% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2011-02-24.09}
+\def\texinfoversion{2013-06-23.10}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
%
% As a special exception, when this file is read by TeX when processing
% a Texinfo source document, you may use the result without
-% restriction. (This has been our intent since Texinfo was invented.)
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
%
% Please try the latest version of texinfo.tex before submitting bug
% reports; you can get the latest version from:
-% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org).
+% http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+% http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+% http://www.gnu.org/software/texinfo/ (the Texinfo home page)
% The texinfo.tex in any given distribution could well be out
% of date, so if that's what you're using, please check.
%
% Set up fixed words for English if not already set.
\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined \gdef\putworderror{error}\fi
\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
\ifx\putwordin\undefined \gdef\putwordin{in}\fi
\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
\errorcontextlines16
}%
+% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+%
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
% add check for \lastpenalty to plain's definitions. If the last thing
% we did was a \nobreak, we don't want to insert more space.
%
\def\:{\spacefactor=1000 }
% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
% @/ allows a line break.
\let\/=\allowbreak
\newdimen\mil \mil=0.001in
-% Old definition--didn't work.
-%\parseargdef\need{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
\parseargdef\need{%
% Ensure vertical mode, so we don't make a big box in the middle of a
% paragraph.
\def\popthisfilestack{\errthisfilestackempty}
\def\errthisfilestackempty{\errmessage{Internal error:
the stack of filenames is empty.}}
-
+%
\def\thisfile{}
% @center line
%
\parseargdef\center{%
\ifhmode
- \let\next\centerH
+ \let\centersub\centerH
\else
- \let\next\centerV
+ \let\centersub\centerV
\fi
- \next{\hfil \ignorespaces#1\unskip \hfil}%
+ \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+ \let\centersub\relax % don't let the definition persist, just in case
}
-\def\centerH#1{%
- {%
- \hfil\break
- \advance\hsize by -\leftskip
- \advance\hsize by -\rightskip
- \line{#1}%
- \break
- }%
+\def\centerH#1{{%
+ \hfil\break
+ \advance\hsize by -\leftskip
+ \advance\hsize by -\rightskip
+ \line{#1}%
+ \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+ % The idea here is the same as in \startdefun, \cartouche, etc.: if
+ % @center is the first thing after a section heading, we need to wipe
+ % out the negative parskip inserted by \sectionheading, but still
+ % prevent a page break here.
+ \centerpenalty = \lastpenalty
+ \ifnum\centerpenalty>10000 \vskip\parskip \fi
+ \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+ \line{\kern\leftskip #1\kern\rightskip}%
}
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
% @sp n outputs n lines of vertical space
-
+%
\parseargdef\sp{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
% @ignore ... @end ignore is another way to write a comment
-
+%
\def\comment{\begingroup \catcode`\^^M=\other%
\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
\commentxxx}
{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
+%
\let\c=\comment
% @paragraphindent NCHARS
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
-% (and related messages, the final outcome is that it is up to the TeX
-% user to double the backslashes and otherwise make the string valid, so
-% that's what we do).
-
-% double active backslashes.
-%
-{\catcode`\@=0 \catcode`\\=\active
- @gdef@activebackslashdouble{%
- @catcode`@\=@active
- @let\=@doublebackslash}
-}
-
-% To handle parens, we must adopt a different approach, since parens are
-% not active characters. hyperref.dtx (which has the same problem as
-% us) handles it with this amazing macro to replace tokens, with minor
-% changes for Texinfo. It is included here under the GPL by permission
-% from the author, Heiko Oberdiek.
-%
-% #1 is the tokens to replace.
-% #2 is the replacement.
-% #3 is the control sequence with the string.
-%
-\def\HyPsdSubst#1#2#3{%
- \def\HyPsdReplace##1#1##2\END{%
- ##1%
- \ifx\\##2\\%
- \else
- #2%
- \HyReturnAfterFi{%
- \HyPsdReplace##2\END
- }%
- \fi
- }%
- \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
-}
-\long\def\HyReturnAfterFi#1\fi{\fi#1}
-
-% #1 is a control sequence in which to do the replacements.
-\def\backslashparens#1{%
- \xdef#1{#1}% redefine it as its expansion; the definition is simply
- % \lastnode when called from \setref -> \pdfmkdest.
- \HyPsdSubst{(}{\realbackslash(}{#1}%
- \HyPsdSubst{)}{\realbackslash)}{#1}%
+%
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages. The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do. pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
+
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+ \ifx\pdfescapestring\thisisundefined
+ % No primitive available; should we give a warning or log?
+ % Many times it won't matter.
+ \else
+ % The expandable \pdfescapestring primitive escapes parentheses,
+ % backslashes, and other special chars.
+ \xdef#1{\pdfescapestring{#1}}%
+ \fi
}
\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
%
% #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
\def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
- \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+ \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+ \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
%
- % pdftex (and the PDF format) support .png, .jpg, .pdf (among
- % others). Let's try in that order.
+ % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+ % others). Let's try in that order, PDF first since if
+ % someone has a scalable image, presumably better to use that than a
+ % bitmap.
\let\pdfimgext=\empty
\begingroup
- \openin 1 #1.png \ifeof 1
- \openin 1 #1.jpg \ifeof 1
- \openin 1 #1.jpeg \ifeof 1
- \openin 1 #1.JPG \ifeof 1
- \openin 1 #1.pdf \ifeof 1
- \openin 1 #1.PDF \ifeof 1
+ \openin 1 #1.pdf \ifeof 1
+ \openin 1 #1.PDF \ifeof 1
+ \openin 1 #1.png \ifeof 1
+ \openin 1 #1.jpg \ifeof 1
+ \openin 1 #1.jpeg \ifeof 1
+ \openin 1 #1.JPG \ifeof 1
\errhelp = \nopdfimagehelp
\errmessage{Could not find image file #1 for pdf}%
- \else \gdef\pdfimgext{PDF}%
+ \else \gdef\pdfimgext{JPG}%
\fi
- \else \gdef\pdfimgext{pdf}%
+ \else \gdef\pdfimgext{jpeg}%
\fi
- \else \gdef\pdfimgext{JPG}%
+ \else \gdef\pdfimgext{jpg}%
\fi
- \else \gdef\pdfimgext{jpeg}%
+ \else \gdef\pdfimgext{png}%
\fi
- \else \gdef\pdfimgext{jpg}%
+ \else \gdef\pdfimgext{PDF}%
\fi
- \else \gdef\pdfimgext{png}%
+ \else \gdef\pdfimgext{pdf}%
\fi
\closein 1
\endgroup
\else
\immediate\pdfximage
\fi
- \ifdim \wd0 >0pt width \imagewidth \fi
- \ifdim \wd2 >0pt height \imageheight \fi
+ \ifdim \wd0 >0pt width \pdfimagewidth \fi
+ \ifdim \wd2 >0pt height \pdfimageheight \fi
\ifnum\pdftexversion<13
#1.\pdfimgext
\else
% such as \, aren't expanded when present in a section title.
