# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
-use Test::More tests => 176;
+use Test::More tests => 204;
use strict;
+use warnings;
+use Data::Dumper;
use lib "@amperldir@";
use Installcheck::Config;
use Amanda::Paths;
use Amanda::Tests;
-use Amanda::Config qw( :init :getconf string_to_boolean );
+use Amanda::Config qw( :init :getconf string_to_boolean amandaify_property_name );
use Amanda::Debug;
my $testconf;
# Check out error handling
$testconf = Installcheck::Config->new();
-$testconf->add_param('tapebufs', '13'); # a deprecated keyword -> warning
+$testconf->add_param('label_new_tapes', '"xx"'); # a deprecated keyword -> warning
$testconf->write();
{
$testconf->add_client_param('property', '"client-prop" "yep"');
$testconf->add_client_param('property', 'priority "clIent-prop1" "foo"');
$testconf->add_client_param('property', 'append "clieNt-prop" "bar"');
+$testconf->add_client_param('property', '"ANotHer_prOp" "baz"');
+$testconf->add_client_param('property', 'append "ANOTHER-prop" "boo"');
$testconf->write();
my $cfg_result = config_init($CONFIG_INIT_CLIENT, undef);
values => [ "foo" ]},
"client-prop" => { priority => 0,
append => 1,
- values => [ "yep", "bar" ] }},
+ values => [ "yep", "bar" ] },
+ "another-prop" => { priority => 0,
+ append => 1,
+ values => [ "baz", "boo" ] }},
"Client PROPERTY parameter parsed correctly");
##
$testconf->add_tapetype('mytapetype', [
'comment' => '"mine"',
'length' => '128 M',
+ 'part_size' => '100M',
+ 'part_cache_type' => 'disk',
+ 'part_cache_dir' => '"/usr/bin"',
+ 'part_cache_max_size' => '50M',
]);
$testconf->add_dumptype('mydump-type', [ # note dash
'comment' => '"mine"',
'include file optional' => '"rhyme"',
'property' => '"prop" "erty"',
'property' => '"DROP" "qwerty" "asdfg"',
- 'estimate' => 'server calcsize client'
+ 'estimate' => 'server calcsize client',
+ 'allow_split' => 'no',
+ 'allow_split' => 'no',
]);
$testconf->add_dumptype('second_dumptype', [ # note underscore
'' => 'mydump-type',
$testconf->add_dumptype('third_dumptype', [
'' => 'second_dumptype',
'comment' => '"refers to second_dumptype with an underscore"',
+ 'recovery-limit' => '"left" same-host "right"',
]);
$testconf->add_interface('ethernet', [
'comment' => '"mine"',
'comment' => '"my device is mine, not yours"',
'tapedev' => '"tape:/dev/nst0"',
'device_property' => '"BLOCK_SIZE" "128k"',
+ 'device_property' => '"CoMmENT" "what up?"',
]);
$testconf->add_changer('my_changer', [
'comment' => '"my changer is mine, not yours"',
$testconf->write();
$cfg_result = config_init($CONFIG_INIT_EXPLICIT_NAME, 'TESTCONF');
-is($cfg_result, $CFGERR_OK,
- "Load test configuration")
- or diag_config_errors();
-
-SKIP: {
- skip "error loading config", 3 unless $cfg_result == $CFGERR_OK;
-
- is(Amanda::Config::get_config_name(), "TESTCONF",
- "config_name set");
- is(Amanda::Config::get_config_dir(), "$CONFIG_DIR/TESTCONF",
- "config_dir set");
- is(Amanda::Config::get_config_filename(),
- "$CONFIG_DIR/TESTCONF/amanda.conf",
- "config_filename set");
-}
-
-SKIP: { # global parameters
- skip "error loading config", 13 unless $cfg_result == $CFGERR_OK;
-
- is(getconf($CNF_RESERVE), 75,
- "integer global confparm");
- is(getconf($CNF_BUMPSIZE), $int64_num+0,
- "int64 global confparm");
- is(getconf($CNF_TAPEDEV), "/dev/foo",
- "string global confparm");
- is(getconf($CNF_DEVICE_OUTPUT_BUFFER_SIZE), $size_t_num+0,
