changelog, and update the
420 * add support for tagging git repository on each Debian package build
422 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
424 altos (0.5+77+gc57bd7f) unstable; urgency=low
426 * build for Debian from git
428 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600