#   File : uap.conf


ap_config={
    SSID="Marvell Micro AP"         # SSID of Micro AP
    BeaconPeriod=100                # Beacon period in TU
    Channel=6                       # Radio Channel	6
#   Channel=0,1                     # auto channel select (MCS mode)
    ChanList=1,6,11                 # Scan channel list 
#   AP_MAC=00:34:22:77:46:41        # MAC address of AP
    RxAntenna=0                     # 0 for Antenna A
                                    # 1 for Antenna B
    TxAntenna=0                     # 0 for Antenna A 
                                    # 1 for Antenna B
    Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c  
                                    # Set of data rate that a station
                                    # in the BSS may use
                                    # (in unit of 500 kilobit/s)
    TxPowerLevel=13                 # Transmit power level in dBm
    BroadcastSSID=1                 # Broadcast SSID feature
                                    # 1: Enable  0:Disable
    RTSThreshold=2347               # RTS threshold value
    FragThreshold=2346              # Fragmentation threshold value
    DTIMPeriod=1                    # DTIM period in beacon periods 
    RadioControl=1                  # 0: radio on  1: radio off
    MCBCdataRate=0                  # MCBC rate to use for packet transmission
                                    # 0:auto
                                    # >0 fix rate (in unit of 500 kilobit/s) 	 
    TxDataRate=0                    # Data rate to use for packet transmission
                                    # 0:auto
                                    # >0 fix rate (in unit of 500 kilobit/s) 	 
    PktFwdCtl=1                     # Packet forwarding control
                                    # 0: forward all packets to the host
                                    # 1: firmware handles intr-BSS packets
    StaAgeoutTimer=1800             # Inactive client station age out timer value
                                    # in units of 100ms
    MaxStaNum=8                     # Max number of stations allowed to connect	
    Retrylimit=7                    # Retry limit to use for packet transmissions
    AuthMode=0                      # 0:Open authentication
                                    # 1:shared key authentication
                                    # 2: Static WEP
    Protocol=1                      # protocol to use
                                    # 1: No security  	2: Static WEP
                                    # 8: WPA	32: WPA2    40:WPA2 Mixed Mode
    RSNReplayProtection=0           # RSN replay protection 0: disabled, 1: enabled

# **** WEP security setting******
#   KeyIndex=0                      # Index of WEP key to use (0 to 3)
#   Sample Key configurations are 
#       Key_0="55555"			
#       Key_1=1234567890
#       Key_2="1234567890123"
#       Key_3=12345678901234567890123456


# **** WPA/WPA2 PSK setting******
    
#    PairwiseCipher=4               # Pairwise cipher type
                                    # 0: None
                                    # 4: TKIP	  8: AES CCMP
                                    # 12: AES CCMP + TKIP
#    GroupCipher=4                  # group cipher type
                                    # 0: None
                                    # 4: TKIP	  8: AES CCMP
#    PSK="1234567890"               # WPA/WPA2 passphrase 	
     GroupRekeyTime= 86400          # Group key re-key interval, in second.
                                    # 0 mean never re-key
                                    #802.11D specific configuration
    11d_enable=0                    # 0-disable 1-enable
#   country=US                      # country information
}



ap_mac_filter={
    FilterMode=0                    # Mode of filter table
                                    # 0: filter table is disabled
                                    # 1: allow MAC address in the filter table to associate
                                    # 2: block MAC address in the filter table       
    Count=0                         # Number of entries in filter table,up to 16
#Sample mac settings are 
#    mac_1=00:50:23:45:76:22         # mac address
#    mac_2=00:34:22:77:46:34         # mac address   	
}

#custom_ie_config={
#    MgmtSubtypeMask_0=0x1
#    IEBuffer_0=0x6403736976
#    MgmtSubtypeMask_1=0x2
#    IEBuffer_1=0x650473697661
#    MgmtSubtypeMask_2=0x4
#    IEBuffer_2=0x6606736976617273
#    MgmtSubtypeMask_3=0x8
#    IEBuffer_3=0x6606736976617573
#}