- "size global confparm");
- ok(getconf($CNF_AUTOFLUSH),
- "boolean global confparm");
- is(getconf($CNF_USETIMESTAMPS), 0,
- "boolean global confparm, passing an integer (0)");
- is(getconf($CNF_TAPERALGO), $Amanda::Config::ALGO_LAST,
- "taperalgo global confparam");
- is_deeply([getconf($CNF_RESERVED_UDP_PORT)], [100,200],
- "intrange global confparm");
- is(getconf($CNF_DISPLAYUNIT), "M",
- "displayunit is correctly uppercased");
- is_deeply(getconf($CNF_DEVICE_PROPERTY),
- { "foo" => { priority => 0, append => 0, values => ["bar"]},
- "blue" => { priority => 0, append => 0,
- values => ["car", "tar"]} },
- "proplist global confparm");
- is_deeply(getconf($CNF_AUTOLABEL),
- { template => undef, other_config => '',
- non_amanda => 1, volume_error => '', empty => 1 },
- "'autolabel non-amanda empty' represented correctly");
- ok(getconf_seen($CNF_TAPEDEV),
- "'tapedev' parm was seen");
- ok(!getconf_seen($CNF_CHANGERFILE),
- "'changerfile' parm was not seen");
-}
-
-SKIP: { # derived values
- skip "error loading config", 3 unless $cfg_result == $CFGERR_OK;
-
- is(Amanda::Config::getconf_unit_divisor(), 1024,
- "correct unit divisor (from displayunit -> KB)");
- ok($Amanda::Config::debug_auth,
- "debug_auth setting reflected in global variable");
- ok(!$Amanda::Config::debug_amandad,
- "debug_amandad defaults to false");
-}
-
-SKIP: { # tapetypes
- skip "error loading config", 6 unless $cfg_result == $CFGERR_OK;
- my $ttyp = lookup_tapetype("mytapetype");
- ok($ttyp, "found mytapetype");
- is(tapetype_getconf($ttyp, $TAPETYPE_COMMENT), 'mine',
- "tapetype comment");
- is(tapetype_getconf($ttyp, $TAPETYPE_LENGTH), 128 * 1024,
- "tapetype comment");
-
- ok(tapetype_seen($ttyp, $TAPETYPE_COMMENT),
- "tapetype comment was seen");
- ok(!tapetype_seen($ttyp, $TAPETYPE_LBL_TEMPL),
- "tapetype lbl_templ was not seen");
-
- is_deeply([ sort(+getconf_list("tapetype")) ],
- [ sort("mytapetype", "TEST-TAPE") ],
- "getconf_list lists all tapetypes");
-}
-
-SKIP: { # dumptypes
- skip "error loading config", 18 unless $cfg_result == $CFGERR_OK;
-
- my $dtyp = lookup_dumptype("mydump-type");
- ok($dtyp, "found mydump-type");
- is(dumptype_getconf($dtyp, $DUMPTYPE_COMMENT), 'mine',
- "dumptype string");
- is(dumptype_getconf($dtyp, $DUMPTYPE_PRIORITY), 2,
- "dumptype priority");
- is(dumptype_getconf($dtyp, $DUMPTYPE_BUMPSIZE), $int64_num+0,
- "dumptype size");
- is(dumptype_getconf($dtyp, $DUMPTYPE_BUMPMULT), 1.75,
- "dumptype real");
- is(dumptype_getconf($dtyp, $DUMPTYPE_STARTTIME), 1829,
- "dumptype time");
- is(dumptype_getconf($dtyp, $DUMPTYPE_HOLDINGDISK), $HOLD_REQUIRED,
- "dumptype holdingdisk");
- is(dumptype_getconf($dtyp, $DUMPTYPE_COMPRESS), $COMP_BEST,
- "dumptype compress");
- is(dumptype_getconf($dtyp, $DUMPTYPE_ENCRYPT), $ENCRYPT_SERV_CUST,
- "dumptype encrypt");
- is(dumptype_getconf($dtyp, $DUMPTYPE_STRATEGY), $DS_INCRONLY,
- "dumptype strategy");
- is_deeply([dumptype_getconf($dtyp, $DUMPTYPE_COMPRATE)], [0.25, 0.75],
- "dumptype comprate");
- is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_INCLUDE),
- { 'file' => [ 'rhyme' ],
- 'list' => [ 'bing', 'ting', 'string', 'fling' ],
- 'optional' => 1 },
- "dumptype include list");
- is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_EXCLUDE),
- { 'file' => [ 'foolist' ],
- 'list' => [ 'foo', 'bar', 'true', 'star' ],
- 'optional' => 0 },
- "dumptype exclude list");
