--- /dev/null
+/* -*- c++ -*- */
+/*
+ * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc.
+ *
+ * This file is part of GNU Radio
+ *
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ *
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING. If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "usrp/usrp_basic.h"
+#include "usrp/usrp_prims.h"
+#include "usrp_interfaces.h"
+#include "fpga_regs_common.h"
+#include "fpga_regs_standard.h"
+#include "fusb.h"
+#include "db_boards.h"
+#include <stdexcept>
+#include <assert.h>
+#include <math.h>
+#include <ad9862.h>
+#include <string.h>
+#include <cstdio>
+
+using namespace ad9862;
+
+#define NELEM(x) (sizeof (x) / sizeof (x[0]))
+
+// These set the buffer size used for each end point using the fast
+// usb interface. The kernel ends up locking down this much memory.
+
+static const int FUSB_BUFFER_SIZE = fusb_sysconfig::default_buffer_size();
+static const int FUSB_BLOCK_SIZE = fusb_sysconfig::max_block_size();
+static const int FUSB_NBLOCKS = FUSB_BUFFER_SIZE / FUSB_BLOCK_SIZE;
+
+
+static const double POLLING_INTERVAL = 0.1; // seconds
+
+////////////////////////////////////////////////////////////////
+
+static libusb_device_handle *
+open_rx_interface (libusb_device *dev)
+{
+ libusb_device_handle *udh = usrp_open_rx_interface (dev);
+ if (udh == 0){
+ fprintf (stderr, "usrp_basic_rx: can't open rx interface\n");
+ }
+ return udh;
+}
+
+static libusb_device_handle *
+open_tx_interface (libusb_device *dev)
+{
+ libusb_device_handle *udh = usrp_open_tx_interface (dev);
+ if (udh == 0){
+ fprintf (stderr, "usrp_basic_tx: can't open tx interface\n");
+ }
+ return udh;
+}
+
+//////////////////////////////////////////////////////////////////
+//
+// usrp_basic
+//
+////////////////////////////////////////////////////////////////
+
+// Given:
+// CLKIN = 64 MHz
+// CLKSEL pin = high
+//
+// These settings give us:
+// CLKOUT1 = CLKIN = 64 MHz
+// CLKOUT2 = CLKIN = 64 MHz
+// ADC is clocked at 64 MHz
+// DAC is clocked at 128 MHz
+
+static unsigned char common_regs[] = {
+ REG_GENERAL, 0,
+ REG_DLL, (DLL_DISABLE_INTERNAL_XTAL_OSC
+ | DLL_MULT_2X
+ | DLL_FAST),
+ REG_CLKOUT, CLKOUT2_EQ_DLL_OVER_2,
+ REG_AUX_ADC_CLK, AUX_ADC_CLK_CLK_OVER_4
+};
+
+usrp_basic::usrp_basic (int which_board,
+ libusb_device_handle *
+ open_interface (libusb_device *dev),
+ const std::string fpga_filename,
+ const std::string firmware_filename)
+ : d_udh (0), d_ctx (0),
+ d_usb_data_rate (16000000), // SWAG, see below
+ d_bytes_per_poll ((int) (POLLING_INTERVAL * d_usb_data_rate)),
+ d_verbose (false), d_fpga_master_clock_freq(64000000), d_db(2)
+{
+ /*
+ * SWAG: Scientific Wild Ass Guess.
+ *
+ * d_usb_data_rate is used only to determine how often to poll for over- and
+ * under-runs. We defualt it to 1/2 of our best case. Classes derived from
+ * usrp_basic (e.g., usrp_standard_tx and usrp_standard_rx) call
+ * set_usb_data_rate() to tell us the actual rate. This doesn't change our
+ * throughput, that's determined by the signal processing code in the FPGA
+ * (which we know nothing about), and the system limits determined by libusb,
+ * fusb_*, and the underlying drivers.
+ */
+ memset (d_fpga_shadows, 0, sizeof (d_fpga_shadows));
+
+ usrp_one_time_init (&d_ctx);
+
+ if (!usrp_load_standard_bits (which_board, false, fpga_filename,
+ firmware_filename, d_ctx))
+ throw std::runtime_error ("usrp_basic/usrp_load_standard_bits");
+
+ libusb_device *dev = usrp_find_device (which_board, false, d_ctx);
+ if (dev == 0){
+ fprintf (stderr, "usrp_basic: can't find usrp[%d]\n", which_board);
+ throw std::runtime_error ("usrp_basic/usrp_find_device");
+ }
+
+ if (!(usrp_usrp_p(dev) && usrp_hw_rev(dev) >= 1)){
+ fprintf (stderr, "usrp_basic: sorry, this code only works with USRP revs >= 1\n");
+ throw std::runtime_error ("usrp_basic/bad_rev");
+ }
+
+ if ((d_udh = open_interface (dev)) == 0)
+ throw std::runtime_error ("usrp_basic/open_interface");
+
+ // initialize registers that are common to rx and tx
+
+ if (!usrp_9862_write_many_all (d_udh, common_regs, sizeof (common_regs))) {
+ fprintf (stderr, "usrp_basic: failed to init common AD9862 regs\n");
+ throw std::runtime_error ("usrp_basic/init_9862");