\indexnofonts
\turnoffactive
- \activebackslashdouble
\makevalueexpandable
\def\pdfdestname{#1}%
- \backslashparens\pdfdestname
+ \txiescapepdf\pdfdestname
\safewhatsit{\pdfdest name{\pdfdestname} xyz}%
}}
%
% page number. We could generate a destination for the section
% text in the case where a section has no node, but it doesn't
% seem worth the trouble, since most documents are normally structured.
- \def\pdfoutlinedest{#3}%
+ \edef\pdfoutlinedest{#3}%
\ifx\pdfoutlinedest\empty
\def\pdfoutlinedest{#4}%
\else
- % Doubled backslashes in the name.
- {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
- \backslashparens\pdfoutlinedest}%
+ \txiescapepdf\pdfoutlinedest
\fi
%
- % Also double the backslashes in the display string.
- {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
- \backslashparens\pdfoutlinetext}%
+ % Also escape PDF chars in the display string.
+ \edef\pdfoutlinetext{#1}%
+ \txiescapepdf\pdfoutlinetext
%
\pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
}
%
\def\pdfmakeoutlines{%
\begingroup
- % Thanh's hack / proper braces in bookmarks
- \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
- \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
- %
% Read toc silently, to get counts of subentries for \pdfoutline.
\def\partentry##1##2##3##4{}% ignore parts in the outlines
\def\numchapentry##1##2##3##4{%
% Latin 2 (0xea) gets translated to a | character. Info from
% Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
%
- % xx to do this right, we have to translate 8-bit characters to
- % their "best" equivalent, based on the @documentencoding. Right
- % now, I guess we'll just let the pdf reader have its way.
+ % TODO this right, we have to translate 8-bit characters to
+ % their "best" equivalent, based on the @documentencoding. Too
+ % much work for too little return. Just use the ASCII equivalents
+ % we use for the index sort strings.
+ %
\indexnofonts
\setupdatafile
+ % We can have normal brace characters in the PDF outlines, unlike
+ % Texinfo index files. So set that up.
+ \def\{{\lbracecharliteral}%
+ \def\}{\rbracecharliteral}%
\catcode`\\=\active \otherbackslash
\input \tocreadfilename
\endgroup
}
+ {\catcode`[=1 \catcode`]=2
+ \catcode`{=\other \catcode`}=\other
+ \gdef\lbracecharliteral[{]%
+ \gdef\rbracecharliteral[}]%
+ ]
%
\def\skipspaces#1{\def\PP{#1}\def\D{|}%
\ifx\PP\D\let\nextsp\relax
\else\let\nextsp\skipspaces
- \ifx\p\space\else\addtokens{\filename}{\PP}%
- \advance\filenamelength by 1
- \fi
+ \addtokens{\filename}{\PP}%
+ \advance\filenamelength by 1
\fi
\nextsp}
- \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+ \def\getfilename#1{%
+ \filenamelength=0
+ % If we don't expand the argument now, \skipspaces will get
+ % snagged on things like "@value{foo}".
+ \edef\temp{#1}%
+ \expandafter\skipspaces\temp|\relax
+ }
\ifnum\pdftexversion < 14
\let \startlink \pdfannotlink
\else
\def\ttsl{\setfontstyle{ttsl}}
-% Default leading.
-\newdimen\textleading \textleading = 13.2pt
-
% Set the baselineskip to #1, and the lineskip and strut size
% correspondingly. There is no deep meaning behind these magic numbers
% used as factors; they just match (closely enough) what Knuth defined.
% can get a sort of poor man's double spacing by redefining this.
\def\baselinefactor{1}
%
+\newdimen\textleading
\def\setleading#1{%
\dimen0 = #1\relax
\normalbaselineskip = \baselinefactor\dimen0
\fi\fi
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
+% Set the font macro #1 to the font named \fontprefix#2.
% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
-% empty to omit).
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
\def\setfont#1#2#3#4#5{%
\font#1=\fontprefix#2#3 scaled #4
\csname cmap#5\endcsname#1%
}
% This is what gets called when #5 of \setfont is empty.
\let\cmap\gobble
-% emacs-page end of cmaps
+%
+% (end of cmaps)
% Use cm as the default font prefix.
% To specify the font prefix, you must define \fontprefix
\fi
% Support font families that don't use the same naming scheme as CM.
\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
+\def\rmbshape{bx} % where the normal face is bold
\def\bfshape{b}
\def\bxshape{bx}
\def\ttshape{tt}
\def\scshape{csc}
\def\scbshape{csc}
-% Definitions for a main text size of 11pt. This is the default in
-% Texinfo.
+% Definitions for a main text size of 11pt. (The default in Texinfo.)
%
\def\definetextfontsizexi{%
% Text fonts (11.2pt, magstep1).
\textleading = 13.2pt % line spacing for 11pt CM
\textfonts % reset the current fonts
\rm
-} % end of 11pt text font size definitions
+} % end of 11pt text font size definitions, \definetextfontsizexi
% Definitions to make the main text be 10pt Computer Modern, with
\textleading = 12pt % line spacing for 10pt CM
\textfonts % reset the current fonts
\rm
-} % end of 10pt text font size definitions
+} % end of 10pt text font size definitions, \definetextfontsizex
% We provide the user-level command
\gdef\markupsetcodequoteleft{\let`\codequoteleft}
\gdef\markupsetcodequoteright{\let'\codequoteright}
-
-\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
}
\let\markupsetuplqcode \markupsetcodequoteleft
\let\markupsetuplqexample \markupsetcodequoteleft
\let\markupsetuprqexample \markupsetcodequoteright
%
+\let\markupsetuplqkbd \markupsetcodequoteleft
+\let\markupsetuprqkbd \markupsetcodequoteright
+%
\let\markupsetuplqsamp \markupsetcodequoteleft
\let\markupsetuprqsamp \markupsetcodequoteright
%
\let\markupsetuplqverbatim \markupsetcodequoteleft
\let\markupsetuprqverbatim \markupsetcodequoteright
-\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
-
% Allow an option to not use regular directed right quote/apostrophe
% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
% The undirected quote is ugly, so don't make it the default, but it
\else\ifx\next-%
\else\ifx\next.%
\else\ptexslash
- \fi\fi\fi}
+ \fi\fi\fi
+ \aftersmartic
+}
-% like \smartslanted except unconditionally uses \ttsl, and no ic.