- is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_ESTIMATELIST),
- [ $ES_SERVER, $ES_CALCSIZE, $ES_CLIENT ],
- "dumptype estimate list");
- is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_PROPERTY),
- { "prop" => { priority => 0, append => 0, values => ["erty"]},
- "drop" => { priority => 0, append => 0,
- values => ["qwerty", "asdfg"] }},
- "dumptype proplist");
-
- ok(dumptype_seen($dtyp, $DUMPTYPE_EXCLUDE),
- "'exclude' parm was seen");
- ok(!dumptype_seen($dtyp, $DUMPTYPE_RECORD),
- "'record' parm was not seen");
-
- is_deeply([ sort(+getconf_list("dumptype")) ],
- [ sort(qw(
- mydump-type second_dumptype third_dumptype
- NO-COMPRESS COMPRESS-FAST COMPRESS-BEST COMPRESS-CUST
- SRVCOMPRESS BSD-AUTH NO-RECORD NO-HOLD
- NO-FULL
- )) ],
- "getconf_list lists all dumptypes (including defaults)");
-}
-
-SKIP: { # interfaces
- skip "error loading config", 8 unless $cfg_result == $CFGERR_OK;
- my $iface = lookup_interface("ethernet");
- ok($iface, "found ethernet");
- is(interface_name($iface), "ethernet",
- "interface knows its name");
- is(interface_getconf($iface, $INTER_COMMENT), 'mine',
- "interface comment");
- is(interface_getconf($iface, $INTER_MAXUSAGE), 100,
- "interface maxusage");
-
- $iface = lookup_interface("nic");
- ok($iface, "found nic");
- ok(interface_seen($iface, $INTER_COMMENT),
- "seen set for parameters that appeared");
- ok(!interface_seen($iface, $INTER_MAXUSAGE),
- "seen not set for parameters that did not appear");
-
- is_deeply([ sort(+getconf_list("interface")) ],
- [ sort('ethernet', 'nic', 'default') ],
- "getconf_list lists all interfaces (in any order)");
-}
-
-SKIP: { # holdingdisks
- skip "error loading config", 13 unless $cfg_result == $CFGERR_OK;
- my $hdisk = lookup_holdingdisk("hd1");
- ok($hdisk, "found hd1");
- is(holdingdisk_name($hdisk), "hd1",
- "hd1 knows its name");
- is(holdingdisk_getconf($hdisk, $HOLDING_COMMENT), 'mine',
- "holdingdisk comment");
- is(holdingdisk_getconf($hdisk, $HOLDING_DISKDIR), '/mnt/hd1',
- "holdingdisk diskdir (directory)");
- is(holdingdisk_getconf($hdisk, $HOLDING_DISKSIZE), 100*1024,
- "holdingdisk disksize (use)");
- is(holdingdisk_getconf($hdisk, $HOLDING_CHUNKSIZE), 1024,
- "holdingdisk chunksize");
-
- $hdisk = lookup_holdingdisk("hd2");
- ok($hdisk, "found hd2");
- ok(holdingdisk_seen($hdisk, $HOLDING_COMMENT),
- "seen set for parameters that appeared");
- ok(!holdingdisk_seen($hdisk, $HOLDING_CHUNKSIZE),
- "seen not set for parameters that did not appear");
-
- # only holdingdisks have this linked-list structure
- # exposed
- my $hdisklist = getconf($CNF_HOLDINGDISK);
- my $first_disk = @$hdisklist[0];
- $hdisk = lookup_holdingdisk($first_disk);
- like(holdingdisk_name($hdisk), qr/hd[12]/,
- "one disk is first in list of holdingdisks");
- $hdisk = lookup_holdingdisk(@$hdisklist[1]);
- like(holdingdisk_name($hdisk), qr/hd[12]/,
- "another is second in list of holdingdisks");
- ok($#$hdisklist == 1,
- "no third holding disk");
-
- is_deeply([ sort(+getconf_list("holdingdisk")) ],
- [ sort('hd1', 'hd2') ],
- "getconf_list lists all holdingdisks (in any order)");
-}
-
-SKIP: { # application
- skip "error loading config", 5 unless $cfg_result == $CFGERR_OK;
- my $app = lookup_application("my_app");
- ok($app, "found my_app");
- is(application_name($app), "my_app",
- "my_app knows its name");
