--- /dev/null
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ *
+ * This file is part of GNU Radio
+ *
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ *
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING. If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_AD9862_H
+#define INCLUDED_AD9862_H
+
+/*
+ * Analog Devices AD9862 registers and some fields
+ */
+
+#define BEGIN_AD9862 namespace ad9862 {
+#define END_AD962 }
+#define DEF static const int
+
+BEGIN_AD9862;
+
+DEF REG_GENERAL = 0;
+DEF REG_RX_PWR_DN = 1;
+DEF RX_PWR_DN_VREF_DIFF = (1 << 7);
+DEF RX_PWR_DN_VREF = (1 << 6);
+DEF RX_PWR_DN_RX_DIGIGAL = (1 << 5);
+DEF RX_PWR_DN_RX_B = (1 << 4);
+DEF RX_PWR_DN_RX_A = (1 << 3);
+DEF RX_PWR_DN_BUF_B = (1 << 2);
+DEF RX_PWR_DN_BUF_A = (1 << 1);
+DEF RX_PWR_DN_ALL = (1 << 0);
+
+DEF REG_RX_A = 2; // bypass input buffer / RxPGA
+DEF REG_RX_B = 3; // pypass input buffer / RxPGA
+DEF RX_X_BYPASS_INPUT_BUFFER = (1 << 7);
+
+DEF REG_RX_MISC = 4;
+DEF RX_MISC_HS_DUTY_CYCLE = (1 << 2);
+DEF RX_MISC_SHARED_REF = (1 << 1);
+DEF RX_MISC_CLK_DUTY = (1 << 0);
+
+DEF REG_RX_IF = 5;
+DEF RX_IF_THREE_STATE = (1 << 4);
+DEF RX_IF_USE_CLKOUT1 = (0 << 3);
+DEF RX_IF_USE_CLKOUT2 = (1 << 3); // aka Rx Retime
+DEF RX_IF_2S_COMP = (1 << 2);
+DEF RX_IF_INV_RX_SYNC = (1 << 1);
+DEF RX_IF_MUX_OUT = (1 << 0);
+
+DEF REG_RX_DIGITAL = 6;
+DEF RX_DIGITAL_2_CHAN = (1 << 3);
+DEF RX_DIGITAL_KEEP_MINUS_VE = (1 << 2);
+DEF RX_DIGITAL_HILBERT = (1 << 1);
+DEF RX_DIGITAL_DECIMATE = (1 << 0);
+
+DEF REG_RESERVED_7 = 7;
+
+DEF REG_TX_PWR_DN = 8;
+DEF TX_PWR_DN_ALT_TIMING_MODE = (1 << 5);
+DEF TX_PWR_DN_TX_OFF_ENABLE = (1 << 4);
+DEF TX_PWR_DN_TX_DIGITAL = (1 << 3);
+DEF TX_PWR_DN_TX_ANALOG_B = 0x4;
+DEF TX_PWR_DN_TX_ANALOG_A = 0x2;
+DEF TX_PWR_DN_TX_ANALOG_BOTH = 0x7;
+
+DEF REG_RESERVED_9 = 9;
+
+DEF REG_TX_A_OFFSET_LO = 10;
+DEF REG_TX_A_OFFSET_HI = 11;
+DEF REG_TX_B_OFFSET_LO = 12;
+DEF REG_TX_B_OFFSET_HI = 13;
+
+DEF REG_TX_A_GAIN = 14; // fine trim for matching
+DEF REG_TX_B_GAIN = 15; // fine trim for matching
+DEF TX_X_GAIN_COARSE_FULL = (3 << 6);
+DEF TX_X_GAIN_COARSE_1_HALF = (1 << 6);
+DEF TX_X_GAIN_COARSE_1_ELEVENTH = (0 << 6);
+
+DEF REG_TX_PGA = 16; // 20 dB continuous gain in 0.1 dB steps
+ // 0x00 = min gain (-20 dB)
+ // 0xff = max gain ( 0 dB)
+
+DEF REG_TX_MISC = 17;
+DEF TX_MISC_SLAVE_ENABLE = (1 << 1);
+DEF TX_MISC_TX_PGA_FAST = (1 << 0);
+
+DEF REG_TX_IF = 18;
+DEF TX_IF_USE_CLKOUT2 = (0 << 6);
+DEF TX_IF_USE_CLKOUT1 = (1 << 6); // aka Tx Retime
+DEF TX_IF_I_FIRST = (0 << 5);
+DEF TX_IF_Q_FIRST = (1 << 5);
+DEF TX_IF_INV_TX_SYNC = (1 << 4);
+DEF TX_IF_2S_COMP = (1 << 3);
+DEF TX_IF_INVERSE_SAMPLE = (1 << 2);
+DEF TX_IF_TWO_EDGES = (1 << 1);
+DEF TX_IF_INTERLEAVED = (1 << 0);
+
+DEF REG_TX_DIGITAL = 19;
+DEF TX_DIGITAL_2_DATA_PATHS = (1 << 4);
+DEF TX_DIGITAL_KEEP_NEGATIVE = (1 << 3);
+DEF TX_DIGITAL_HILBERT = (1 << 2);
+DEF TX_DIGITAL_INTERPOLATE_NONE = 0x0;
