Imported Upstream version 2.5.0

[debian/amanda] / man / amtape.8

diff --git a/man/amtape.8 b/man/amtape.8
index 1741d4f74bbba2d227f876b73cd9a73245eac665..4ff969f82ab4829d812a9fafb8f413105ead8757 100644 (file)
--- a/man/amtape.8
+++ b/man/amtape.8
@@ -19,7 +19,7 @@
 ..
 .TH "AMTAPE" 8 "" "" ""
 .SH NAME
-amtape \- user interface to AMANDA tape changer controls
+amtape \- user interface to Amanda tape changer controls
 .SH "SYNOPSIS"
 .ad l
 .hy 0
@@ -31,19 +31,19 @@ amtape \- user interface to AMANDA tape changer controls
 .SH "DESCRIPTION"
 
 .PP
-\fBAmtape\fR performs tape changer control operations\&. It uses the underlying tape changer script defined by the \fBtpchanger\fR option for a particular \fBAMANDA\fR configuration as specified by the \fBconfig\fR argument\&.
+\fBAmtape\fR performs tape changer control operations\&. It uses the underlying tape changer script defined by the \fBtpchanger\fR option for a particular \fBAmanda\fR configuration as specified by the \fBconfig\fR argument\&.
 
 .PP
 Tape changers maintain a notion of the \fBcurrent\fR and \fBnext\fR slot for each configuration\&. These may or may not correspond to an actual physical state of the device, but do tend to minimize searching through the tape storage slots\&. If the desired tape is in the current slot, it is likely the next tape needed is in the next slot rather than at some random position in the storage slots\&.
 
 .PP
-See the \fBamanda\fR(8) man page for more details about \fBAMANDA\fR\&.
+See the \fBamanda\fR(8) man page for more details about \fBAmanda\fR\&.
 
 .SH "COMMANDS"
 
 .TP
 \fBreset\fR
-Reset the tape changer to a known state\&. The \fBcurrent\fR slot is set to the \fBfirst\fR slot\&. Other device\-specific side effects may occur\&. Some gravity stackers need to be reset to the top position by hand\&. This command notifies \fBAMANDA\fR the stacker is back in that position\&.
+Reset the tape changer to a known state\&. The \fBcurrent\fR slot is set to the \fBfirst\fR slot\&. Other device\-specific side effects may occur\&. Some gravity stackers need to be reset to the top position by hand\&. This command notifies \fBAmanda\fR the stacker is back in that position\&.
 
 .TP
 \fBeject\fR
@@ -59,7 +59,7 @@ Show the contents of all slots\&. This can be slow\&.
 
 .TP
 \fBlabel\fR \fBlabel\fR
-Search for and load the \fBAMANDA\fR tape with label \fBlabel\fR\&.
+Search for and load the \fBAmanda\fR tape with label \fBlabel\fR\&.
 
 .TP
 \fBtaper\fR
@@ -106,7 +106,7 @@ Eject any tape in the drive and put it away, then load the tape from the last sl
 Eject any tape in the drive and put it away\&. Advance \fBcurrent\fR to the next tape, but do not load it\&.
 
 .PP
-This is useful with non\-gravity stackers to unload the last tape used and set up \fBAMANDA\fR for the next run\&. If you just use \fBeject\fR, the current tape will be mounted again in the next run, where it will be rejected as being still in use, ejected and the next tape requested\&. Using \fBslot next\fR followed by \fBeject\fR does an unnecessary mount\&.
+This is useful with non\-gravity stackers to unload the last tape used and set up \fBAmanda\fR for the next run\&. If you just use \fBeject\fR, the current tape will be mounted again in the next run, where it will be rejected as being still in use, ejected and the next tape requested\&. Using \fBslot next\fR followed by \fBeject\fR does an unnecessary mount\&.
 
 .PP
 Note: most changers optimize the \fBslot\fR commands to not eject the loaded tape if it is the one being requested\&.
@@ -117,7 +117,7 @@ Note: most changers optimize the \fBslot\fR commands to not eject the loaded tap
 James da Silva, <jds@amanda\&.org> : Original text
 
 .PP
-Stefan G\&. Weichinger, <sgw@amanda\&.org>, maintainer of the \fBAMANDA\fR\-documentation: XML\-conversion
+Stefan G\&. Weichinger, <sgw@amanda\&.org>, maintainer of the \fBAmanda\fR\-documentation: XML\-conversion
 
 .SH "SEE ALSO"