-### !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! ###
-### ###
-### This file is not meant to be installed "as is", and in fact, it ###
-### WILL NOT WORK! You must go through it and make changes appropriate ###
-### to your own situation. See the documentation in this file, in the ###
-### "man amanda" man page, in the "docs" directory and at the Amanda ###
-### web page (www.amanda.org). ###
-### ###
-### !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! !!! WARNING !!! ###
+# amanda.conf - sample Amanda configuration file. See amanda.conf(5) for
+# details
-#
-# amanda.conf - sample Amanda configuration file. This started off life as
-# the actual config file in use at CS.UMD.EDU.
-#
-# If your configuration is called, say, "csd", then this file normally goes
-# in @CONFIG_DIR@/csd/amanda.conf.
-#
-
-org "@DEFAULT_CONFIG@" # your organization name for reports
-mailto "@CLIENT_LOGIN@" # space separated list of operators at your site
+org "@DEFAULT_CONFIG@" # your organization name for reports
+mailto "@CLIENT_LOGIN@" # space separated list of operators at your site
dumpuser "@CLIENT_LOGIN@" # the user to run dumps under
inparallel 4 # maximum dumpers that will run in parallel (max 63)
taperalgo first # The algorithm used to choose which dump image to send
# to the taper.
-
- # Possible values: [first|firstfit|largest|largestfit|smallest|last]
+ # Possible values:
+ # [first|firstfit|largest|largestfit|smallest|last]
# Default: first.
-
# first First in - first out.
- # firstfit The first dump image that will fit on the current tape.
+ # firstfit The first dump image that will fit
+ # on the current tape.
# largest The largest dump image.
- # largestfit The largest dump image that will fit on the current tape.
+ # largestfit The largest dump image that will fit
+ # on the current tape.
# smallest The smallest dump image.
# last Last in - first out.
bumpmult 4 # threshold = bumpsize * bumpmult^(level-1)
etimeout 300 # number of seconds per filesystem for estimates.
-#etimeout -600 # total number of seconds for estimates.
-# a positive number will be multiplied by the number of filesystems on
-# each host; a negative number will be taken as an absolute total time-out.
-# The default is 5 minutes per filesystem.
-
dtimeout 1800 # number of idle seconds before a dump is aborted.
-
ctimeout 30 # maximum number of seconds that amcheck waits
# for each client host
-tapebufs 20
-# A positive integer telling taper how many 32k buffers to allocate.
-# WARNING! If this is set too high, taper will not be able to allocate
-# the memory and will die. The default is 20 (640k).
+tapebufs 20 # A positive integer telling taper how many
+ # 32k buffers to allocate. The default is 20 (640k).
+
+# By default, Amanda can only track at most one run per calendar day. When
+# the usetimestamps option is enabled, however, Amanda can track as many
+# runs as you care to make.
+# WARNING: This option is not backward-compatible. Do not enable it if you
+# intend to downgrade your server installation to Amanda community
+# edition 2.5
+usetimestamps yes
# Specify tape device and/or tape changer. If you don't have a tape
# parameter. Some rely on a configuration file (changerfile) to
# obtain more information about tape devices, number of slots, etc;
# others just need to store some data in files, whose names will start
-# with changerfile. For more information about individual tape
-# changers, read docs/TAPE.CHANGERS.
+# with changerfile.
