Merge commit 'v3.3.0' into upstream

[debian/gnuradio] / usrp2 / firmware / apps / serdes_to_dsp.c

diff --git a/usrp2/firmware/apps/serdes_to_dsp.c b/usrp2/firmware/apps/serdes_to_dsp.c
new file mode 100644 (file)
index 0000000..a9876d9
--- /dev/null
+++ b/usrp2/firmware/apps/serdes_to_dsp.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2007,2008 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "spi.h"
+#include "hal_io.h"
+#include "buffer_pool.h"
+#include "pic.h"
+#include "bool.h"
+#include "ethernet.h"
+#include "nonstdio.h"
+#include "usrp2_eth_packet.h"
+#include "dbsm.h"
+#include "app_common.h"
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+
+/*
+ * This program can respond to queries from the host
+ * and stream rx samples.
+ *
+ * Buffer 1 is used by the cpu to send frames to the host.
+ * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow
+ * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx  eth flow
+ */
+//#define CPU_RX_BUF   0       // eth -> cpu
+//#define CPU_TX_BUF   1       // cpu -> eth
+
+#define        DSP_RX_BUF_0    2       // dsp rx -> eth (double buffer)
+#define        DSP_RX_BUF_1    3       // dsp rx -> eth
+#define        DSP_TX_BUF_0    4       // eth -> dsp tx (double buffer)
+#define        DSP_TX_BUF_1    5       // eth -> dsp tx
+
+/*
+ * ================================================================
+ *      configure DSP TX double buffering state machine
+ * ================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp)
+// DSP Tx reads word0 (flags) + timestamp followed by samples
+
+#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4)
+
+// Receive from ethernet
+buf_cmd_args_t dsp_tx_recv_args = {
+  PORT_SERDES,
+  0,
+  BP_LAST_LINE
+};
+
+// send to DSP Tx
+buf_cmd_args_t dsp_tx_send_args = {
+  PORT_DSP,
+  DSP_TX_FIRST_LINE,   // starts just past transport header
+  0                    // filled in from last_line register
+};
+
+dbsm_t dsp_tx_sm;      // the state machine
+
+
+// ----------------------------------------------------------------
+
+
+// The mac address of the host we're sending to.
+u2_mac_addr_t host_mac_addr;
+
+
+void
+start_rx_cmd(const u2_mac_addr_t *host, op_start_rx_t *p)
+{
+}
+
+void
+stop_rx_cmd(void)
+{
+}
+
+static void
+setup_tx()
+{
+  dsp_tx_regs->clear_state = 1;
+  bp_clear_buf(DSP_TX_BUF_0);
+  bp_clear_buf(DSP_TX_BUF_1);
+
+  int tx_scale = 256;
+  int interp = 32;
+
+  op_config_tx_t def_config;
+  memset(&def_config, 0, sizeof(def_config));
+  def_config.phase_inc  = 408021893;                   // 9.5 MHz [2**32 * fc/fsample]
+  def_config.scale_iq = (tx_scale << 16) | tx_scale;
+  def_config.interp = interp;
+
+  // setup Tx DSP regs
+  config_tx_cmd(&def_config);
+}
+
+
+inline static void
+buffer_irq_handler(unsigned irq)
+{
+  //hal_toggle_leds(0x2);
+
+  uint32_t  status = buffer_pool_status->status;
+
+  dbsm_process_status(&dsp_tx_sm, status);
+
+  if (status & BPS_DONE(CPU_TX_BUF)){
+    bp_clear_buf(CPU_TX_BUF);
+  }
+}
+
+int
+main(void)
+{
+  u2_init();
+
+  // Get our clock from the mimo interface
+
+  clocks_enable_test_clk(true,1);
+  clocks_mimo_config(MC_WE_LOCK_TO_MIMO);
+  
+  // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output
+  //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111");
+  //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111");
+
+  putstr("\nserdes_to_dsp\n");
+
+  ethernet_register_link_changed_callback(link_changed_callback);
+  ethernet_init();
+
+
+  // initialize double buffering state machine for ethernet -> DSP Tx
+
+  dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0,
+           &dsp_tx_recv_args, &dsp_tx_send_args,
+           eth_pkt_inspector);
+
+  // program tx registers
+  setup_tx();
+
+  // kick off the state machine
+  dbsm_start(&dsp_tx_sm);
+
+  while(1){
+    buffer_irq_handler(0);
+
+    int pending = pic_regs->pending;   // poll for under or overrun
+
+    if (pending & PIC_UNDERRUN_INT){
+      dbsm_handle_tx_underrun(&dsp_tx_sm);
+      pic_regs->pending = PIC_UNDERRUN_INT;    // clear interrupt
+      putchar('U');
+    }
+  }
+}
+