+DEF TX_DIGITAL_INTERPOLATE_2X = 0x1;
+DEF TX_DIGITAL_INTERPOLATE_4X = 0x2;
+
+DEF REG_TX_MODULATOR = 20;
+DEF TX_MODULATOR_NEG_FINE_TUNE = (1 << 5);
+DEF TX_MODULATOR_DISABLE_NCO = (0 << 4);
+DEF TX_MODULATOR_ENABLE_NCO = (1 << 4); // aka Fine Mode
+DEF TX_MODULATOR_REAL_MIX_MODE = (1 << 3);
+DEF TX_MODULATOR_NEG_COARSE_TUNE = (1 << 2);
+DEF TX_MODULATOR_COARSE_MODULATION_NONE = 0x0;
+DEF TX_MODULATOR_COARSE_MODULATION_F_OVER_4 = 0x1;
+DEF TX_MODULATOR_COARSE_MODULATION_F_OVER_8 = 0x2;
+DEF TX_MODULATOR_CM_MASK = 0x7;
+
+
+DEF REG_TX_NCO_FTW_7_0 = 21;
+DEF REG_TX_NCO_FTW_15_8 = 22;
+DEF REG_TX_NCO_FTW_23_16= 23;
+
+DEF REG_DLL = 24;
+DEF DLL_DISABLE_INTERNAL_XTAL_OSC = (1 << 6); // aka Input Clock Ctrl
+DEF DLL_ADC_DIV2 = (1 << 5);
+DEF DLL_MULT_1X = (0 << 3);
+DEF DLL_MULT_2X = (1 << 3);
+DEF DLL_MULT_4X = (2 << 3);
+DEF DLL_PWR_DN = (1 << 2);
+// undefined bit = (1 << 1);
+DEF DLL_FAST = (1 << 0);
+
+DEF REG_CLKOUT = 25;
+DEF CLKOUT2_EQ_DLL = (0 << 6);
+DEF CLKOUT2_EQ_DLL_OVER_2 = (1 << 6);
+DEF CLKOUT2_EQ_DLL_OVER_4 = (2 << 6);
+DEF CLKOUT2_EQ_DLL_OVER_8 = (3 << 6);
+DEF CLKOUT_INVERT_CLKOUT2 = (1 << 5);
+DEF CLKOUT_DISABLE_CLKOUT2 = (1 << 4);
+// undefined bit = (1 << 3);
+// undefined bit = (1 << 2);
+DEF CLKOUT_INVERT_CLKOUT1 = (1 << 1);
+DEF CLKOUT_DISABLE_CLKOUT1 = (1 << 0);
+
+DEF REG_AUX_ADC_A2_LO = 26;
+DEF REG_AUX_ADC_A2_HI = 27;
+DEF REG_AUX_ADC_A1_LO = 28;
+DEF REG_AUX_ADC_A1_HI = 29;
+DEF REG_AUX_ADC_B2_LO = 30;
+DEF REG_AUX_ADC_B2_HI = 31;
+DEF REG_AUX_ADC_B1_LO = 32;
+DEF REG_AUX_ADC_B1_HI = 33;
+
+DEF REG_AUX_ADC_CTRL = 34;
+DEF AUX_ADC_CTRL_AUX_SPI = (1 << 7);
+DEF AUX_ADC_CTRL_SELBNOTA = (1 << 6);
+DEF AUX_ADC_CTRL_REFSEL_B = (1 << 5);
+DEF AUX_ADC_CTRL_SELECT_B2 = (0 << 4);
+DEF AUX_ADC_CTRL_SELECT_B1 = (1 << 4);
+DEF AUX_ADC_CTRL_START_B = (1 << 3);
+DEF AUX_ADC_CTRL_REFSEL_A = (1 << 2);
+DEF AUX_ADC_CTRL_SELECT_A2 = (0 << 1);
+DEF AUX_ADC_CTRL_SELECT_A1 = (1 << 1);
+DEF AUX_ADC_CTRL_START_A = (1 << 0);
+
+DEF REG_AUX_ADC_CLK = 35;
+DEF AUX_ADC_CLK_CLK_OVER_4 = (1 << 0);
+
+DEF REG_AUX_DAC_A = 36;
+DEF REG_AUX_DAC_B = 37;
+DEF REG_AUX_DAC_C = 38;
+
+DEF REG_AUX_DAC_UPDATE = 39;
+DEF AUX_DAC_UPDATE_SLAVE_ENABLE = (1 << 7);
+DEF AUX_DAC_UPDATE_C = (1 << 2);
+DEF AUX_DAC_UPDATE_B = (1 << 1);
+DEF AUX_DAC_UPDATE_A = (1 << 0);
+
+DEF REG_AUX_DAC_PWR_DN = 40;
+DEF AUX_DAC_PWR_DN_C = (1 << 2);
+DEF AUX_DAC_PWR_DN_B = (1 << 1);
+DEF AUX_DAC_PWR_DN_A = (1 << 0);
+
+DEF REG_AUX_DAC_CTRL = 41;
+DEF AUX_DAC_CTRL_INV_C = (1 << 4);
+DEF AUX_DAC_CTRL_INV_B = (1 << 2);
+DEF AUX_DAC_CTRL_INV_A = (1 << 0);
+
+DEF REG_SIGDELT_LO = 42;
+DEF REG_SIGDELT_HI = 43;
+
+// 44 to 48 reserved
+
+DEF REG_ADC_LOW_PWR_LO = 49;
+DEF REG_ADC_LOW_PWR_HI = 50;
+
+// 51 to 62 reserved
+
+DEF REG_CHIP_ID = 63;
+
+
+END_AD962;
+
+#undef DEF
+#undef BEGIN_AD9862
+#undef END_AD962
+
+#endif /* INCLUDED_AD9862_H */
projects / debian / gnuradio / blobdiff