# At most one changerfile entry must be defined; select the most
# appropriate one for your configuration. If you select man-changer,
# keep the first one; if you decide not to use a tape changer, you may
# comment them all out.
-runtapes 1 # number of tapes to be used in a single run of amdump
-tpchanger "chg-manual" # the tape-changer glue script
+runtapes 1 # number of tapes to be used in a single run of amdump
+tpchanger "chg-manual" # the tape-changer glue script
tapedev "@DEFAULT_TAPE_DEVICE@" # the no-rewind tape device to be used
rawtapedev "@DEFAULT_RAW_TAPE_DEVICE@" # the raw device to be used (ftape only)
#changerfile "@CONFIG_DIR@/@DEFAULT_CONFIG@/changer"
holdingdisk hd1 {
comment "main holding disk"
directory "/dumps/amanda" # where the holding disk is
- use -100 Mb # how much space can we use on it
- # a non-positive value means:
- # use all space but that value
+ use -100 Mb # how much space can we use on it
+ # a non-positive value means:
+ # use all space but that value
chunksize 1Gb # size of chunk if you want big dump to be
# dumped on multiple files on holding disks
# N Kb/Mb/Gb split images in chunks of size N
# you have selected some database format other than the `text' default)
infofile "@CONFIG_DIR@/@DEFAULT_CONFIG@/curinfo" # database DIRECTORY
logdir "@CONFIG_DIR@/@DEFAULT_CONFIG@" # log directory
-indexdir "@CONFIG_DIR@/@DEFAULT_CONFIG@/index" # index directory
-#tapelist "@CONFIG_DIR/@DEFAULT_CONFIG@/tapelist" # list of used tapes
+indexdir "@CONFIG_DIR@/@DEFAULT_CONFIG@/index" # index directory
+#tapelist "@CONFIG_DIR@/@DEFAULT_CONFIG@/tapelist" # list of used tapes
# tapelist is stored, by default, in the directory that contains amanda.conf
# tapetypes
# it takes only a few seconds but the result is not
# accurate if your disk usage changes from day to day.
# Default: [client]
-# encrypt - specify encryption of the backed up data. Valid values are:
+# encrypt - specify encryption of the backed up data. Valid values are:
# "none" - don't encrypt the dump output.
# "client" - encrypt on the client using the program specified by
# client_encrypt "PROG".
# going to be backed up.
# Default: include all files
# holdingdisk - should the holding disk be used for this dump. Useful for
-# dumping the holding disk itself. Default: [holdingdisk yes]
+# dumping the holding disk itself. Default: [holdingdisk auto]
+# "never" - Never use the holding disk.
+# "auto" - Use the holding disk if possible.
+# "required" - Always use the holding disk.
# ignore - do not back this filesystem up. Useful for sharing a single
# disklist in several configurations.
# index - keep an index of the files backed up. Default: [index no]
# mode", as many incrementals as will fit on the holding disk
# are done, higher priority first, to insure the important
# disks are at least dumped. Default: [priority medium]
-# program - specify the dump system to use. Valid values are "DUMP" and
-# "GNUTAR". Default: [program "DUMP"].
+# program - specify the dump system to use. Valid values are "DUMP",
+# or "GNUTAR". Default: [program "DUMP"].
# record - record the backup in the time-stamp-database of the backup
# program (e.g. /etc/dumpdates for DUMP or
# @GNUTAR_LISTED_INCREMENTAL_DIRX@ for GNUTAR.).
dumpcycle 0
}
+# Dumptypes for gnutar
define dumptype root-tar {
global
program "GNUTAR"
define dumptype holding-disk {
global
comment "The master-host holding disk itself"
- holdingdisk no # do not use the holding disk
+ holdingdisk never # do not use the holding disk
priority medium
}
define dumptype custom-compress {
global
program "GNUTAR"
- comment "test dump with custom client compression"
+ comment "custom client compression dumped with tar"
compress client custom
client_custom_compress "/usr/bin/bzip2"
}
-define dumptype encrypt-fast {
+define dumptype server-encrypt-fast {
global
program "GNUTAR"
- comment "test dump with fast client compression and server symmetric encryption"
+ comment "fast client compression and server symmetric encryption"
compress client fast
encrypt server
- server_encrypt "/usr/local/sbin/amcrypt"
+ server_encrypt "/usr/sbin/amcrypt"
server_decrypt_option "-d"
}
+define dumptype client-encrypt-nocomp {
+ global
+ program "GNUTAR"
+ comment "no compression and client symmetric encryption"
+ compress none
+ encrypt client
+ client_encrypt "/usr/sbin/amcrypt"
+ client_decrypt_option "-d"
+}
+
+
+# To use gpg public-key encryption, gpg does compress with zlib by default.
+# Thus, no need to specify compress
+
+#define dumptype gpg-encrypt {
+# global
+# program "GNUTAR"
+# comment "server public-key encryption, dumped with tar"
+# compress none
+# encrypt server
+# server_encrypt "/usr/sbin/amgpgcrypt"
+# server_decrypt_option "-d"
+#}
+
+
# network interfaces
#
# These are referred to by the disklist file. They define the attributes
projects / debian / amanda / blobdiff