+ }
+
+ _write_fpga_reg (FR_MODE, 0); // ensure we're in normal mode
+ _write_fpga_reg (FR_DEBUG_EN, 0); // disable debug outputs
+
+}
+
+usrp_basic::~usrp_basic ()
+{
+ d_db.resize(0); // forget db shared ptrs
+
+ if (d_udh)
+ usrp_close_interface (d_udh);
+
+ usrp_deinit (d_ctx);
+}
+
+void
+usrp_basic::shutdown_daughterboards()
+{
+ // nuke d'boards before we close down USB in ~usrp_basic
+ // shutdown() will do any board shutdown while the USRP can still
+ // be talked to
+ for(size_t i = 0; i < d_db.size(); i++)
+ for(size_t j = 0; j < d_db[i].size(); j++)
+ d_db[i][j]->shutdown();
+}
+
+void
+usrp_basic::init_db(usrp_basic_sptr u)
+{
+ if (u.get() != this)
+ throw std::invalid_argument("u is not this");
+
+ d_db[0] = instantiate_dbs(d_dbid[0], u, 0);
+ d_db[1] = instantiate_dbs(d_dbid[1], u, 1);
+}
+
+std::vector<db_base_sptr>
+usrp_basic::db(int which_side)
+{
+ which_side &= 0x1; // clamp it to avoid any reporting any errors
+ return d_db[which_side];
+}
+
+bool
+usrp_basic::is_valid(const usrp_subdev_spec &ss)
+{
+ if (ss.side < 0 || ss.side > 1)
+ return false;
+
+ if (ss.subdev < 0 || ss.subdev >= d_db[ss.side].size())
+ return false;
+
+ return true;
+}
+
+db_base_sptr
+usrp_basic::selected_subdev(const usrp_subdev_spec &ss)
+{
+ if (!is_valid(ss))
+ throw std::invalid_argument("invalid subdev_spec");
+
+ return d_db[ss.side][ss.subdev];
+}
+
+bool
+usrp_basic::start ()
+{
+ return true; // nop
+}
+
+bool
+usrp_basic::stop ()
+{
+ return true; // nop
+}
+
+void
+usrp_basic::set_usb_data_rate (int usb_data_rate)
+{
+ d_usb_data_rate = usb_data_rate;
+ d_bytes_per_poll = (int) (usb_data_rate * POLLING_INTERVAL);
+}
+
+bool
+usrp_basic::_write_aux_dac (int slot, int which_dac, int value)
+{
+ return usrp_write_aux_dac (d_udh, slot, which_dac, value);
+}
+
+bool
+usrp_basic::_read_aux_adc (int slot, int which_adc, int *value)
+{
+ return usrp_read_aux_adc (d_udh, slot, which_adc, value);
+}
+
+int
+usrp_basic::_read_aux_adc (int slot, int which_adc)
+{
+ int value;
+ if (!_read_aux_adc (slot, which_adc, &value))
+ return READ_FAILED;
+
+ return value;
+}
+
+bool
+usrp_basic::write_eeprom (int i2c_addr, int eeprom_offset, const std::string buf)
+{
+ return usrp_eeprom_write (d_udh, i2c_addr, eeprom_offset, buf.data (), buf.size ());
+}
+
+std::string
+usrp_basic::read_eeprom (int i2c_addr, int eeprom_offset, int len)
+{
+ if (len <= 0)
+ return "";
+
+ char buf[len];
+
+ if (!usrp_eeprom_read (d_udh, i2c_addr, eeprom_offset, buf, len))
+ return "";
+
+ return std::string (buf, len);
+}
+
+bool
+usrp_basic::write_i2c (int i2c_addr, const std::string buf)
+{
+ return usrp_i2c_write (d_udh, i2c_addr, buf.data (), buf.size ());
+}
+
+std::string
+usrp_basic::read_i2c (int i2c_addr, int len)
+{
+ if (len <= 0)
+ return "";
+
+ char buf[len];
+
+ if (!usrp_i2c_read (d_udh, i2c_addr, buf, len))
+ return "";
+
+ return std::string (buf, len);
+}
+
+std::string
+usrp_basic::serial_number()
+{
+ return usrp_serial_number(d_udh);
+}
+
+// ----------------------------------------------------------------
+
+bool
+usrp_basic::set_adc_offset (int which_adc, int offset)
+{
+ if (which_adc < 0 || which_adc > 3)
+ return false;
+
+ return _write_fpga_reg (FR_ADC_OFFSET_0 + which_adc, offset);
+}
+
+bool
+usrp_basic::set_dac_offset (int which_dac, int offset, int offset_pin)
+{
+ if (which_dac < 0 || which_dac > 3)
+ return false;
+
+ int which_codec = which_dac >> 1;
+ int tx_a = (which_dac & 0x1) == 0;
+ int lo = ((offset & 0x3) << 6) | (offset_pin & 0x1);
+ int hi = (offset >> 2);
+ bool ok;
+
+ if (tx_a){
+ ok = _write_9862 (which_codec, REG_TX_A_OFFSET_LO, lo);
+ ok &= _write_9862 (which_codec, REG_TX_A_OFFSET_HI, hi);
+ }
+ else {
+ ok = _write_9862 (which_codec, REG_TX_B_OFFSET_LO, lo);
+ ok &= _write_9862 (which_codec, REG_TX_B_OFFSET_HI, hi);
+ }
+ return ok;
+}
+
+bool
+usrp_basic::set_adc_buffer_bypass (int which_adc, bool bypass)
+{
+ if (which_adc < 0 || which_adc > 3)
+ return false;
+
+ int codec = which_adc >> 1;
+ int reg = (which_adc & 1) == 0 ? REG_RX_A : REG_RX_B;
+
+ unsigned char cur_rx;
+ unsigned char cur_pwr_dn;
+
+ // If the input buffer is bypassed, we need to power it down too.