- is(application_getconf($app, $APPLICATION_COMMENT), 'my_app_comment',
- "application comment");
- is(application_getconf($app, $APPLICATION_PLUGIN), 'amgtar',
- "application plugin (amgtar)");
-
- is_deeply([ sort(+getconf_list("application-tool")) ],
- [ sort("my_app") ],
- "getconf_list lists all applications");
- # test backward compatibility
- is_deeply([ sort(+getconf_list("application")) ],
- [ sort("my_app") ],
- "getconf_list works for 'application-tool', too");
-}
-
-SKIP: { # script
- skip "error loading config", 7 unless $cfg_result == $CFGERR_OK;
- my $sc = lookup_pp_script("my_script");
- ok($sc, "found my_script");
- is(pp_script_name($sc), "my_script",
- "my_script knows its name");
- is(pp_script_getconf($sc, $PP_SCRIPT_COMMENT), 'my_script_comment',
- "script comment");
- is(pp_script_getconf($sc, $PP_SCRIPT_PLUGIN), 'script-email',
- "script plugin (script-email)");
- is(pp_script_getconf($sc, $PP_SCRIPT_EXECUTE_WHERE), $ES_CLIENT,
- "script execute_where (client)");
- is(pp_script_getconf($sc, $PP_SCRIPT_EXECUTE_ON),
- $EXECUTE_ON_PRE_HOST_BACKUP|$EXECUTE_ON_POST_HOST_BACKUP,
- "script execute_on");
-
- is_deeply([ sort(+getconf_list("script")) ],
- [ sort("my_script") ],
- "getconf_list lists all script");
-
- is_deeply([ sort(+getconf_list("script-tool")) ],
- [ sort("my_script") ],
- "getconf_list works for 'script-tool', too");
+if (!is($cfg_result, $CFGERR_OK,
+ "Load test configuration")) {
+ diag_config_errors();
+ die "aborting after config errors";
}
-SKIP: { # device
- skip "error loading config", 6 unless $cfg_result == $CFGERR_OK;
- my $dc = lookup_device_config("my_device");
- ok($dc, "found my_device");
- is(device_config_name($dc), "my_device",
- "my_device knows its name");
- is(device_config_getconf($dc, $DEVICE_CONFIG_COMMENT), 'my device is mine, not yours',
- "device comment");
- is(device_config_getconf($dc, $DEVICE_CONFIG_TAPEDEV), 'tape:/dev/nst0',
- "device tapedev");
- # TODO do we really need all of this equipment for device properties?
- is_deeply(device_config_getconf($dc, $DEVICE_CONFIG_DEVICE_PROPERTY),
- { "block_size" => { 'priority' => 0, 'values' => ["128k"], 'append' => 0 }, },
- "device config proplist");
-
- is_deeply([ sort(+getconf_list("device")) ],
- [ sort("my_device") ],
- "getconf_list lists all devices");
-}
-
-SKIP: { # changer
- skip "error loading config", 7 unless $cfg_result == $CFGERR_OK;
- my $dc = lookup_changer_config("my_changer");
- ok($dc, "found my_changer");
- is(changer_config_name($dc), "my_changer",
- "my_changer knows its name");
- is(changer_config_getconf($dc, $CHANGER_CONFIG_COMMENT), 'my changer is mine, not yours',
- "changer comment");
- is(changer_config_getconf($dc, $CHANGER_CONFIG_CHANGERDEV), '/dev/sg0',
- "changer tapedev");
- is_deeply(changer_config_getconf($dc, $CHANGER_CONFIG_PROPERTY),
- { 'testprop' => {
- 'priority' => 0,
- 'values' => [ 'testval' ],
- 'append' => 0,
- }
- }, "changer properties represented correctly");
-
- is_deeply(changer_config_getconf($dc, $CHANGER_CONFIG_DEVICE_PROPERTY),
- { 'testdprop' => {
- 'priority' => 0,
- 'values' => [ 'testdval' ],
- 'append' => 0,
- }
- }, "changer device properties represented correctly");
-
- is_deeply([ sort(+getconf_list("changer")) ],
- [ sort("my_changer") ],
- "getconf_list lists all changers");
-}
+is(Amanda::Config::get_config_name(), "TESTCONF",
+ "config_name set");
