Imported Upstream version 3.12

[debian/elilo] / docs / netbooting.txt

diff --git a/docs/netbooting.txt b/docs/netbooting.txt
index 130cc11691ba665f1110292338fba6e8f71a409e..8815c0b45de993387406b7dc3c070fa773685b73 100644 (file)
--- a/docs/netbooting.txt
+++ b/docs/netbooting.txt
@@ -3,8 +3,11 @@ How to netboot using ELILO
 
 Copyright (C) 2002-2003 Hewlett-Packard Co.
 Contributed by Stephane Eranian <eranian@hpl.hp.com>
+Updated by Jason Fleischli <jason.fleischli@hp.com>
 
-Last updated: 03/08/11
+Last updated: 10/19/2009
+
+x86_64 and uefi support was added @ elilo version 3.8 and linux kernel >= 2.6.24
 
 EFI has full support for the PXE and DHCP protocol. As such 
 it is relatively easy to boot a machine from the network using EFI.
@@ -126,7 +129,7 @@ only on two very common cases:
 
           This filename is an opportunity to specify a machine specific configuration file.
 
-       2) AA[BB[CC]][-ia32|ia64].conf 
+       2) AA[BB[CC]][-ia32|ia64|x86_64].conf 
            As of version 3.5, elilo will also look for IPv4 class A,B,C
            subnet-specific versions of the config file.  This is useful when you
            want to have a common config file for all machines connected to a
@@ -140,14 +143,14 @@ only on two very common cases:
            config files first (So for example, on an Itanium system,
            "0A0000-ia64.conf" will be tried before "0A0000.conf")
 
-       3) elilo-ia32.config or elilo-ia64.conf
+       3) elilo-ia32.conf, elilo-x86_64.conf, or elilo-ia64.conf
           
-          Depending on the machine (client side) architecture elilo will try the IA-32 or
-          IA-64 file.
+          Depending on the machine (client side) architecture elilo will try the matching
+          architecture specific  filename.
 
           This filename is an opportunity to specify a architecture specific configuration file.
           This distinction between the architectures is useful when the same TFTP server services
-          the two types of clients : IA32- and IA-64 machines.
+          the three types of clients : ia32, x86_64, and ia64 machines.
 
         4) elilo.conf
 
@@ -244,7 +247,7 @@ only on two very common cases:
 
        - use the name provide by the PXE server Layer 1 or
 
-       - elilo-ia64.conf/elilo-ia32.conf or
+       - elilo-ia64.conf/elilo-ia32.conf/elilo-x86_64 or
 
        - elilo.conf
 
@@ -390,7 +393,7 @@ only on two very common cases:
 
 
  In the case of a DHCP boot, this type of customization makes sense only for
- the shared configuration file, elilo-ia64.conf/elilo-ia32.conf or elilo.conf.
+ the shared configuration file, elilo-ia64.conf/elilo-ia32.conf/elilo-x86_64 or elilo.conf.
  The configuration file based on the IP address (such as C0A80205.conf in this
  case) would provide another way of customizing parameters for a specific
  client (IP address). The same thing holds if the name of the config file