Merge commit 'upstream/4.6.1'

[debian/atlc] / src / non_gui / fill_image_vector_for_create_bmp_for_microstrip_coupler.c

diff --git a/src/non_gui/fill_image_vector_for_create_bmp_for_microstrip_coupler.c b/src/non_gui/fill_image_vector_for_create_bmp_for_microstrip_coupler.c
deleted file mode 100644 (file)
index d62fcf4..0000000
--- a/src/non_gui/fill_image_vector_for_create_bmp_for_microstrip_coupler.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* atlc - arbitrary transmission line calculator, for the analysis of
-transmission lines are directional couplers. 
-
-Copyright (C) 2002. Dr. David Kirkby, PhD (G8WRB).
-
-This program is free software; you can redistribute it and/or
-modify it under the terms of the GNU General Public License
-as published by the Free Software Foundation; either package_version 2
-of the License, or (at your option) any later package_version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307,
-USA.
-
-Dr. David Kirkby, e-mail drkirkby at ntlworld.com 
-
-*/
-#include "config.h"
-
-#ifdef HAVE_STRING_H
-#include <string.h>
-#endif
-
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif  
-
-#include "definitions.h"
-
-void fill_image_vector_with_data(unsigned char *image_vector, int colour_Er1, int colour_Er2, struct transmission_line_properties pcb)
-{
-   int i, j, red=0, green=0, blue=0, vector_original=0;
-   int right_edge_of_LH_GP;
-   for(j=0;j<pcb.H;++j)
-   {
-      for(i=0;i<pcb.W; ++i)
-      {
-
-        red=colour_Er1/(256*256); /* Fill whole region with Er1 (normally vacuum/air)*/
-        green=colour_Er1/256;
-        blue=colour_Er1%256;
-
-        /* Put a small border in green. Only one pixel is needed, but
-        I'll put a few more. */
-         if( (i<BORDER) || (i>pcb.W-BORDER-1) || (j<BORDER) || (j>pcb.H-BORDER-1))
-        {
-           red=0x00;
-           green=0xff;
-           blue=0x00;
-         }
-
-        /* Put the dielectric for the PCB in */
-        if((i >= BORDER) && (i <pcb.W-BORDER ) && (j >= BORDER) && (j < pcb.h+BORDER))
-        {
-          red=colour_Er2/(256*256); /* Fill in areas with Er2 (normally PCB substrate)*/
-          green=colour_Er2/256;
-          blue=colour_Er2%256;
-        }
-
-        /* Put the metal top LH surface of the PCB groundplane */
-        right_edge_of_LH_GP=(pcb.W/2-pcb.s/2-pcb.w-pcb.g)-BORDER;
-        if((i >= BORDER) && (i <=right_edge_of_LH_GP ) && (j >= pcb.h+BORDER) && (j < pcb.h+pcb.t+BORDER))
-        {
-          red=0; /* Fill in left hand groundplane on top of pcb */ 
-          green=255;
-          blue=0;
-        }
-        /* Left hand coupler, could be +1 V or -1 V it does not matter, as long as right one is opposite */
-        if( (i > right_edge_of_LH_GP + pcb.g ) && (i <= right_edge_of_LH_GP + pcb.g+pcb.w) && (j >= pcb.h+BORDER) && (j < pcb.h+pcb.t+BORDER))
-        {
-          red=0xff;  /* Left hand coupler made to be +1 V */
-          green=0;
-          blue=0;
-        }
-        /* Right and coupler, set to -1 V */
-        if( (i > right_edge_of_LH_GP + pcb.g +pcb.w+pcb.s) && (i <= right_edge_of_LH_GP + pcb.g+pcb.w+pcb.s+pcb.w) && (j >= pcb.h+BORDER) && (j < pcb.h+pcb.t+BORDER))
-        {
-          red=0;  /* Right hand coupler made to be -1 V */
-          green=0;
-          blue=0xff;
-         }
-        if( (i > right_edge_of_LH_GP + pcb.g+pcb.w+pcb.s+pcb.w+pcb.g) && (i <= pcb.W-BORDER) && (j >= pcb.h+BORDER) && (j < pcb.h+pcb.t+BORDER))
-        {
-          red=0;  /* Right hand ground plane in place */
-          green=0xff;
-          blue=0;
-         }
-        image_vector[vector_original]=blue;
-        image_vector[vector_original+1]=green;
-        image_vector[vector_original+2]=red;
-         vector_original+=3;
-      }
-   }
-}