+is(Amanda::Config::get_config_dir(), "$CONFIG_DIR/TESTCONF",
+ "config_dir set");
+is(Amanda::Config::get_config_filename(),
+ "$CONFIG_DIR/TESTCONF/amanda.conf",
+ "config_filename set");
+
+is(getconf($CNF_RESERVE), 75,
+ "integer global confparm");
+is(getconf($CNF_BUMPSIZE), $int64_num+0,
+ "int64 global confparm");
+is(getconf($CNF_TAPEDEV), "/dev/foo",
+ "string global confparm");
+is(getconf($CNF_DEVICE_OUTPUT_BUFFER_SIZE), $size_t_num+0,
+ "size global confparm");
+ok(getconf($CNF_AUTOFLUSH),
+ "boolean global confparm");
+is(getconf($CNF_USETIMESTAMPS), 0,
+ "boolean global confparm, passing an integer (0)");
+is(getconf($CNF_TAPERALGO), $Amanda::Config::ALGO_LAST,
+ "taperalgo global confparam");
+is_deeply([getconf($CNF_RESERVED_UDP_PORT)], [100,200],
+ "intrange global confparm");
+is(getconf($CNF_DISPLAYUNIT), "M",
+ "displayunit is correctly uppercased");
+is_deeply(getconf($CNF_DEVICE_PROPERTY),
+ { "foo" => { priority => 0, append => 0, values => ["bar"]},
+ "blue" => { priority => 0, append => 0,
+ values => ["car", "tar"]} },
+ "proplist global confparm");
+is_deeply(getconf($CNF_AUTOLABEL),
+ { template => undef, other_config => '',
+ non_amanda => 1, volume_error => '', empty => 1 },
+ "'autolabel non-amanda empty' represented correctly");
+ok(getconf_seen($CNF_TAPEDEV),
+ "'tapedev' parm was seen");
+ok(!getconf_seen($CNF_CHANGERFILE),
+ "'changerfile' parm was not seen");
+
+is(Amanda::Config::getconf_unit_divisor(), 1024,
+ "correct unit divisor (from displayunit -> KB)");
+ok($Amanda::Config::debug_auth,
+ "debug_auth setting reflected in global variable");
+ok(!$Amanda::Config::debug_amandad,
+ "debug_amandad defaults to false");
+
+my $ttyp = lookup_tapetype("mytapetype");
+ok($ttyp, "found mytapetype");
+is(tapetype_getconf($ttyp, $TAPETYPE_COMMENT), 'mine',
+ "tapetype comment");
+is(tapetype_getconf($ttyp, $TAPETYPE_LENGTH), 128 * 1024,
+ "tapetype comment");
+
+ok(tapetype_seen($ttyp, $TAPETYPE_COMMENT),
+ "tapetype comment was seen");
+ok(!tapetype_seen($ttyp, $TAPETYPE_LBL_TEMPL),
+ "tapetype lbl_templ was not seen");
+
+is(tapetype_getconf($ttyp, $TAPETYPE_PART_SIZE), 100*1024,
+ "tapetype part_size");
+is(tapetype_getconf($ttyp, $TAPETYPE_PART_CACHE_TYPE), $PART_CACHE_TYPE_DISK,
+ "tapetype part_cache_type");
+is(tapetype_getconf($ttyp, $TAPETYPE_PART_CACHE_DIR), "/usr/bin",
+ "tapetype part_cache_dir");
+is(tapetype_getconf($ttyp, $TAPETYPE_PART_CACHE_MAX_SIZE), 50*1024,
+ "tapetype part_cache_max_size");
+
+is_deeply([ sort(+getconf_list("tapetype")) ],
+ [ sort("mytapetype", "TEST-TAPE") ],
+ "getconf_list lists all tapetypes");
+
+my $dtyp = lookup_dumptype("mydump-type");
+ok($dtyp, "found mydump-type");
+is(dumptype_getconf($dtyp, $DUMPTYPE_COMMENT), 'mine',
+ "dumptype string");
+is(dumptype_getconf($dtyp, $DUMPTYPE_PRIORITY), 2,
+ "dumptype priority");
+is(dumptype_getconf($dtyp, $DUMPTYPE_BUMPSIZE), $int64_num+0,
+ "dumptype size");
+is(dumptype_getconf($dtyp, $DUMPTYPE_BUMPMULT), 1.75,
+ "dumptype real");
+is(dumptype_getconf($dtyp, $DUMPTYPE_STARTTIME), 1829,
+ "dumptype time");
+is(dumptype_getconf($dtyp, $DUMPTYPE_HOLDINGDISK), $HOLD_REQUIRED,
+ "dumptype holdingdisk");
+is(dumptype_getconf($dtyp, $DUMPTYPE_COMPRESS), $COMP_BEST,
+ "dumptype compress");
+is(dumptype_getconf($dtyp, $DUMPTYPE_ENCRYPT), $ENCRYPT_SERV_CUST,
+ "dumptype encrypt");
+is(dumptype_getconf($dtyp, $DUMPTYPE_STRATEGY), $DS_INCRONLY,