-% @var is set to this for defun arguments.
+% Unconditional use \ttsl, and no ic. @var is set to this for defuns.
\def\ttslanted#1{{\ttsl #1}}
% @cite is like \smartslanted except unconditionally use \sl. We never want
% ttsl for book titles, do we?
\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+\def\aftersmartic{}
+\def\var#1{%
+ \let\saveaftersmartic = \aftersmartic
+ \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+ \smartslanted{#1}%
+}
+
\let\i=\smartitalic
\let\slanted=\smartslanted
-\def\var#1{\smartslanted{#1}}
\let\dfn=\smartslanted
\let\emph=\smartitalic
% @samp.
\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
-% definition of @key that produces a lozenge. Doesn't adjust to text size.
-%\setfont\keyrm\rmshape{8}{1000}{OT1}
-%\font\keysy=cmsy9
-%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-% \vbox{\hrule\kern-0.4pt
-% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-% \kern-0.4pt\hrule}%
-% \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
-% definition of @key with no lozenge. If the current font is already
-% monospace, don't change it; that way, we respect @kbdinputstyle. But
-% if it isn't monospace, then use \tt.
-%
-\def\key#1{{\setupmarkupstyle{key}%
- \nohyphenation
- \ifmonospace\else\tt\fi
- #1}\null}
-
-% ctrl is no longer a Texinfo command.
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
\def\tclose#1{%
{%
% Change normal interword space to be same as for the current font.
\plainfrenchspacing
#1%
}%
- \null
+ \null % reset spacefactor to 1000
}
% We *must* turn on hyphenation at `-' and `_' in @code.
+% (But see \codedashfinish below.)
% Otherwise, it is too hard to avoid overfull hboxes
% in the Emacs manual, the Library manual, etc.
-
+%
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
% both hyphenation at - and hyphenation within words.
% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
+% and arrange explicitly to hyphenate at a dash. -- rms.
{
\catcode`\-=\active \catcode`\_=\active
\catcode`\'=\active \catcode`\`=\active
\let-\codedash
\let_\codeunder
\else
- \let-\realdash
+ \let-\normaldash
\let_\realunder
\fi
+ % Given -foo (with a single dash), we do not want to allow a break
+ % after the hyphen.
+ \global\let\codedashprev=\codedash
+ %
\codex
}
+ %
+ \gdef\codedash{\futurelet\next\codedashfinish}
+ \gdef\codedashfinish{%
+ \normaldash % always output the dash character itself.
+ %
+ % Now, output a discretionary to allow a line break, unless
+ % (a) the next character is a -, or
+ % (b) the preceding character is a -.
+ % E.g., given --posix, we do not want to allow a break after either -.
+ % Given --foo-bar, we do want to allow a break between the - and the b.
+ \ifx\next\codedash \else
+ \ifx\codedashprev\codedash
+ \else \discretionary{}{}{}\fi
+ \fi
+ \global\let\codedashprev=\next
+ }
}
-
+\def\normaldash{-}
+%
\def\codex #1{\tclose{#1}\endgroup}
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
\def\codeunder{%
% this is all so @math{@code{var_name}+1} can work. In math mode, _
% is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
}
% An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__. This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general. @allowcodebreaks provides a way to control this.
+% each of the four underscores in __typeof__. This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
%
\newif\ifallowcodebreaks \allowcodebreakstrue
\fi\fi
}
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
+\let\command=\code
+\let\env=\code
+\let\file=\code
+\let\option=\code
+
% @uref (abbreviation for `urlref') takes an optional (comma-separated)
% second argument specifying the text to display and an optional third
% arg as text to display instead of (rather than in addition to) the url
\let\email=\uref
\fi
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
-
% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
% `example' (@kbd uses ttsl only inside of @example and friends),
% or `code' (@kbd uses normal tty font always).
% Default is `distinct'.
\kbdinputstyle distinct
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
+\def\kbdsub#1#2#3\par{%
+ \def\one{#1}\def\three{#3}\def\threex{??}%
+ \ifx\one\xkey\ifx\threex\three \key{#2}%
+ \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+ \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
-\let\command=\code
+% definition of @key that produces a lozenge. Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+% \vbox{\hrule\kern-0.4pt
+% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+% \kern-0.4pt\hrule}%
+% \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge. If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle. But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+ \nohyphenation
+ \ifmonospace\else\tt\fi
+ #1}\null}
% @clicksequence{File @click{} Open ...}
\def\clicksequence#1{\begingroup #1\endgroup}
\ifx\temp\empty \else
\space ({\unsepspaces \ignorespaces \temp \unskip})%
\fi
+ \null % reset \spacefactor=1000
}
% @abbr for "Comput. J." and the like.
\ifx\temp\empty \else
\space ({\unsepspaces \ignorespaces \temp \unskip})%
\fi
+ \null % reset \spacefactor=1000
}
% @asis just yields its argument. Used with @table, for example.
}
}
+% ctrl is no longer a Texinfo command, but leave this definition for fun.
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+%
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+ \def\inlinefmtname{#1}%
+ \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely. Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored. But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too. We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+%
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+ \def\inlinerawname{#1}%
+ \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+ \endgroup % close group opened by \tex.
+}
+
\message{glyphs,}
% and logos.
-% @@ prints an @.
+% @@ prints an @, as does @atchar{}.
\def\@{\char64 }
+\let\atchar=\@
-% Used to generate quoted braces. Unless we're in typewriter, use
-% \ecfont because the CM text fonts do not have braces, and we don't
-% want to switch into math.
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+% Unless we're in typewriter, use \ecfont because the CM text fonts do
+% not have braces, and we don't want to switch into math.
\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
+\let\{=\mylbrace \let\lbracechar=\{
+\let\}=\myrbrace \let\rbracechar=\}
\begingroup
% Definitions to produce \{ and \} commands for indices,
% and @{ and @} for the aux/toc files.
{\tentt \global\dimen0 = 3em}% Width of the box.
\dimen2 = .55pt % Thickness of rules
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
%
\setbox\errorbox=\hbox to \dimen0{\hfil
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
% hopefully nobody will notice/care.
\edef\ecsize{\csname\curfontsize ecsize\endcsname}%
\edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+ \ifmonospace
+ % typewriter:
+ \font\thisecfont = ectt\ecsize \space at \nominalsize
\else
- % regular:
- \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+ \ifx\curfontstyle\bfstylename
+ % bold:
+ \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+ \else
+ % regular:
+ \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+ \fi
\fi
\thisecfont
}
\finishedtitlepagetrue
}
-%%% Macros to be used within @titlepage:
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right. This should be used
+% inside a \vbox, and fonts need to be set appropriately first. Because
+% it is always used for titles, nothing else, we call \rmisbold. \par
+% should be specified before the end of the \vbox, since a vbox is a group.