+
+ bool ok = _read_9862 (codec, reg, &cur_rx);
+ ok &= _read_9862 (codec, REG_RX_PWR_DN, &cur_pwr_dn);
+ if (!ok)
+ return false;
+
+ if (bypass){
+ cur_rx |= RX_X_BYPASS_INPUT_BUFFER;
+ cur_pwr_dn |= ((which_adc & 1) == 0) ? RX_PWR_DN_BUF_A : RX_PWR_DN_BUF_B;
+ }
+ else {
+ cur_rx &= ~RX_X_BYPASS_INPUT_BUFFER;
+ cur_pwr_dn &= ~(((which_adc & 1) == 0) ? RX_PWR_DN_BUF_A : RX_PWR_DN_BUF_B);
+ }
+
+ ok &= _write_9862 (codec, reg, cur_rx);
+ ok &= _write_9862 (codec, REG_RX_PWR_DN, cur_pwr_dn);
+ return ok;
+}
+
+bool
+usrp_basic::set_dc_offset_cl_enable(int bits, int mask)
+{
+ return _write_fpga_reg(FR_DC_OFFSET_CL_EN,
+ (d_fpga_shadows[FR_DC_OFFSET_CL_EN] & ~mask) | (bits & mask));
+}
+
+// ----------------------------------------------------------------
+
+bool
+usrp_basic::_write_fpga_reg (int regno, int value)
+{
+ if (d_verbose){
+ fprintf (stdout, "_write_fpga_reg(%3d, 0x%08x)\n", regno, value);
+ fflush (stdout);
+ }
+
+ if (regno >= 0 && regno < MAX_REGS)
+ d_fpga_shadows[regno] = value;
+
+ return usrp_write_fpga_reg (d_udh, regno, value);
+}
+
+bool
+usrp_basic::_write_fpga_reg_masked (int regno, int value, int mask)
+{
+ //Only use this for registers who actually use a mask in the verilog firmware, like FR_RX_MASTER_SLAVE
+ //value is a 16 bits value and mask is a 16 bits mask
+ if (d_verbose){
+ fprintf (stdout, "_write_fpga_reg_masked(%3d, 0x%04x,0x%04x)\n", regno, value, mask);
+ fflush (stdout);
+ }
+
+ if (regno >= 0 && regno < MAX_REGS)
+ d_fpga_shadows[regno] = value;
+
+ return usrp_write_fpga_reg (d_udh, regno, (value & 0xffff) | ((mask & 0xffff)<<16));
+}
+
+
+bool
+usrp_basic::_read_fpga_reg (int regno, int *value)
+{
+ return usrp_read_fpga_reg (d_udh, regno, value);
+}
+
+int
+usrp_basic::_read_fpga_reg (int regno)
+{
+ int value;
+ if (!_read_fpga_reg (regno, &value))
+ return READ_FAILED;
+ return value;
+}
+
+bool
+usrp_basic::_write_9862 (int which_codec, int regno, unsigned char value)
+{
+ if (0 && d_verbose){
+ // FIXME really want to enable logging in usrp_prims:usrp_9862_write
+ fprintf(stdout, "_write_9862(codec = %d, regno = %2d, val = 0x%02x)\n", which_codec, regno, value);
+ fflush(stdout);
+ }
+
+ return usrp_9862_write (d_udh, which_codec, regno, value);
+}
+
+
+bool
+usrp_basic::_read_9862 (int which_codec, int regno, unsigned char *value) const
+{
+ return usrp_9862_read (d_udh, which_codec, regno, value);
+}
+
+int
+usrp_basic::_read_9862 (int which_codec, int regno) const
+{
+ unsigned char value;
+ if (!_read_9862 (which_codec, regno, &value))
+ return READ_FAILED;
+ return value;
+}
+
+bool
+usrp_basic::_write_spi (int optional_header, int enables, int format, std::string buf)
+{
+ return usrp_spi_write (d_udh, optional_header, enables, format,
+ buf.data(), buf.size());
+}
+
+std::string
+usrp_basic::_read_spi (int optional_header, int enables, int format, int len)
+{
+ if (len <= 0)
+ return "";
+
+ char buf[len];
+
+ if (!usrp_spi_read (d_udh, optional_header, enables, format, buf, len))
+ return "";
+
+ return std::string (buf, len);
+}
+
+
+bool
+usrp_basic::_set_led (int which_led, bool on)
+{
+ return usrp_set_led (d_udh, which_led, on);
+}
+
+bool
+usrp_basic::write_atr_tx_delay(int value)
+{
+ return _write_fpga_reg(FR_ATR_TX_DELAY, value);
+}
+
+bool
+usrp_basic::write_atr_rx_delay(int value)
+{
+ return _write_fpga_reg(FR_ATR_RX_DELAY, value);
+}
+
+/*
+ * ----------------------------------------------------------------
+ * Routines to access and control daughterboard specific i/o
+ * ----------------------------------------------------------------
+ */
+static int
+slot_id_to_oe_reg (int slot_id)
+{
+ static int reg[4] = { FR_OE_0, FR_OE_1, FR_OE_2, FR_OE_3 };
+ assert (0 <= slot_id && slot_id < 4);
+ return reg[slot_id];
+}
+
+static int
+slot_id_to_io_reg (int slot_id)
+{
+ static int reg[4] = { FR_IO_0, FR_IO_1, FR_IO_2, FR_IO_3 };
+ assert (0 <= slot_id && slot_id < 4);
+ return reg[slot_id];
+}
+
+static int
+slot_id_to_refclk_reg(int slot_id)
+{
+ static int reg[4] = { FR_TX_A_REFCLK, FR_RX_A_REFCLK, FR_TX_B_REFCLK, FR_RX_B_REFCLK };
+ assert (0 <= slot_id && slot_id < 4);
+ return reg[slot_id];
+}
+
+static int
+slot_id_to_atr_mask_reg(int slot_id)
+{
+ static int reg[4] = { FR_ATR_MASK_0, FR_ATR_MASK_1, FR_ATR_MASK_2, FR_ATR_MASK_3 };
+ assert (0 <= slot_id && slot_id < 4);
+ return reg[slot_id];
+}
+
+static int
+slot_id_to_atr_txval_reg(int slot_id)
+{
+ static int reg[4] = { FR_ATR_TXVAL_0, FR_ATR_TXVAL_1, FR_ATR_TXVAL_2, FR_ATR_TXVAL_3 };
+ assert (0 <= slot_id && slot_id < 4);
+ return reg[slot_id];
+}
+
+static int
+slot_id_to_atr_rxval_reg(int slot_id)
+{
+ static int reg[4] = { FR_ATR_RXVAL_0, FR_ATR_RXVAL_1, FR_ATR_RXVAL_2, FR_ATR_RXVAL_3 };
+ assert (0 <= slot_id && slot_id < 4);
+ return reg[slot_id];
+}
+
+static int
+to_slot(txrx_t txrx, int which_side)
+{
+ // TX_A = 0
+ // RX_A = 1
+ // TX_B = 2
+ // RX_B = 3
+ return ((which_side & 0x1) << 1) | ((txrx & 0x1) == C_RX);
+}
+
+bool
+usrp_basic::common_set_pga(txrx_t txrx, int which_amp, double gain)
+{
+ if (which_amp < 0 || which_amp > 3)
+ return false;
+
+ gain = std::min(common_pga_max(txrx),
+ std::max(common_pga_min(txrx), gain));
+
+ int codec = which_amp >> 1;
+ int int_gain = (int) rint((gain - common_pga_min(txrx)) / common_pga_db_per_step(txrx));
+
+ if (txrx == C_TX){ // 0 and 1 are same, as are 2 and 3
+ return _write_9862(codec, REG_TX_PGA, int_gain);
+ }
+ else {
+ int reg = (which_amp & 1) == 0 ? REG_RX_A : REG_RX_B;
+
+ // read current value to get input buffer bypass flag.
