if ($template_only==0){ # check $template mode
$mylabelprefix=$labelstr; #set labelstr
if ($tapedev eq "$def_tapedev/$config"){
- &create_deftapedir;
+ &create_deftapedir;
}
else {
- $tapedev=~/^(file:\/)/;
- $parentdir=$';
+ $parentdir=$tapedev;
}
}
else {
for $i (1..$tp_cyclelimit) {
unless ( -e "slot$i"){
- mkpath ("slot$i", $def_perm) ||
- ( &mprint ("WARNING: mkpath $parentdir/slot$i failed: $!\n"), $vtape_err++, return);
+ mkpath ("slot$i", $def_perm) ||
+ ( &mprint ("WARNING: mkpath $parentdir/slot$i failed: $!\n"), $vtape_err++, return);
}
( @amlabel_out = `$sbindir/amlabel -f $config $mylabelprefix-$i slot $i`) ||
- ( &mprint ("WARNING: amlabel vtapes failed at slot $i: $!\n"), $vtape_err++, return);
+ ( &mprint ("WARNING: amlabel vtapes failed at slot $i: $!\n"), $vtape_err++, return);
}
foreach (@amlabel_out) {
print LOG;
$labelstr="^$config-[0-9][0-9]*\$";
}
}
+
+ open (CONF, ">$confdir/$config/amanda.conf") ||
+ &log_and_die ("ERROR: Cannot create amanda.conf file: $!\n", 1);
+ chmod ($amanda_conf_perm, "$confdir/$config/amanda.conf") ||
+ &log_and_die ("ERROR: Cannot set amanda.conf file access permission: $!\n", 1);
+
+ print CONF "org \"$config\"\t\t# your organization name for reports\n";
+ print CONF "dumpuser \"$dumpuser\"\t# the user to run dumps under\n";
+ print CONF "mailto \"$mailto\"\t# space separated list of operators at your site\n";
+ print CONF "dumpcycle $dumpcycle\t\t# the number of days in the normal dump cycle\n";
+ print CONF "runspercycle $runspercycle\t\t# the number of amdump runs in dumpcycle days\n";
+ print CONF "tapecycle $tapecycle\t# the number of tapes in rotation\n";
+ print CONF "runtapes $runtapes\t\t# number of tapes to be used in a single run of amdump\n";
+
if ((!(defined($template)))||($template eq "harddisk"))
{
- if (defined $tapedev){
- $tapedev="file:/".$tapedev;
- }
- unless ( $tpchanger ) { $tpchanger="chg-disk"; }
- unless ( $tapedev ) { $tapedev="$def_tapedev/$config"; }
- unless ( $changerfile ) { $changerfile="$confdir/$config/changer.conf"; }
- unless ( $changerdev ) { $changerdev="/dev/null";}
+ print CONF "\n";
+ print CONF "define changer my_vtapes {\n";
+ print CONF " tpchanger \"chg-disk:$tapedev\"\n";
+ print CONF " property \"num-slot\" \"10\"\n";
+ print CONF " property \"auto-create-slot\" \"yes\"\n";
+ print CONF "}\n";
+ print CONF "tpchanger \"my_vtapes\"\n\n";
unless ( $tapetype ) { $tapetype="HARDDISK"; }
}
elsif ($template eq "single-tape")
{
- unless ($tpchanger) {$tpchanger="chg-manual";}
- unless ($tapedev) {$tapedev="/dev/nst0";}
- unless ($changerfile) {$changerfile="$confdir/$config/chg-manual.conf";}
- unless ($changerdev) {$changerdev="/dev/null";}
+ print CONF "\n";
+ print CONF "define changer my_single {\n";
+ print CONF " tpchanger \"chg-single:$tapedev\"\n";
+ print CONF "}\n";
+ print CONF "tpchanger \"my_single\"\n\n";
unless ($tapetype) {$tapetype="HP-DAT";}
}
elsif ($template eq "tape-changer")
{
- unless ($tpchanger){$tpchanger="chg-zd-mtx";}
- unless ($tapedev){ $tapedev="/dev/nst0";}
- unless ($changerfile){$changerfile="$confdir/$config/changer.conf";}
- unless ($changerdev) {$changerdev="/dev/sg1";}
+ print CONF "\n";
+ print CONF "define changer my_robot {\n";
+ print CONF " tpchanger \"chg-robot:$changerdev\"\n";
+ print CONF " property \"tape-device\" \"0=$tapedev\"\n";
+ print CONF "}\n";
+ print CONF "tpchanger \"my_robot\"\n\n";
unless ($tapetype) {$tapetype="HP-DAT";}
}
else # S3 case
{
- unless ($tpchanger){$tpchanger="chg-multi";}
- unless ($changerfile){$changerfile="$confdir/$config/changer.conf";}
+ print CONF "\n";
+ print CONF "define changer my_s3 {\n";
+ print CONF " tpchanger \"chg-multi:$tapedev\"\n";
+ print CONF " device-property \"S3_ACCESS_KEY\" \"\"\n";
+ print CONF " device-property \"S3_SECRET_KEY\" \"\"\n";
+ print CONF " device-property \"NB_THREADS_BACKUP\" \"\"\n";
+ print CONF "}\n";
+ print CONF "tpchanger \"my_s3\"\n\n";
unless ($tapetype) {$tapetype="HP-DAT";}
}
-
- open (CONF, ">$confdir/$config/amanda.conf") ||
- &log_and_die ("ERROR: Cannot create amanda.conf file: $!\n", 1);
- chmod ($amanda_conf_perm, "$confdir/$config/amanda.conf") ||
- &log_and_die ("ERROR: Cannot set amanda.conf file access permission: $!\n", 1);
-
- print CONF "org \"$config\"\t\t# your organization name for reports\n";
- print CONF "dumpuser \"$dumpuser\"\t# the user to run dumps under\n";
- print CONF "mailto \"$mailto\"\t# space separated list of operators at your site\n";
- print CONF "dumpcycle $dumpcycle\t\t# the number of days in the normal dump cycle\n";
- print CONF "runspercycle $runspercycle\t\t# the number of amdump runs in dumpcycle days\n";
- print CONF "tapecycle $tapecycle\t# the number of tapes in rotation\n";
- print CONF "runtapes $runtapes\t\t# number of tapes to be used in a single run of amdump\n";
- print CONF "tpchanger \"$tpchanger\"\t# the tape-changer glue script\n";
- print CONF "tapedev \"$tapedev\"\t# the no-rewind tape device\n";
- print CONF "changerfile \"$changerfile\"\t# tape changer configuration parameter file\n";
- print CONF "changerdev \"$changerdev\"\t# tape changer configuration parameter device\n";
print CONF "tapetype $tapetype\t# what kind of tape it is\n";
print CONF "labelstr \"$labelstr\"\t# label constraint regex: all tapes must match\n";
print CONF "dtimeout $def_dtimeout\t# number of idle seconds before a dump is aborted\n";
projects / debian / amanda / blobdiff