+%
+\def\raggedtitlesettings{%
+ \rmisbold
+ \hyphenpenalty=10000
+ \parindent=0pt
+ \tolerance=5000
+ \ptexraggedright
+}
+
+% Macros to be used within @titlepage:
\let\subtitlerm=\tenrm
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
\parseargdef\title{%
\checkenv\titlepage
- \leftline{\titlefonts\rmisbold #1}
+ \vbox{\titlefonts \raggedtitlesettings #1\par}%
% print a rule at the page bottom also.
\finishedtitlepagefalse
\vskip4pt \hrule height 4pt width \hsize \vskip4pt
}
-%%% Set up page headings and footings.
+% Set up page headings and footings.
\let\thispage=\folio
\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
\global\advance\multitablelinespace by-\ht0
\fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+% If so, set to same dimension as multitablelinespace.
\ifdim\multitableparskip>\multitablelinespace
\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+ % than skip between lines in the table.
\fi%
\ifdim\multitableparskip=0pt
\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+ % than skip between lines in the table.
\fi}
% ..., but we might end up with active ones in the argument if
% we're called from @code, as @code{@value{foo-bar_}}, though.
% So \let them to their normal equivalents.
- \let-\realdash \let_\normalunderscore
+ \let-\normaldash \let_\normalunderscore
}
}
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
-% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+% To get the special treatment we need for `@end ifset,' we call
+% \makecond and then redefine.
%
\makecond{ifset}
\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
}
\def\ifsetfail{\doignore{ifset}}
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
% defined with @set, or has been undefined with @clear.
%
% The `\else' inside the `\doifset' parameter is a trick to reuse the
\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
\def\ifclearfail{\doignore{ifclear}}
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined. We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+%
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+ \makevalueexpandable
+ \let\next=\empty
+ \expandafter\ifx\csname #2\endcsname\relax
+ #1% If not defined, \let\next as above.
+ \fi
+ \expandafter
+ }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+ \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
% @dircategory CATEGORY -- specify a category of the dir file
% which this file should belong to. Ignore this in TeX.
\let\dircategory=\comment
\definedummyword\guillemetright
\definedummyword\guilsinglleft
\definedummyword\guilsinglright
+ \definedummyword\lbracechar
\definedummyword\leq
\definedummyword\minus
\definedummyword\ogonek
\definedummyword\quoteleft
\definedummyword\quoteright
\definedummyword\quotesinglbase
+ \definedummyword\rbracechar
\definedummyword\result
\definedummyword\textdegree
%
\definedummyword\t
%
% Commands that take arguments.
+ \definedummyword\abbr
\definedummyword\acronym
+ \definedummyword\anchor
\definedummyword\cite
\definedummyword\code
\definedummyword\command
\definedummyword\emph
\definedummyword\env
\definedummyword\file
+ \definedummyword\image
\definedummyword\indicateurl
+ \definedummyword\inforef
\definedummyword\kbd
\definedummyword\key
\definedummyword\math
% content at all. So for index sorting, we map @{ and @} to strings
% starting with |, since that ASCII character is between ASCII { and }.
\def\{{|a}%
+ \def\lbracechar{|a}%
+ %
\def\}{|b}%
+ \def\rbracechar{|b}%
%
% Non-English letters.
\def\AA{AA}%
%
% ..., ready, GO:
%
-\def\safewhatsit#1{%
-\ifhmode
+\def\safewhatsit#1{\ifhmode
#1%
-\else
+ \else
% \lastskip and \lastpenalty cannot both be nonzero simultaneously.
\whatsitskip = \lastskip
\edef\lastskipmacro{\the\lastskip}%
% to re-insert the same penalty (values >10000 are used for various
% signals); since we just inserted a non-discardable item, any
% following glue (such as a \parskip) would be a breakpoint. For example:
- %
% @deffn deffn-whatever
% @vindex index-whatever
% Description.
% (the whatsit from the \write), so we must insert a \nobreak.
\nobreak\vskip\whatsitskip
\fi
-\fi
-}
+\fi}
% The index entry written in the file actually looks like
% \entry {sortstring}{page}{topic}
% Define @majorheading, @heading and @subheading
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
\def\majorheading{%
{\advance\chapheadingskip by 10pt \chapbreak }%
\parsearg\chapheadingzzz
\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
\def\chapheadingzzz#1{%
- {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\ptexraggedright
- \rmisbold #1\hfill}}%
- \bigskip \par\penalty 200\relax
+ \vbox{\chapfonts \raggedtitlesettings #1\par}%
+ \nobreak\bigskip \nobreak
\suppressfirstparagraphindent
}
% (including whitespace, linebreaking, etc. around it),
% given all the information in convenient, parsed form.
-%%% Args are the skip and penalty (usually negative)
+% Args are the skip and penalty (usually negative)
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
-
\newskip\chapheadingskip
+% Define plain chapter starts, and page on/off switching for it.
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
% Because \domark is called before \chapoddpage, the filler page will
%
% Typeset the actual heading.
\nobreak % Avoid page breaks at the interline glue.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
- \hangindent=\wd0 \centerparametersmaybe
+ \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
\unhbox0 #1\par}%
}%
\nobreak\bigskip % no page break after a chapter title
\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
%
\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\ptexraggedright
- \rmisbold #1\hfill}}\bigskip \par\nobreak
+ \chapoddpage
+ \vbox{\chapfonts \raggedtitlesettings #1\par}%
+ \nobreak\bigskip\nobreak
}
\def\chfopen #1#2{\chapoddpage {\chapfonts
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
\par\penalty 5000 %
}
\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
+ \chapoddpage
+ \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+ \nobreak\bigskip \nobreak
}
\def\CHAPFopen{%
\global\let\chapmacro=\chfopen
%
% We'll almost certainly start a paragraph next, so don't let that
% glue accumulate. (Not a breakpoint because it's preceded by a
- % discardable item.)
+ % discardable item.) However, when a paragraph is not started next
+ % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+ % or the negative glue will cause weirdly wrong output, typically
+ % obscuring the section heading with something else.
\vskip-\parskip
%
- % This is purely so the last item on the list is a known \penalty >
- % 10000. This is so \startdefun can avoid allowing breakpoints after
- % section headings. Otherwise, it would insert a valid breakpoint between:
- %
- % @section sec-whatever
- % @deffn def-whatever
+ % This is so the last item on the main vertical list is a known
+ % \penalty > 10000, so \startdefun, etc., can recognize the situation
+ % and do the needful.