+ "dumptype strategy");
+is_deeply([dumptype_getconf($dtyp, $DUMPTYPE_COMPRATE)], [0.25, 0.75],
+ "dumptype comprate");
+is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_INCLUDE),
+ { 'file' => [ 'rhyme' ],
+ 'list' => [ 'bing', 'ting', 'string', 'fling' ],
+ 'optional' => 1 },
+ "dumptype include list");
+is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_EXCLUDE),
+ { 'file' => [ 'foolist' ],
+ 'list' => [ 'foo', 'bar', 'true', 'star' ],
+ 'optional' => 0 },
+ "dumptype exclude list");
+is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_ESTIMATELIST),
+ [ $ES_SERVER, $ES_CALCSIZE, $ES_CLIENT ],
+ "dumptype estimate list");
+is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_PROPERTY),
+ { "prop" => { priority => 0, append => 0, values => ["erty"]},
+ "drop" => { priority => 0, append => 0,
+ values => ["qwerty", "asdfg"] }},
+ "dumptype proplist");
+is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_RECOVERY_LIMIT),
+ [],
+ "dumptype recovery limit with no limit specified => empty");
+
+ok(dumptype_seen($dtyp, $DUMPTYPE_EXCLUDE),
+ "'exclude' parm was seen");
+ok(!dumptype_seen($dtyp, $DUMPTYPE_RECORD),
+ "'record' parm was not seen");
+
+is_deeply([ sort(+getconf_list("dumptype")) ],
+ [ sort(qw(
+ mydump-type second_dumptype third_dumptype
+ NO-COMPRESS COMPRESS-FAST COMPRESS-BEST COMPRESS-CUST
+ SRVCOMPRESS BSD-AUTH NO-RECORD NO-HOLD
+ NO-FULL
+ )) ],
+ "getconf_list lists all dumptypes (including defaults)");
+is(dumptype_getconf($dtyp, $DUMPTYPE_ALLOW_SPLIT), 0,
+ "dumptype allow_split");
+
+my $iface = lookup_interface("ethernet");
+ok($iface, "found ethernet");
+is(interface_name($iface), "ethernet",
+ "interface knows its name");
+is(interface_getconf($iface, $INTER_COMMENT), 'mine',
+ "interface comment");
+is(interface_getconf($iface, $INTER_MAXUSAGE), 100,
+ "interface maxusage");
+
+$iface = lookup_interface("nic");
+ok($iface, "found nic");
+ok(interface_seen($iface, $INTER_COMMENT),
+ "seen set for parameters that appeared");
+ok(!interface_seen($iface, $INTER_MAXUSAGE),
+ "seen not set for parameters that did not appear");
+
+is_deeply([ sort(+getconf_list("interface")) ],
+ [ sort('ethernet', 'nic', 'default') ],
+ "getconf_list lists all interfaces (in any order)");
+
+skip "error loading config", 13 unless $cfg_result == $CFGERR_OK;
+my $hdisk = lookup_holdingdisk("hd1");
+ok($hdisk, "found hd1");
+is(holdingdisk_name($hdisk), "hd1",
+ "hd1 knows its name");
+is(holdingdisk_getconf($hdisk, $HOLDING_COMMENT), 'mine',
+ "holdingdisk comment");
+is(holdingdisk_getconf($hdisk, $HOLDING_DISKDIR), '/mnt/hd1',
+ "holdingdisk diskdir (directory)");
+is(holdingdisk_getconf($hdisk, $HOLDING_DISKSIZE), 100*1024,
+ "holdingdisk disksize (use)");
+is(holdingdisk_getconf($hdisk, $HOLDING_CHUNKSIZE), 1024,
+ "holdingdisk chunksize");
+
+$hdisk = lookup_holdingdisk("hd2");
+ok($hdisk, "found hd2");
+ok(holdingdisk_seen($hdisk, $HOLDING_COMMENT),
+ "seen set for parameters that appeared");
+ok(!holdingdisk_seen($hdisk, $HOLDING_CHUNKSIZE),
+ "seen not set for parameters that did not appear");
+
+# only holdingdisks have this linked-list structure
+# exposed
+my $hdisklist = getconf($CNF_HOLDINGDISK);
+my $first_disk = @$hdisklist[0];
+$hdisk = lookup_holdingdisk($first_disk);
+like(holdingdisk_name($hdisk), qr/hd[12]/,
+ "one disk is first in list of holdingdisks");