+ unsigned char cur_rx;
+ if (!_read_9862(codec, reg, &cur_rx))
+ return false;
+
+ cur_rx = (cur_rx & RX_X_BYPASS_INPUT_BUFFER) | (int_gain & 0x7f);
+ return _write_9862(codec, reg, cur_rx);
+ }
+}
+
+double
+usrp_basic::common_pga(txrx_t txrx, int which_amp) const
+{
+ if (which_amp < 0 || which_amp > 3)
+ return READ_FAILED;
+
+ if (txrx == C_TX){
+ int codec = which_amp >> 1;
+ unsigned char v;
+ bool ok = _read_9862 (codec, REG_TX_PGA, &v);
+ if (!ok)
+ return READ_FAILED;
+
+ return (pga_db_per_step() * v) + pga_min();
+ }
+ else {
+ int codec = which_amp >> 1;
+ int reg = (which_amp & 1) == 0 ? REG_RX_A : REG_RX_B;
+ unsigned char v;
+ bool ok = _read_9862 (codec, reg, &v);
+ if (!ok)
+ return READ_FAILED;
+
+ return (pga_db_per_step() * (v & 0x1f)) + pga_min();
+ }
+}
+
+double
+usrp_basic::common_pga_min(txrx_t txrx) const
+{
+ if (txrx == C_TX)
+ return -20.0;
+ else
+ return 0.0;
+}
+
+double
+usrp_basic::common_pga_max(txrx_t txrx) const
+{
+ if (txrx == C_TX)
+ return 0.0;
+ else
+ return 20.0;
+}
+
+double
+usrp_basic::common_pga_db_per_step(txrx_t txrx) const
+{
+ if (txrx == C_TX)
+ return 20.0 / 255;
+ else
+ return 20.0 / 20;
+}
+
+bool
+usrp_basic::_common_write_oe(txrx_t txrx, int which_side, int value, int mask)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ return _write_fpga_reg(slot_id_to_oe_reg(to_slot(txrx, which_side)),
+ (mask << 16) | (value & 0xffff));
+}
+
+bool
+usrp_basic::common_write_io(txrx_t txrx, int which_side, int value, int mask)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ return _write_fpga_reg(slot_id_to_io_reg(to_slot(txrx, which_side)),
+ (mask << 16) | (value & 0xffff));
+}
+
+bool
+usrp_basic::common_read_io(txrx_t txrx, int which_side, int *value)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ int t;
+ int reg = which_side + 1; // FIXME, *very* magic number (fix in serial_io.v)
+ bool ok = _read_fpga_reg(reg, &t);
+ if (!ok)
+ return false;
+
+ if (txrx == C_TX){
+ *value = t & 0xffff; // FIXME, more magic
+ return true;
+ }
+ else {
+ *value = (t >> 16) & 0xffff; // FIXME, more magic
+ return true;
+ }
+}
+
+int
+usrp_basic::common_read_io(txrx_t txrx, int which_side)
+{
+ int value;
+ if (!common_read_io(txrx, which_side, &value))
+ return READ_FAILED;
+ return value;
+}
+
+bool
+usrp_basic::common_write_refclk(txrx_t txrx, int which_side, int value)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ return _write_fpga_reg(slot_id_to_refclk_reg(to_slot(txrx, which_side)),
+ value);
+}
+
+bool
+usrp_basic::common_write_atr_mask(txrx_t txrx, int which_side, int value)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ return _write_fpga_reg(slot_id_to_atr_mask_reg(to_slot(txrx, which_side)),
+ value);
+}
+
+bool
+usrp_basic::common_write_atr_txval(txrx_t txrx, int which_side, int value)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ return _write_fpga_reg(slot_id_to_atr_txval_reg(to_slot(txrx, which_side)),
+ value);
+}
+
+bool
+usrp_basic::common_write_atr_rxval(txrx_t txrx, int which_side, int value)
+{
+ if (! (0 <= which_side && which_side <= 1))
+ return false;
+
+ return _write_fpga_reg(slot_id_to_atr_rxval_reg(to_slot(txrx, which_side)),
+ value);
+}
+
+bool
+usrp_basic::common_write_aux_dac(txrx_t txrx, int which_side, int which_dac, int value)
+{
+ return _write_aux_dac(to_slot(txrx, which_side), which_dac, value);
+}
+
+bool
+usrp_basic::common_read_aux_adc(txrx_t txrx, int which_side, int which_adc, int *value)
+{
+ return _read_aux_adc(to_slot(txrx, which_side), which_adc, value);
+}
+
+int
+usrp_basic::common_read_aux_adc(txrx_t txrx, int which_side, int which_adc)
+{
+ return _read_aux_adc(to_slot(txrx, which_side), which_adc);
+}
+
+
+////////////////////////////////////////////////////////////////
+//
+// usrp_basic_rx
+//
+////////////////////////////////////////////////////////////////
+
+static unsigned char rx_init_regs[] = {
+ REG_RX_PWR_DN, 0,
+ REG_RX_A, 0, // minimum gain = 0x00 (max gain = 0x14)
+ REG_RX_B, 0, // minimum gain = 0x00 (max gain = 0x14)
+ REG_RX_MISC, (RX_MISC_HS_DUTY_CYCLE | RX_MISC_CLK_DUTY),
+ REG_RX_IF, (RX_IF_USE_CLKOUT1
+ | RX_IF_2S_COMP),
+ REG_RX_DIGITAL, (RX_DIGITAL_2_CHAN)
+};
+
+
+usrp_basic_rx::usrp_basic_rx (int which_board, int fusb_block_size, int fusb_nblocks,
+ const std::string fpga_filename,
+ const std::string firmware_filename
+ )
+ : usrp_basic (which_board, open_rx_interface, fpga_filename, firmware_filename),
+ d_devhandle (0), d_ephandle (0),
+ d_bytes_seen (0), d_first_read (true),
+ d_rx_enable (false)
+{
+ // initialize rx specific registers
+
+ if (!usrp_9862_write_many_all (d_udh, rx_init_regs, sizeof (rx_init_regs))){
+ fprintf (stderr, "usrp_basic_rx: failed to init AD9862 RX regs\n");
+ throw std::runtime_error ("usrp_basic_rx/init_9862");
+ }
+
+ if (0){
+ // FIXME power down 2nd codec rx path
+ usrp_9862_write (d_udh, 1, REG_RX_PWR_DN, 0x1); // power down everything
+ }
+
+ // Reset the rx path and leave it disabled.