\penalty 10001
}
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
% Flag to tell @lisp, etc., not to narrow margin.
\let\nonarrowing = t%
+ %
+ % If this cartouche directly follows a sectioning command, we need the
+ % \parskip glue (backspaced over by default) or the cartouche can
+ % collide with the section heading.
+ \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+ %
\vbox\bgroup
\baselineskip=0pt\parskip=0pt\lineskip=0pt
\carttop
\lineskip=\normlskip
\parskip=\normpskip
\vskip -\parskip
- \comment % For explanation, see the end of \def\group.
+ \comment % For explanation, see the end of def\group.
}
\def\Ecartouche{%
\ifhmode\par\fi
\newdimen\nonfillparindent
\def\nonfillstart{%
\aboveenvbreak
- \hfuzz = 12pt % Don't be fussy
+ \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy
\sepspaces % Make spaces be word-separators rather than space tokens.
\let\par = \lisppar % don't ignore blank lines
\obeylines % each line of input is a line of output
\makedispenvdef{quotation}{\quotationstart}
%
\def\quotationstart{%
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \parindent=0pt
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+ \indentedblockstart % same as \indentedblock, but increase right margin too.
\ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
\advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \else
- \let\nonarrowing = \relax
\fi
\parsearg\quotationlabel
}
\fi
}
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+%
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+ {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+ \parindent=0pt
+ %
+ % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+ \ifx\nonarrowing\relax
+ \advance\leftskip by \lispnarrowing
+ \exdentamount = \lispnarrowing
+ \else
+ \let\nonarrowing = \relax
+ \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+ \par
+ {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
% If we want to allow any <char> as delimiter,
% commands also insert a nobreak penalty, and we don't want to allow
% a break between a section heading and a defun.
%
- % As a minor refinement, we avoid "club" headers by signalling
+ % As a further refinement, we avoid "club" headers by signalling
% with penalty of 10003 after the very first @deffn in the
% sequence (see above), and penalty of 10002 after any following
% @def command.
\def\domakedefun#1#2#3{%
\envdef#1{%
\startdefun
+ \doingtypefnfalse % distinguish typed functions from all else
\parseargusing\activeparens{\printdefunline#3}%
}%
\def#2{\dodefunx#1}%
\def#3%
}
-%%% Untyped functions:
+\newif\ifdoingtypefn % doing typed function?
+\newif\ifrettypeownline % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line. This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+%
+\parseargdef\deftypefnnewline{%
+ \def\temp{#1}%
+ \ifx\temp\onword
+ \expandafter\let\csname SETtxideftypefnnl\endcsname
+ = \empty
+ \else\ifx\temp\offword
+ \expandafter\let\csname SETtxideftypefnnl\endcsname
+ = \relax
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @txideftypefnnl value `\temp',
+ must be on|off}%
+ \fi\fi
+}
+
+% Untyped functions:
% @deffn category name args
\makedefun{deffn}{\deffngeneral{}}
\defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
}
-%%% Typed functions:
+% Typed functions:
% @deftypefn category type name args
\makedefun{deftypefn}{\deftypefngeneral{}}
%
\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
\dosubind{fn}{\code{#4}}{#1}%
+ \doingtypefntrue
\defname{#2}{#3}{#4}\defunargs{#5\unskip}%
}
-%%% Typed variables:
+% Typed variables:
% @deftypevr category type var args
\makedefun{deftypevr}{\deftypecvgeneral{}}
\defname{#2}{#3}{#4}\defunargs{#5\unskip}%
}
-%%% Untyped variables:
+% Untyped variables:
% @defvr category var args
\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
% \defcvof {category of}class var args
\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
-%%% Type:
+% Types:
+
% @deftp category name args
\makedefun{deftp}#1 #2 #3\endheader{%
\doind{tp}{\code{#2}}%
% We are followed by (but not passed) the arguments, if any.
%
\def\defname#1#2#3{%
+ \par
% Get the values of \leftskip and \rightskip as they were outside the @def...
\advance\leftskip by -\defbodyindent
%
- % How we'll format the type name. Putting it in brackets helps
+ % Determine if we are typesetting the return type of a typed function
+ % on a line by itself.
+ \rettypeownlinefalse
+ \ifdoingtypefn % doing a typed function specifically?
+ % then check user option for putting return type on its own line:
+ \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+ \rettypeownlinetrue
+ \fi
+ \fi
+ %
+ % How we'll format the category name. Putting it in brackets helps
% distinguish it from the body text that may end up on the next line
% just below it.
\def\temp{#1}%
\setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
%
- % Figure out line sizes for the paragraph shape.
+ % Figure out line sizes for the paragraph shape. We'll always have at
+ % least two.
+ \tempnum = 2
+ %
% The first line needs space for \box0; but if \rightskip is nonzero,
% we need only space for the part of \box0 which exceeds it:
\dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
+ %
+ % If doing a return type on its own line, we'll have another line.
+ \ifrettypeownline
+ \advance\tempnum by 1
+ \def\maybeshapeline{0in \hsize}%
+ \else
+ \def\maybeshapeline{}%
+ \fi
+ %
% The continuations:
\dimen2=\hsize \advance\dimen2 by -\defargsindent
- % (plain.tex says that \dimen1 should be used only as global.)
- \parshape 2 0in \dimen0 \defargsindent \dimen2
%
- % Put the type name to the right margin.
+ % The final paragraph shape:
+ \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2
+ %
+ % Put the category name at the right margin.
\noindent
\hbox to 0pt{%
\hfil\box0 \kern-\hsize
% . this still does not fix the ?` and !` ligatures, but so far no
% one has made identifiers using them :).
\df \tt
- \def\temp{#2}% return value type
- \ifx\temp\empty\else \tclose{\temp} \fi
+ \def\temp{#2}% text of the return type
+ \ifx\temp\empty\else
+ \tclose{\temp}% typeset the return type
+ \ifrettypeownline
+ % put return type on its own line; prohibit line break following:
+ \hfil\vadjust{\nobreak}\break
+ \else
+ \space % type on same line, so just followed by a space
+ \fi
+ \fi % no return type
#3% output function name
}%
{\rm\enskip}% hskip 0.5 em of \tenrm
\df \sl \hyphenchar\font=0
%
% On the other hand, if an argument has two dashes (for instance), we
- % want a way to get ttsl. Let's try @var for that.
+ % want a way to get ttsl. We used to recommend @var for that, so
+ % leave the code in, but it's strange for @var to lead to typewriter.
+ % Nowadays we recommend @code, since the difference between a ttsl hyphen
+ % and a tt hyphen is pretty tiny. @code also disables ?` !`.