+$hdisk = lookup_holdingdisk(@$hdisklist[1]);
+like(holdingdisk_name($hdisk), qr/hd[12]/,
+ "another is second in list of holdingdisks");
+ok($#$hdisklist == 1,
+ "no third holding disk");
+
+is_deeply([ sort(+getconf_list("holdingdisk")) ],
+ [ sort('hd1', 'hd2') ],
+ "getconf_list lists all holdingdisks (in any order)");
+
+skip "error loading config", 5 unless $cfg_result == $CFGERR_OK;
+my $app = lookup_application("my_app");
+ok($app, "found my_app");
+is(application_name($app), "my_app",
+ "my_app knows its name");
+is(application_getconf($app, $APPLICATION_COMMENT), 'my_app_comment',
+ "application comment");
+is(application_getconf($app, $APPLICATION_PLUGIN), 'amgtar',
+ "application plugin (amgtar)");
+
+is_deeply([ sort(+getconf_list("application-tool")) ],
+ [ sort("my_app") ],
+ "getconf_list lists all applications");
+# test backward compatibility
+is_deeply([ sort(+getconf_list("application")) ],
+ [ sort("my_app") ],
+ "getconf_list works for 'application-tool', too");
+
+my $sc = lookup_pp_script("my_script");
+ok($sc, "found my_script");
+is(pp_script_name($sc), "my_script",
+ "my_script knows its name");
+is(pp_script_getconf($sc, $PP_SCRIPT_COMMENT), 'my_script_comment',
+ "script comment");
+is(pp_script_getconf($sc, $PP_SCRIPT_PLUGIN), 'script-email',
+ "script plugin (script-email)");
+is(pp_script_getconf($sc, $PP_SCRIPT_EXECUTE_WHERE), $ES_CLIENT,
+ "script execute_where (client)");
+is(pp_script_getconf($sc, $PP_SCRIPT_EXECUTE_ON),
+ $EXECUTE_ON_PRE_HOST_BACKUP|$EXECUTE_ON_POST_HOST_BACKUP,
+ "script execute_on");
+
+is_deeply([ sort(+getconf_list("script")) ],
+ [ sort("my_script") ],
+ "getconf_list lists all script");
+
+is_deeply([ sort(+getconf_list("script-tool")) ],
+ [ sort("my_script") ],
+ "getconf_list works for 'script-tool', too");
+
+my $dc = lookup_device_config("my_device");
+ok($dc, "found my_device");
+is(device_config_name($dc), "my_device",
+ "my_device knows its name");
+is(device_config_getconf($dc, $DEVICE_CONFIG_COMMENT), 'my device is mine, not yours',
+ "device comment");
+is(device_config_getconf($dc, $DEVICE_CONFIG_TAPEDEV), 'tape:/dev/nst0',
+ "device tapedev");
+# TODO do we really need all of this equipment for device properties?
+is_deeply(device_config_getconf($dc, $DEVICE_CONFIG_DEVICE_PROPERTY),
+ { "block-size" => { 'priority' => 0, 'values' => ["128k"], 'append' => 0 },
+ "comment" => { 'priority' => 0, 'values' => ["what up?"], 'append' => 0 }, },
+ "device config proplist");
+
+is_deeply([ sort(+getconf_list("device")) ],
+ [ sort("my_device") ],
+ "getconf_list lists all devices");
+
+skip "error loading config", 7 unless $cfg_result == $CFGERR_OK;
+$dc = lookup_changer_config("my_changer");
+ok($dc, "found my_changer");
+is(changer_config_name($dc), "my_changer",
+ "my_changer knows its name");
+is(changer_config_getconf($dc, $CHANGER_CONFIG_COMMENT), 'my changer is mine, not yours',
+ "changer comment");
+is(changer_config_getconf($dc, $CHANGER_CONFIG_CHANGERDEV), '/dev/sg0',
+ "changer tapedev");
+is_deeply(changer_config_getconf($dc, $CHANGER_CONFIG_PROPERTY),
+ { 'testprop' => {
+ 'priority' => 0,
+ 'values' => [ 'testval' ],
+ 'append' => 0,
+ }
+ }, "changer properties represented correctly");
+
+is_deeply(changer_config_getconf($dc, $CHANGER_CONFIG_DEVICE_PROPERTY),
+ { 'testdprop' => {
+ 'priority' => 0,
+ 'values' => [ 'testdval' ],
+ 'append' => 0,