+ set_rx_enable (false);
+ usrp_set_fpga_rx_reset (d_udh, true);
+ usrp_set_fpga_rx_reset (d_udh, false);
+
+ set_fpga_rx_sample_rate_divisor (2); // usually correct
+
+ set_dc_offset_cl_enable(0xf, 0xf); // enable DC offset removal control loops
+
+ probe_rx_slots (false);
+
+ //d_db[0] = instantiate_dbs(d_dbid[0], this, 0);
+ //d_db[1] = instantiate_dbs(d_dbid[1], this, 1);
+
+ // check fusb buffering parameters
+
+ if (fusb_block_size < 0 || fusb_block_size > FUSB_BLOCK_SIZE)
+ throw std::out_of_range ("usrp_basic_rx: invalid fusb_block_size");
+
+ if (fusb_nblocks < 0)
+ throw std::out_of_range ("usrp_basic_rx: invalid fusb_nblocks");
+
+ if (fusb_block_size == 0)
+ fusb_block_size = fusb_sysconfig::default_block_size();
+
+ if (fusb_nblocks == 0)
+ fusb_nblocks = std::max (1, FUSB_BUFFER_SIZE / fusb_block_size);
+
+ d_devhandle = fusb_sysconfig::make_devhandle (d_udh, d_ctx);
+ d_ephandle = d_devhandle->make_ephandle (USRP_RX_ENDPOINT, true,
+ fusb_block_size, fusb_nblocks);
+
+ write_atr_mask(0, 0); // zero Rx A Auto Transmit/Receive regs
+ write_atr_txval(0, 0);
+ write_atr_rxval(0, 0);
+ write_atr_mask(1, 0); // zero Rx B Auto Transmit/Receive regs
+ write_atr_txval(1, 0);
+ write_atr_rxval(1, 0);
+}
+
+static unsigned char rx_fini_regs[] = {
+ REG_RX_PWR_DN, 0x1 // power down everything
+};
+
+usrp_basic_rx::~usrp_basic_rx ()
+{
+ if (!set_rx_enable (false)){
+ fprintf (stderr, "usrp_basic_rx: set_fpga_rx_enable failed\n");
+ }
+
+ d_ephandle->stop ();
+ delete d_ephandle;
+ delete d_devhandle;
+
+ if (!usrp_9862_write_many_all (d_udh, rx_fini_regs, sizeof (rx_fini_regs))){
+ fprintf (stderr, "usrp_basic_rx: failed to fini AD9862 RX regs\n");
+ }
+
+ shutdown_daughterboards();
+}
+
+
+bool
+usrp_basic_rx::start ()
+{
+ if (!usrp_basic::start ()) // invoke parent's method
+ return false;
+
+ // fire off reads before asserting rx_enable
+
+ if (!d_ephandle->start ()){
+ fprintf (stderr, "usrp_basic_rx: failed to start end point streaming");
+ return false;
+ }
+
+ if (!set_rx_enable (true)){
+ fprintf (stderr, "usrp_basic_rx: set_rx_enable failed\n");
+ return false;
+ }
+
+ return true;
+}
+
+bool
+usrp_basic_rx::stop ()
+{
+ bool ok = usrp_basic::stop();
+
+ if (!set_rx_enable(false)){
+ fprintf (stderr, "usrp_basic_rx: set_rx_enable(false) failed\n");
+ ok = false;
+ }
+
+ if (!d_ephandle->stop()){
+ fprintf (stderr, "usrp_basic_rx: failed to stop end point streaming");
+ ok = false;
+ }
+
+ return ok;
+}
+
+usrp_basic_rx *
+usrp_basic_rx::make (int which_board, int fusb_block_size, int fusb_nblocks,
+ const std::string fpga_filename,
+ const std::string firmware_filename)
+{
+ usrp_basic_rx *u = 0;
+
+ try {
+ u = new usrp_basic_rx (which_board, fusb_block_size, fusb_nblocks,
+ fpga_filename, firmware_filename);
+ return u;
+ }
+ catch (...){
+ delete u;
+ return 0;
+ }
+
+ return u;
+}
+
+bool
+usrp_basic_rx::set_fpga_rx_sample_rate_divisor (unsigned int div)
+{
+ return _write_fpga_reg (FR_RX_SAMPLE_RATE_DIV, div - 1);
+}
+
+
+/*
+ * \brief read data from the D/A's via the FPGA.
+ * \p len must be a multiple of 512 bytes.
+ *
+ * \returns the number of bytes read, or -1 on error.
+ *
+ * If overrun is non-NULL it will be set true iff an RX overrun is detected.
+ */
+int
+usrp_basic_rx::read (void *buf, int len, bool *overrun)
+{
+ int r;
+
+ if (overrun)
+ *overrun = false;
+
+ if (len < 0 || (len % 512) != 0){
+ fprintf (stderr, "usrp_basic_rx::read: invalid length = %d\n", len);
+ return -1;
+ }
+
+ r = d_ephandle->read (buf, len);
+ if (r > 0)
+ d_bytes_seen += r;
+
+ /*
+ * In many cases, the FPGA reports an rx overrun right after we
+ * enable the Rx path. If this is our first read, check for the
+ * overrun to clear the condition, then ignore the result.