\def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
#1%
\sl\hyphenchar\font=45
% ... and for \example:
\spaceisspace
%
- % The \empty here causes a following catcode 5 newline to be eaten
- % as part of reading whitespace after a control sequence. It does
- % not eat a catcode 13 newline. There's no good way to handle the
- % two cases. See the Macro Details node in the manual for the
- % workaround we currently have to recommend for macros and
+ % The \empty here causes a following catcode 5 newline to be eaten as
+ % part of reading whitespace after a control sequence. It does not
+ % eat a catcode 13 newline. There's no good way to handle the two
+ % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
+ % would then have different behavior). See the Macro Details node in
+ % the manual for the workaround we recommend for macros and
% line-oriented commands.
+ %
\scantokens{#1\empty}%
\endgroup}
\def\macroxxx#1{%
\getargs{#1}% now \macname is the macname and \argl the arglist
\ifx\argl\empty % no arguments
- \paramno=0
+ \paramno=0\relax
\else
\expandafter\parsemargdef \argl;%
+ \if\paramno>256\relax
+ \ifx\eTeXversion\thisisundefined
+ \errhelp = \EMsimple
+ \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+ \fi
+ \fi
\fi
\if1\csname ismacro.\the\macname\endcsname
\message{Warning: redefining \the\macname}%
\def\getmacname#1 #2\relax{\macname={#1}}
\def\getmacargs#1{\def\argl{#1}}
+% For macro processing make @ a letter so that we can make Texinfo private macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
+
% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.blah for each blah
-% in the params list to be ##N where N is the position in that list.
+% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH
+% in the params list to some hook where the argument si to be expanded. If
+% there are less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.
+%
% That gets used by \mbodybackslash (above).
%
% We need to get `macro parameter char #' into several definitions.
%
% The same technique is used to protect \eatspaces till just before
% the macro is used.
-
+%
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef the body (nothing else will expand because of
+% the catcode regime underwhich the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, you need that no macro has more than 256 arguments, otherwise an
+% error is produced.
\def\parsemargdef#1;{%
\paramno=0\def\paramlist{}%
\let\hash\relax
\let\xeatspaces\relax
\parsemargdefxxx#1,;,%
+ % In case that there are 10 or more arguments we parse again the arguments
+ % list to set new definitions for the \macarg.BLAH macros corresponding to
+ % each BLAH argument. It was anyhow needed to parse already once this list
+ % in order to count the arguments, and as macros with at most 9 arguments
+ % are by far more frequent than macro with 10 or more arguments, defining
+ % twice the \macarg.BLAH macros does not cost too much processing power.
+ \ifnum\paramno<10\relax\else
+ \paramno0\relax
+ \parsemmanyargdef@@#1,;,% 10 or more arguments
+ \fi
}
\def\parsemargdefxxx#1,{%
\if#1;\let\next=\relax
\edef\paramlist{\paramlist\hash\the\paramno,}%
\fi\next}
+\def\parsemmanyargdef@@#1,{%
+ \if#1;\let\next=\relax
+ \else
+ \let\next=\parsemmanyargdef@@
+ \edef\tempb{\eatspaces{#1}}%
+ \expandafter\def\expandafter\tempa
+ \expandafter{\csname macarg.\tempb\endcsname}%
+ % Note that we need some extra \noexpand\noexpand, this is because we
+ % don't want \the to be expanded in the \parsermacbody as it uses an
+ % \xdef .
+ \expandafter\edef\tempa
+ {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+ \advance\paramno by 1\relax
+ \fi\next}
+
% These two commands read recursive and nonrecursive macro bodies.
% (They're different since rec and nonrec macros end differently.)
%
+
+\catcode `\@\texiatcatcode
\long\def\parsemacbody#1@end macro%
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
\long\def\parsermacbody#1@end rmacro%
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\catcode `\@=11\relax
+
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition. It gets all the arguments values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+ \def\macargdeflist@{}%
+ \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+ \def\paramlist{#2,\nil@}%
+ \def\macroname{#1}%
+ \begingroup
+ \macroargctxt
+ \def\argvaluelist{#3,\nil@}%
+ \def\@tempa{#3}%
+ \ifx\@tempa\empty
+ \setemptyargvalues@
+ \else
+ \getargvals@@
+ \fi
+}
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
+%
+\def\getargvals@@{%
+ \ifx\paramlist\nilm@
+ % Some sanity check needed here that \argvaluelist is also empty.
+ \ifx\argvaluelist\nillm@
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Too many arguments in macro `\macroname'!}%
+ \fi
+ \let\next\macargexpandinbody@
+ \else
+ \ifx\argvaluelist\nillm@
+ % No more arguments values passed to macro. Set remaining named-arg
+ % macros to empty.
+ \let\next\setemptyargvalues@
+ \else
+ % pop current arg name into \@tempb
+ \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+ \expandafter\@tempa\expandafter{\paramlist}%
+ % pop current argument value into \@tempc
+ \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+ \expandafter\@tempa\expandafter{\argvaluelist}%
+ % Here \@tempb is the current arg name and \@tempc is the current arg value.
+ % First place the new argument macro definition into \@tempd
+ \expandafter\macname\expandafter{\@tempc}%
+ \expandafter\let\csname macarg.\@tempb\endcsname\relax
+ \expandafter\def\expandafter\@tempe\expandafter{%
+ \csname macarg.\@tempb\endcsname}%
+ \edef\@tempd{\long\def\@tempe{\the\macname}}%
+ \push@\@tempd\macargdeflist@
+ \let\next\getargvals@@
+ \fi
+ \fi
+ \next
+}
+
+\def\push@#1#2{%
+ \expandafter\expandafter\expandafter\def
+ \expandafter\expandafter\expandafter#2%
+ \expandafter\expandafter\expandafter{%
+ \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa
+\def\macvalstoargs@{%
+ % To do this we use the property that token registers that are \the'ed
+ % within an \edef expand only once. So we are going to place all argument
+ % values into respective token registers.
+ %
+ % First we save the token context, and initialize argument numbering.
+ \begingroup
+ \paramno0\relax
+ % Then, for each argument number #N, we place the corresponding argument
+ % value into a new token list register \toks#N
+ \expandafter\putargsintokens@\saveparamlist@,;,%
+ % Then, we expand the body so that argument are replaced by their
+ % values. The trick for values not to be expanded themselves is that they
+ % are within tokens and that tokens expand only once in an \edef .
+ \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+ % Now we restore the token stack pointer to free the token list registers
+ % which we have used, but we make sure that expanded body is saved after
+ % group.
+ \expandafter
+ \endgroup
+ \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+ }
+
+\def\macargexpandinbody@{%
+ %% Define the named-macro outside of this group and then close this group.