+ }
+ }, "changer device properties represented correctly");
+
+is_deeply([ sort(+getconf_list("changer")) ],
+ [ sort("my_changer") ],
+ "getconf_list lists all changers");
##
# Test config overwrites (using the config from above)
"INCLUDE LIST is in the dump");
like($dump, qr/INCLUDE\s+FILE OPTIONAL "rhyme"/i,
"INCLUDE FILE is in the dump");
+like($dump, qr/RECOVERY_LIMIT.*SAME-HOST/i,
+ "RECOVERY-LIST is in the dump");
##
# Test nested definitions inside a dumptype
"'optional' has no effect when not on the last occurrence");
}
+##
+# Check out recovery-limit parsing
+
+$testconf = Installcheck::Config->new();
+$testconf->add_param('recovery-limit', '"foo" "bar"');
+$testconf->add_dumptype('rl1', [
+ 'recovery-limit' => 'same-host',
+]);
+$testconf->add_dumptype('rl2', [
+ 'recovery-limit' => '"somehost"',
+]);
+$testconf->add_dumptype('rl3', [
+ 'recovery-limit' => 'same-host "somehost"',
+]);
+$testconf->add_dumptype('rl4', [
+ 'recovery-limit' => '"foohost" same-host',
+]);
+$testconf->write();
+
+$cfg_result = config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+is($cfg_result, $CFGERR_OK,
+ "recovery-limit config loaded")
+ or diag_config_errors();
+SKIP: {
+ skip "error loading config", 5 unless $cfg_result == $CFGERR_OK;
+ my $dtyp;
+
+ is_deeply(getconf($CNF_RECOVERY_LIMIT),
+ [ 'foo', 'bar' ],
+ "global recovery-limit parameter");
+
+ $dtyp = lookup_dumptype("rl1");
+ is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_RECOVERY_LIMIT),
+ [ undef ],
+ "same-host => undef in list");
+
+ $dtyp = lookup_dumptype("rl2");
+ is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_RECOVERY_LIMIT),
+ [ "somehost" ],
+ "hostname => match pattern");
+
+ $dtyp = lookup_dumptype("rl3");
+ is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_RECOVERY_LIMIT),
+ [ undef, "somehost" ],
+ "hostname and same-host parsed correctly");
+
+ $dtyp = lookup_dumptype("rl4");
+ is_deeply(dumptype_getconf($dtyp, $DUMPTYPE_RECOVERY_LIMIT),
+ [ undef, "foohost" ], # note that the order is an implementation detail
+ ".. even if same-host comes last");
+}
+
##
# Try an autolabel with a template and 'any'
is(string_to_boolean($bv->{'val'}), $bv->{'expected'},
"string_to_boolean('$bv->{'val'}') is right");
}
+
+my @prop_names = (
+ {'val' => '', 'expected' => ''},
+ {'val' => 'prop-name', 'expected' => 'prop-name'},
+ {'val' => 'PRoP-NaME', 'expected' => 'prop-name'},
+ {'val' => 'prop_name', 'expected' => 'prop-name'},
+ {'val' => 'FaNCy_ProP', 'expected' => 'fancy-prop'},
+ {'val' => '_under_', 'expected' => '-under-'},
+ {'val' => '-dash-', 'expected' => '-dash-'},
+ {'val' => '-', 'expected' => '-'},
+ {'val' => '_', 'expected' => '-'},
+ );
+
+for my $pn (@prop_names) {
+ is(amandaify_property_name($pn->{'val'}), $pn->{'expected'},
+ "amandaify_property_name('$pn->{'val'}') is right");
+}
+
+$testconf = Installcheck::Config->new();
+$testconf->add_param('property', '"PrOP_nAme" "VALUE"');
+$testconf->write();
+config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+my $properties = getconf($CNF_PROPERTY);
+
+@prop_names = (
+ {'val' => 'prop-name'},
+ {'val' => 'PRoP-NaME'},
+ {'val' => 'prop_name'},
+ {'val' => 'PROP_NAME'},
+ {'val' => 'PRoP-NaME'},
+ {'val' => 'prop_name'},
+ );
+
+for my $pn (@prop_names) {
+ is_deeply($properties->{$pn->{'val'}}->{values}, [ "VALUE" ]);
+}
+
projects / debian / amanda / blobdiff