+ */
+ if (0 && d_first_read){ // FIXME
+ d_first_read = false;
+ bool bogus_overrun;
+ usrp_check_rx_overrun (d_udh, &bogus_overrun);
+ }
+
+ if (overrun != 0 && d_bytes_seen >= d_bytes_per_poll){
+ d_bytes_seen = 0;
+ if (!usrp_check_rx_overrun (d_udh, overrun)){
+ fprintf (stderr, "usrp_basic_rx: usrp_check_rx_overrun failed\n");
+ }
+ }
+
+ return r;
+}
+
+bool
+usrp_basic_rx::set_rx_enable (bool on)
+{
+ d_rx_enable = on;
+ return usrp_set_fpga_rx_enable (d_udh, on);
+}
+
+// conditional disable, return prev state
+bool
+usrp_basic_rx::disable_rx ()
+{
+ bool enabled = rx_enable ();
+ if (enabled)
+ set_rx_enable (false);
+ return enabled;
+}
+
+// conditional set
+void
+usrp_basic_rx::restore_rx (bool on)
+{
+ if (on != rx_enable ())
+ set_rx_enable (on);
+}
+
+void
+usrp_basic_rx::probe_rx_slots (bool verbose)
+{
+ struct usrp_dboard_eeprom eeprom;
+ static int slot_id_map[2] = { SLOT_RX_A, SLOT_RX_B };
+ static const char *slot_name[2] = { "RX d'board A", "RX d'board B" };
+
+ for (int i = 0; i < 2; i++){
+ int slot_id = slot_id_map [i];
+ const char *msg = 0;
+ usrp_dbeeprom_status_t s = usrp_read_dboard_eeprom (d_udh, slot_id, &eeprom);
+
+ switch (s){
+ case UDBE_OK:
+ d_dbid[i] = eeprom.id;
+ msg = usrp_dbid_to_string (eeprom.id).c_str ();
+ set_adc_offset (2*i+0, eeprom.offset[0]);
+ set_adc_offset (2*i+1, eeprom.offset[1]);
+ _write_fpga_reg (slot_id_to_oe_reg(slot_id), (0xffff << 16) | eeprom.oe);
+ _write_fpga_reg (slot_id_to_io_reg(slot_id), (0xffff << 16) | 0x0000);
+ break;
+
+ case UDBE_NO_EEPROM:
+ d_dbid[i] = -1;
+ msg = "<none>";
+ _write_fpga_reg (slot_id_to_oe_reg(slot_id), (0xffff << 16) | 0x0000);
+ _write_fpga_reg (slot_id_to_io_reg(slot_id), (0xffff << 16) | 0x0000);
+ break;
+
+ case UDBE_INVALID_EEPROM:
+ d_dbid[i] = -2;
+ msg = "Invalid EEPROM contents";
+ _write_fpga_reg (slot_id_to_oe_reg(slot_id), (0xffff << 16) | 0x0000);
+ _write_fpga_reg (slot_id_to_io_reg(slot_id), (0xffff << 16) | 0x0000);
+ break;
+
+ case UDBE_BAD_SLOT:
+ default:
+ assert (0);
+ }
+
+ if (verbose){
+ fflush (stdout);
+ fprintf (stderr, "%s: %s\n", slot_name[i], msg);
+ }
+ }
+}
+
+bool
+usrp_basic_rx::set_pga (int which_amp, double gain)
+{
+ return common_set_pga(C_RX, which_amp, gain);
+}
+
+double
+usrp_basic_rx::pga(int which_amp) const
+{
+ return common_pga(C_RX, which_amp);
+}
+
+double
+usrp_basic_rx::pga_min() const
+{
+ return common_pga_min(C_RX);
+}
+
+double
+usrp_basic_rx::pga_max() const
+{
+ return common_pga_max(C_RX);
+}
+
+double
+usrp_basic_rx::pga_db_per_step() const
+{
+ return common_pga_db_per_step(C_RX);
+}
+
+bool
+usrp_basic_rx::_write_oe (int which_side, int value, int mask)
+{
+ return _common_write_oe(C_RX, which_side, value, mask);
+}
+
+bool
+usrp_basic_rx::write_io (int which_side, int value, int mask)
+{
+ return common_write_io(C_RX, which_side, value, mask);
+}
+
+bool
+usrp_basic_rx::read_io (int which_side, int *value)
+{
+ return common_read_io(C_RX, which_side, value);
+}
+
+int
+usrp_basic_rx::read_io (int which_side)
+{
+ return common_read_io(C_RX, which_side);
+}
+
+bool
+usrp_basic_rx::write_refclk(int which_side, int value)
+{
+ return common_write_refclk(C_RX, which_side, value);
+}
+
+bool
+usrp_basic_rx::write_atr_mask(int which_side, int value)
+{
+ return common_write_atr_mask(C_RX, which_side, value);
+}
+
+bool
+usrp_basic_rx::write_atr_txval(int which_side, int value)
+{
+ return common_write_atr_txval(C_RX, which_side, value);
+}
+
+bool
+usrp_basic_rx::write_atr_rxval(int which_side, int value)
+{
+ return common_write_atr_rxval(C_RX, which_side, value);
+}
+
+bool
+usrp_basic_rx::write_aux_dac (int which_side, int which_dac, int value)
+{
+ return common_write_aux_dac(C_RX, which_side, which_dac, value);
+}
+
+bool
+usrp_basic_rx::read_aux_adc (int which_side, int which_adc, int *value)
+{
+ return common_read_aux_adc(C_RX, which_side, which_adc, value);
+}
+
+int
+usrp_basic_rx::read_aux_adc (int which_side, int which_adc)
+{
+ return common_read_aux_adc(C_RX, which_side, which_adc);
+}
+
+int
+usrp_basic_rx::block_size () const { return d_ephandle->block_size(); }
+
+////////////////////////////////////////////////////////////////
+//
+// usrp_basic_tx
+//
+////////////////////////////////////////////////////////////////
+
+
+//
+// DAC input rate 64 MHz interleaved for a total input rate of 128 MHz
+// DAC input is latched on rising edge of CLKOUT2
+// NCO is disabled
+// interpolate 2x
+// coarse modulator disabled
+//
+
+static unsigned char tx_init_regs[] = {
+ REG_TX_PWR_DN, 0,
+ REG_TX_A_OFFSET_LO, 0,
+ REG_TX_A_OFFSET_HI, 0,
+ REG_TX_B_OFFSET_LO, 0,
+ REG_TX_B_OFFSET_HI, 0,
+ REG_TX_A_GAIN, (TX_X_GAIN_COARSE_FULL | 0),
+ REG_TX_B_GAIN, (TX_X_GAIN_COARSE_FULL | 0),
+ REG_TX_PGA, 0xff, // maximum gain (0 dB)
+ REG_TX_MISC, 0,
+ REG_TX_IF, (TX_IF_USE_CLKOUT1
+ | TX_IF_I_FIRST
+ | TX_IF_INV_TX_SYNC
+ | TX_IF_2S_COMP
+ | TX_IF_INTERLEAVED),
+ REG_TX_DIGITAL, (TX_DIGITAL_2_DATA_PATHS
+ | TX_DIGITAL_INTERPOLATE_4X),
+ REG_TX_MODULATOR, (TX_MODULATOR_DISABLE_NCO
+ | TX_MODULATOR_COARSE_MODULATION_NONE),
+ REG_TX_NCO_FTW_7_0, 0,
+ REG_TX_NCO_FTW_15_8, 0,
+ REG_TX_NCO_FTW_23_16, 0
+};
+
+usrp_basic_tx::usrp_basic_tx (int which_board, int fusb_block_size, int fusb_nblocks,
+ const std::string fpga_filename,
+ const std::string firmware_filename)
+ : usrp_basic (which_board, open_tx_interface, fpga_filename, firmware_filename),
+ d_devhandle (0), d_ephandle (0),
+ d_bytes_seen (0), d_first_write (true),
+ d_tx_enable (false)
+{
+ if (!usrp_9862_write_many_all (d_udh, tx_init_regs, sizeof (tx_init_regs))){
+ fprintf (stderr, "usrp_basic_tx: failed to init AD9862 TX regs\n");
+ throw std::runtime_error ("usrp_basic_tx/init_9862");
+ }
+
+ if (0){
+ // FIXME power down 2nd codec tx path
+ usrp_9862_write (d_udh, 1, REG_TX_PWR_DN,
+ (TX_PWR_DN_TX_DIGITAL
+ | TX_PWR_DN_TX_ANALOG_BOTH));
+ }
+
+ // Reset the tx path and leave it disabled.