+ \expandafter
+ \endgroup
+ \macargdeflist@
+ % First the replace in body the macro arguments by their values, the result
+ % is in \@tempa .
+ \macvalstoargs@
+ % Then we point at the \norecurse or \gobble (for recursive) macro value
+ % with \@tempb .
+ \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+ % Depending on whether it is recursive or not, we need some tailing
+ % \egroup .
+ \ifx\@tempb\gobble
+ \let\@tempc\relax
+ \else
+ \let\@tempc\egroup
+ \fi
+ % And now we do the real job:
+ \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+ \@tempd
+}
+
+\def\putargsintokens@#1,{%
+ \if#1;\let\next\relax
+ \else
+ \let\next\putargsintokens@
+ % First we allocate the new token list register, and give it a temporary
+ % alias \@tempb .
+ \toksdef\@tempb\the\paramno
+ % Then we place the argument value into that token list register.
+ \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+ \expandafter\@tempb\expandafter{\@tempa}%
+ \advance\paramno by 1\relax
+ \fi
+ \next
+}
+
+% Save the token stack pointer into macro #1
+\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
+% Restore the token stack pointer from number in macro #1
+\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
+% newtoks that can be used non \outer .
+\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
+
+% Tailing missing arguments are set to empty
+\def\setemptyargvalues@{%
+ \ifx\paramlist\nilm@
+ \let\next\macargexpandinbody@
+ \else
+ \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+ \let\next\setemptyargvalues@
+ \fi
+ \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+ \expandafter\def\expandafter\@tempa\expandafter{%
+ \expandafter\def\csname macarg.#1\endcsname{}}%
+ \push@\@tempa\macargdeflist@
+ \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+ \def#1{#3}%
+ \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+ \long\def#1{#3}%
+ \long\def#2{#4}%
+}
+
+% This defines a Texinfo @macro. There are eight cases: recursive and
+% nonrecursive macros of zero, one, up to nine, and many arguments.
% Much magic with \expandafter here.
% \xdef is used so that macro definitions will survive the file
% they're defined in; @include reads the file inside a group.
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
\egroup\noexpand\scanmacro{\temp}}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+ \else
+ \ifnum\paramno<10\relax % at most 9
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+ \else % 10 or more
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\getargvals@{\the\macname}{\argl}%
+ }%
+ \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+ \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+ \fi
\fi
\else
\ifcase\paramno
\egroup
\noexpand\norecurse{\the\macname}%
\noexpand\scanmacro{\temp}\egroup}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
+ \else % at most 9
+ \ifnum\paramno<10\relax
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \expandafter\noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \else % 10 or more:
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\getargvals@{\the\macname}{\argl}%
+ }%
+ \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+ \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+ \fi
\fi
\fi}
+\catcode `\@\texiatcatcode\relax
+
\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
% \braceorline decides whether the next nonwhitespace character is a
\fi\fi
}
-
+% \f
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
\def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
\unsepspaces
- \def\printedmanual{\ignorespaces #5}%
+ %
+ % Get args without leading/trailing spaces.
\def\printedrefname{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual\unskip}%
- \setbox0=\hbox{\printedrefname\unskip}%
- \ifdim \wd0 = 0pt
+ \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+ %
+ \def\infofilename{\ignorespaces #4}%
+ \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+ %
+ \def\printedmanual{\ignorespaces #5}%
+ \setbox\printedmanualbox = \hbox{\printedmanual\unskip}%
+ %
+ % If the printed reference name (arg #3) was not explicitly given in
+ % the @xref, figure out what we want to use.
+ \ifdim \wd\printedrefnamebox = 0pt
% No printed node name was explicitly given.
\expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
- % Use the node name inside the square brackets.
+ % Not auto section-title: use node name inside the square brackets.
\def\printedrefname{\ignorespaces #1}%
\else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
+ % Auto section-title: use chapter/section title inside
+ % the square brackets if we have it.
+ \ifdim \wd\printedmanualbox > 0pt
+ % It is in another manual, so we don't have it; use node name.
\def\printedrefname{\ignorespaces #1}%
\else
\ifhavexrefs
- % We know the real title if we have the xref values.
+ % We (should) know the real title if we have the xref values.
\def\printedrefname{\refx{#1-title}{}}%
\else
% Otherwise just copy the Info node name.
\ifpdf
{\indexnofonts
\turnoffactive
+ \makevalueexpandable
% This expands tokens, so do it after making catcode changes, so _
- % etc. don't get their TeX definitions.
+ % etc. don't get their TeX definitions. This ignores all spaces in
+ % #4, including (wrongly) those in the middle of the filename.
\getfilename{#4}%
%
- % See comments at \activebackslashdouble.
- {\activebackslashdouble \xdef\pdfxrefdest{#1}%
- \backslashparens\pdfxrefdest}%
+ % This (wrongly) does not take account of leading or trailing
+ % spaces in #1, which should be ignored.
+ \edef\pdfxrefdest{#1}%
+ \ifx\pdfxrefdest\empty
+ \def\pdfxrefdest{Top}% no empty targets
+ \else
+ \txiescapepdf\pdfxrefdest % escape PDF special chars
+ \fi
%
\leavevmode
\startlink attr{/Border [0 0 0]}%
\iffloat\Xthisreftitle
% If the user specified the print name (third arg) to the ref,
% print it instead of our usual "Figure 1.2".
- \ifdim\wd0 = 0pt
+ \ifdim\wd\printedrefnamebox = 0pt
\refx{#1-snt}{}%
\else
\printedrefname
\fi
%
- % if the user also gave the printed manual name (fifth arg), append
+ % If the user also gave the printed manual name (fifth arg), append
% "in MANUALNAME".
- \ifdim \wd1 > 0pt
+ \ifdim \wd\printedmanualbox > 0pt
\space \putwordin{} \cite{\printedmanual}%
\fi
\else
% node/anchor (non-float) references.
+ %
+ % If we use \unhbox to print the node names, TeX does not insert
+ % empty discretionaries after hyphens, which means that it will not
+ % find a line break at a hyphen in a node names. Since some manuals
+ % are best written with fairly long node names, containing hyphens,
+ % this is a loss. Therefore, we give the text of the node name
+ % again, so it is as if TeX is seeing it for the first time.
+ %
+ \ifdim \wd\printedmanualbox > 0pt
+ % Cross-manual reference with a printed manual name.
+ %
+ \crossmanualxref{\cite{\printedmanual\unskip}}%
+ %
+ \else\ifdim \wd\infofilenamebox > 0pt
+ % Cross-manual reference with only an info filename (arg 4), no
+ % printed manual name (arg 5). This is essentially the same as
+ % the case above; we output the filename, since we have nothing else.