+ set_tx_enable (false);
+ usrp_set_fpga_tx_reset (d_udh, true);
+ usrp_set_fpga_tx_reset (d_udh, false);
+
+ set_fpga_tx_sample_rate_divisor (4); // we're using interp x4
+
+ probe_tx_slots (false);
+
+ //d_db[0] = instantiate_dbs(d_dbid[0], this, 0);
+ //d_db[1] = instantiate_dbs(d_dbid[1], this, 1);
+
+ // check fusb buffering parameters
+
+ if (fusb_block_size < 0 || fusb_block_size > FUSB_BLOCK_SIZE)
+ throw std::out_of_range ("usrp_basic_rx: invalid fusb_block_size");
+
+ if (fusb_nblocks < 0)
+ throw std::out_of_range ("usrp_basic_rx: invalid fusb_nblocks");
+
+ if (fusb_block_size == 0)
+ fusb_block_size = FUSB_BLOCK_SIZE;
+
+ if (fusb_nblocks == 0)
+ fusb_nblocks = std::max (1, FUSB_BUFFER_SIZE / fusb_block_size);
+
+ d_devhandle = fusb_sysconfig::make_devhandle (d_udh, d_ctx);
+ d_ephandle = d_devhandle->make_ephandle (USRP_TX_ENDPOINT, false,
+ fusb_block_size, fusb_nblocks);
+
+ write_atr_mask(0, 0); // zero Tx A Auto Transmit/Receive regs
+ write_atr_txval(0, 0);
+ write_atr_rxval(0, 0);
+ write_atr_mask(1, 0); // zero Tx B Auto Transmit/Receive regs
+ write_atr_txval(1, 0);
+ write_atr_rxval(1, 0);
+}
+
+
+static unsigned char tx_fini_regs[] = {
+ REG_TX_PWR_DN, (TX_PWR_DN_TX_DIGITAL
+ | TX_PWR_DN_TX_ANALOG_BOTH),
+ REG_TX_MODULATOR, (TX_MODULATOR_DISABLE_NCO
+ | TX_MODULATOR_COARSE_MODULATION_NONE)
+};
+
+usrp_basic_tx::~usrp_basic_tx ()
+{
+ d_ephandle->stop ();
+ delete d_ephandle;
+ delete d_devhandle;
+
+ if (!usrp_9862_write_many_all (d_udh, tx_fini_regs, sizeof (tx_fini_regs))){
+ fprintf (stderr, "usrp_basic_tx: failed to fini AD9862 TX regs\n");
+ }
+
+ shutdown_daughterboards();
+}
+
+bool
+usrp_basic_tx::start ()
+{
+ if (!usrp_basic::start ())
+ return false;
+
+ if (!set_tx_enable (true)){
+ fprintf (stderr, "usrp_basic_tx: set_tx_enable failed\n");
+ return false;
+ }
+
+ if (!d_ephandle->start ()){
+ fprintf (stderr, "usrp_basic_tx: failed to start end point streaming");
+ return false;
+ }
+
+ return true;
+}
+
+bool
+usrp_basic_tx::stop ()
+{
+ bool ok = usrp_basic::stop ();
+
+ if (!d_ephandle->stop ()){
+ fprintf (stderr, "usrp_basic_tx: failed to stop end point streaming");
+ ok = false;
+ }
+
+ if (!set_tx_enable (false)){
+ fprintf (stderr, "usrp_basic_tx: set_tx_enable(false) failed\n");
+ ok = false;
+ }
+
+ return ok;
+}
+
+usrp_basic_tx *
+usrp_basic_tx::make (int which_board, int fusb_block_size, int fusb_nblocks,
+ const std::string fpga_filename,
+ const std::string firmware_filename)
+{
+ usrp_basic_tx *u = 0;
+
+ try {
+ u = new usrp_basic_tx (which_board, fusb_block_size, fusb_nblocks,
+ fpga_filename, firmware_filename);
+ return u;
+ }
+ catch (...){
+ delete u;
+ return 0;
+ }
+
+ return u;
+}
+
+bool
+usrp_basic_tx::set_fpga_tx_sample_rate_divisor (unsigned int div)
+{
+ return _write_fpga_reg (FR_TX_SAMPLE_RATE_DIV, div - 1);
+}
+
+/*!
+ * \brief Write data to the A/D's via the FPGA.
+ *
+ * \p len must be a multiple of 512 bytes.
+ * \returns number of bytes written or -1 on error.
+ *
+ * if \p underrun is non-NULL, it will be set to true iff
+ * a transmit underrun condition is detected.
+ */
+int
+usrp_basic_tx::write (const void *buf, int len, bool *underrun)
+{
+ int r;
+
+ if (underrun)
+ *underrun = false;
+
+ if (len < 0 || (len % 512) != 0){
+ fprintf (stderr, "usrp_basic_tx::write: invalid length = %d\n", len);
+ return -1;
+ }
+
+ r = d_ephandle->write (buf, len);
+ if (r > 0)
+ d_bytes_seen += r;
+
+ /*
+ * In many cases, the FPGA reports an tx underrun right after we
+ * enable the Tx path. If this is our first write, check for the
+ * underrun to clear the condition, then ignore the result.
+ */
+ if (d_first_write && d_bytes_seen >= 4 * FUSB_BLOCK_SIZE){
+ d_first_write = false;
+ bool bogus_underrun;
+ usrp_check_tx_underrun (d_udh, &bogus_underrun);
+ }
+
+ if (underrun != 0 && d_bytes_seen >= d_bytes_per_poll){
+ d_bytes_seen = 0;
+ if (!usrp_check_tx_underrun (d_udh, underrun)){
+ fprintf (stderr, "usrp_basic_tx: usrp_check_tx_underrun failed\n");
+ }
+ }
+
+ return r;
+}
+
+void
+usrp_basic_tx::wait_for_completion ()
+{
+ d_ephandle->wait_for_completion ();
+}
+
+bool
+usrp_basic_tx::set_tx_enable (bool on)
+{
+ d_tx_enable = on;
+ // fprintf (stderr, "set_tx_enable %d\n", on);
+ return usrp_set_fpga_tx_enable (d_udh, on);
+}
+
+// conditional disable, return prev state
+bool
+usrp_basic_tx::disable_tx ()
+{
+ bool enabled = tx_enable ();
+ if (enabled)
+ set_tx_enable (false);
+ return enabled;
+}
+
+// conditional set
+void
+usrp_basic_tx::restore_tx (bool on)
+{
+ if (on != tx_enable ())
+ set_tx_enable (on);
+}
+
+void
+usrp_basic_tx::probe_tx_slots (bool verbose)
+{
+ struct usrp_dboard_eeprom eeprom;
+ static int slot_id_map[2] = { SLOT_TX_A, SLOT_TX_B };
+ static const char *slot_name[2] = { "TX d'board A", "TX d'board B" };
+
+ for (int i = 0; i < 2; i++){
+ int slot_id = slot_id_map [i];
+ const char *msg = 0;
+ usrp_dbeeprom_status_t s = usrp_read_dboard_eeprom (d_udh, slot_id, &eeprom);
+
+ switch (s){
+ case UDBE_OK:
+ d_dbid[i] = eeprom.id;
+ msg = usrp_dbid_to_string (eeprom.id).c_str ();
+ // FIXME, figure out interpretation of dc offset for TX d'boards
+ // offset = (eeprom.offset[1] << 16) | (eeprom.offset[0] & 0xffff);
+ _write_fpga_reg (slot_id_to_oe_reg(slot_id), (0xffff << 16) | eeprom.oe);
+ _write_fpga_reg (slot_id_to_io_reg(slot_id), (0xffff << 16) | 0x0000);
+ break;
+
+ case UDBE_NO_EEPROM:
+ d_dbid[i] = -1;
+ msg = "<none>";
+ _write_fpga_reg (slot_id_to_oe_reg(slot_id), (0xffff << 16) | 0x0000);
+ _write_fpga_reg (slot_id_to_io_reg(slot_id), (0xffff << 16) | 0x0000);
+ break;
+
+ case UDBE_INVALID_EEPROM:
+ d_dbid[i] = -2;
+ msg = "Invalid EEPROM contents";
+ _write_fpga_reg (slot_id_to_oe_reg(slot_id), (0xffff << 16) | 0x0000);
+ _write_fpga_reg (slot_id_to_io_reg(slot_id), (0xffff << 16) | 0x0000);
+ break;
+
+ case UDBE_BAD_SLOT:
+ default:
+ assert (0);
+ }
+
+ if (verbose){
+ fflush (stdout);
+ fprintf (stderr, "%s: %s\n", slot_name[i], msg);
+ }
+ }
+}
+
+bool
+usrp_basic_tx::set_pga (int which_amp, double gain)
+{
+ return common_set_pga(C_TX, which_amp, gain);
+}
+
+double
+usrp_basic_tx::pga (int which_amp) const
+{
+ return common_pga(C_TX, which_amp);
+}
+
+double
+usrp_basic_tx::pga_min() const
+{
+ return common_pga_min(C_TX);
+}
+
+double
+usrp_basic_tx::pga_max() const
+{
+ return common_pga_max(C_TX);
+}
+
+double
+usrp_basic_tx::pga_db_per_step() const
+{
+ return common_pga_db_per_step(C_TX);
+}
+
+bool
+usrp_basic_tx::_write_oe (int which_side, int value, int mask)
+{
+ return _common_write_oe(C_TX, which_side, value, mask);
+}
+
+bool
+usrp_basic_tx::write_io (int which_side, int value, int mask)
+{
+ return common_write_io(C_TX, which_side, value, mask);
+}
+
+bool
+usrp_basic_tx::read_io (int which_side, int *value)
+{
+ return common_read_io(C_TX, which_side, value);
+}
+
+int
+usrp_basic_tx::read_io (int which_side)
+{
+ return common_read_io(C_TX, which_side);
+}
+
+bool
+usrp_basic_tx::write_refclk(int which_side, int value)
+{
+ return common_write_refclk(C_TX, which_side, value);
+}
+
+bool
+usrp_basic_tx::write_atr_mask(int which_side, int value)
+{
+ return common_write_atr_mask(C_TX, which_side, value);
+}
+
+bool
+usrp_basic_tx::write_atr_txval(int which_side, int value)
+{
+ return common_write_atr_txval(C_TX, which_side, value);
+}
+
+bool
+usrp_basic_tx::write_atr_rxval(int which_side, int value)
+{
+ return common_write_atr_rxval(C_TX, which_side, value);
+}
+
+bool
+usrp_basic_tx::write_aux_dac (int which_side, int which_dac, int value)
+{
+ return common_write_aux_dac(C_TX, which_side, which_dac, value);
+}
+
+bool
+usrp_basic_tx::read_aux_adc (int which_side, int which_adc, int *value)
+{
+ return common_read_aux_adc(C_TX, which_side, which_adc, value);
+}
+
+int
+usrp_basic_tx::read_aux_adc (int which_side, int which_adc)
+{
+ return common_read_aux_adc(C_TX, which_side, which_adc);
+}
+
+int
+usrp_basic_tx::block_size () const { return d_ephandle->block_size(); }
+
projects / debian / gnuradio / blobdiff