+ %
+ \crossmanualxref{\code{\infofilename\unskip}}%
%
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifdim \wd1 > 0pt
- \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
\else
+ % Reference within this manual.
+ %
% _ (for example) has to be the character _ for the purposes of the
% control sequence corresponding to the node, but it has to expand
% into the usual \leavevmode...\vrule stuff for purposes of
\setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
\ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
}%
- % output the `[mynode]' via a macro so it can be overridden.
+ % output the `[mynode]' via the macro below so it can be overridden.
\xrefprintnodename\printedrefname
%
% But we always want a comma and a space:
%
% output the `page 3'.
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- \fi
+ \fi\fi
\fi
\endlink
\endgroup}
+% Output a cross-manual xref to #1. Used just above (twice).
+%
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+%
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input. By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font). Hopefully it will never happen in practice.
+%
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+%
+\def\crossmanualxref#1{%
+ \setbox\toprefbox = \hbox{Top\kern7sp}%
+ \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+ \ifdim \wd2 > 7sp % nonempty?
+ \ifdim \wd2 = \wd\toprefbox \else % same as Top?
+ \putwordSection{} ``\printedrefname'' \putwordin{}\space
+ \fi
+ \fi
+ #1%
+}
+
% This macro is called from \xrefX for the `[nodename]' part of xref
% output. It's a separate macro only so it can be changed more easily,
% since square brackets don't work well in some documents. Particularly
% space to prevent strange expansion errors.)
\def\supereject{\par\penalty -20000\footnoteno =0 }
-% @footnotestyle is meaningful for info output only.
+% @footnotestyle is meaningful for Info output only.
\let\footnotestyle=\comment
{\catcode `\@=11
% expands into a box, it must come within the paragraph, lest it
% provide a place where TeX can split the footnote.
\footstrut
+ %
+ % Invoke rest of plain TeX footnote routine.
\futurelet\next\fo@t
}
}%end \catcode `\@=11
it from ftp://tug.org/tex/epsf.tex.}
%
\def\image#1{%
- \ifx\epsfbox\thisiundefined
+ \ifx\epsfbox\thisisundefined
\ifwarnednoepsf \else
\errhelp = \noepsfhelp
\errmessage{epsf.tex not found, images will be ignored}%
% If the image is by itself, center it.
\ifvmode
\imagevmodetrue
+ \else \ifx\centersub\centerV
+ % for @center @image, we need a vbox so we can have our vertical space
+ \imagevmodetrue
+ \vbox\bgroup % vbox has better behavior than vtop herev
+ \fi\fi
+ %
+ \ifimagevmode
\nobreak\medskip
% Usually we'll have text after the image which will insert
% \parskip glue, so insert it here too to equalize the space
\fi
%
% Leave vertical mode so that indentation from an enclosing
- % environment such as @quotation is respected. On the other hand, if
- % it's at the top level, we don't want the normal paragraph indentation.
- \noindent
+ % environment such as @quotation is respected.
+ % However, if we're at the top level, we don't want the
+ % normal paragraph indentation.
+ % On the other hand, if we are in the case of @center @image, we don't
+ % want to start a paragraph, which will create a hsize-width box and
+ % eradicate the centering.
+ \ifx\centersub\centerV\else \noindent \fi
%
% Output the image.
\ifpdf
\epsfbox{#1.eps}%
\fi
%
- \ifimagevmode \medskip \fi % space after the standalone image
+ \ifimagevmode
+ \medskip % space after a standalone image
+ \fi
+ \ifx\centersub\centerV \egroup \fi
\endgroup}
%
% Latin1 (ISO-8859-1) character definitions.
\def\latonechardefs{%
- \gdef^^a0{~}
+ \gdef^^a0{\tie}
\gdef^^a1{\exclamdown}
\gdef^^a2{\missingcharmsg{CENT SIGN}}
\gdef^^a3{{\pounds}}
% Latin2 (ISO-8859-2) character definitions.
\def\lattwochardefs{%
- \gdef^^a0{~}
+ \gdef^^a0{\tie}
\gdef^^a1{\ogonek{A}}
\gdef^^a2{\u{}}
\gdef^^a3{\L}
\message{and turning on texinfo input format.}
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
% DEL is a comment character, in case @c does not suffice.
\catcode`\^^? = 14
% In texinfo, backslash is an active character; it prints the backslash
% in fixed width font.
-\catcode`\\=\active
-@def@normalbackslash{{@tt@backslashcurfont}}
+\catcode`\\=\active % @ for escape char from now on.
+
+% The story here is that in math mode, the \char of \backslashcurfont
+% ends up printing the roman \ from the math symbol font (because \char
+% in math mode uses the \mathcode, and plain.tex sets
+% \mathcode`\\="026E). It seems better for @backslashchar{} to always
+% print a typewriter backslash, hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C). We can't use " for the
+% usual hex value because it has already been made active.
+@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents.
+
% On startup, @fixbackslash assigns:
% @let \ = @normalbackslash
-
% \rawbackslash defines an active \ to do \backslashcurfont.
% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
+% catcode other. We switch back and forth between these.
@gdef@rawbackslash{@let\=@backslashcurfont}
@gdef@otherbackslash{@let\=@realbackslash}
% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
-@def@normalturnoffactive{%
- @let"=@normaldoublequote
- @let$=@normaldollar %$ font-lock fix
- @let+=@normalplus
- @let<=@normalless
- @let>=@normalgreater
- @let\=@normalbackslash
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let~=@normaltilde
- @markupsetuplqdefault
- @markupsetuprqdefault
- @unsepspaces
+% the literal character `\'. Also revert - to its normal character, in
+% case the active - from code has slipped in.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+ @let-=@normaldash
+ @let"=@normaldoublequote
+ @let$=@normaldollar %$ font-lock fix
+ @let+=@normalplus
+ @let<=@normalless
+ @let>=@normalgreater
+ @let\=@normalbackslash
+ @let^=@normalcaret
+ @let_=@normalunderscore
+ @let|=@normalverticalbar
+ @let~=@normaltilde
+ @markupsetuplqdefault
+ @markupsetuprqdefault
+ @unsepspaces
+ }
}
% Make _ and + \other characters, temporarily.
@def@normalslash{/}
% These look ok in all fonts, so just make them not special.
+% @hashchar{} gets its own user-level command, because of #line.
@catcode`@& = @other @def@normalamp{&}
@catcode`@# = @other @def@normalhash{#}
@catcode`@% = @other @def@normalpercent{%}
+@let @hashchar = @normalhash
+
@c Finally, make ` and ' active, so that txicodequoteundirected and
@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we
@c don't make ` and ' active, @code will not get them as active chars.
projects / debian / tar / blobdiff