{
int i;
- dbprintf(("Number of configurations: %d\n",chg->number_of_configs));
- dbprintf(("Tapes need eject: %s\n",(chg->eject>0?"Yes":"No")));
- dbprintf (("\traw: %d\n",chg->eject));
- dbprintf(("Inv. auto update: %s\n",(chg->autoinv>0?"Yes":"No")));
- dbprintf (("\traw: %d\n",chg->autoinv));
- dbprintf(("barcode reader : %s\n",(chg->havebarcode>0?"Yes":"No")));
- dbprintf (("\traw: %d\n",chg->havebarcode));
- dbprintf(("Emulate Barcode : %s\n",(chg->emubarcode>0?"Yes":"No")));
- dbprintf (("\traw: %d\n",chg->emubarcode));
+ dbprintf(_("Number of configurations: %d\n"), chg->number_of_configs);
+ dbprintf(_("Tapes need eject: %s\n"), (chg->eject>0 ? _("Yes") : _("No")));
+ dbprintf (_("\traw: %d\n"),chg->eject);
+ dbprintf(_("Inv. auto update: %s\n"), (chg->autoinv>0 ? _("Yes") : _("No")));
+ dbprintf (_("\traw: %d\n"),chg->autoinv);
+ dbprintf(_("barcode reader : %s\n"), (chg->havebarcode>0 ? _("Yes") : _("No")));
+ dbprintf (_("\traw: %d\n"),chg->havebarcode);
+ dbprintf(_("Emulate Barcode : %s\n"), (chg->emubarcode>0 ? _("Yes") : _("No")));
+ dbprintf (_("\traw: %d\n"),chg->emubarcode);
if (chg->debuglevel != NULL)
- dbprintf(("debug level : %s\n", chg->debuglevel));
- dbprintf(("Tapes need sleep: %d seconds\n", (int)chg->sleep));
- dbprintf(("Cleancycles : %d\n",chg->cleanmax));
- dbprintf(("Changerdevice : %s\n",chg->device));
+ dbprintf(_("debug level : %s\n"), chg->debuglevel);
+ dbprintf(_("Tapes need sleep: %ld seconds\n"), (long int)chg->sleep);
+ dbprintf(_("Clean cycles : %d\n"), chg->cleanmax);
+ dbprintf(_("Changer device : %s\n"), chg->device);
if (chg->labelfile != NULL)
- dbprintf(("Labelfile : %s\n", chg->labelfile));
+ dbprintf(_("Label file : %s\n"), chg->labelfile);
for (i=0; i<chg->number_of_configs; i++){
- dbprintf(("Tapeconfig Nr: %d\n",i));
- dbprintf((" Drivenumber : %d\n",chg->conf[i].drivenum));
- dbprintf((" Startslot : %d\n",chg->conf[i].start));
- dbprintf((" Endslot : %d\n",chg->conf[i].end));
- dbprintf((" Cleanslot : %d\n",chg->conf[i].cleanslot));
+ dbprintf(_("Tape config Nr: %d\n"), i);
+ dbprintf(_(" Drive number : %d\n"), chg->conf[i].drivenum);
+ dbprintf(_(" Start slot : %d\n"), chg->conf[i].start);
+ dbprintf(_(" End slot : %d\n"), chg->conf[i].end);
+ dbprintf(_(" Clean slot : %d\n"), chg->conf[i].cleanslot);
if (chg->conf[i].device != NULL)
- dbprintf((" Devicename : %s\n",chg->conf[i].device));
+ dbprintf(_(" Device name : %s\n"), chg->conf[i].device);
else
- dbprintf((" Devicename : none\n"));
+ dbprintf(_(" Device name : none\n"));
if (chg->conf[i].changerident != NULL)
- dbprintf((" changerident : %s\n",chg->conf[i].changerident));
+ dbprintf(_(" changer ident : %s\n"), chg->conf[i].changerident);
else
- dbprintf((" changerident : none\n"));
+ dbprintf(_(" changer ident : none\n"));
if (chg->conf[i].scsitapedev != NULL)
- dbprintf((" SCSITapedev : %s\n",chg->conf[i].scsitapedev));
+ dbprintf(_(" SCSI Tape dev : %s\n"), chg->conf[i].scsitapedev);
else
- dbprintf((" SCSITapedev : none\n"));
+ dbprintf(_(" SCSI Tape dev : none\n"));
if (chg->conf[i].tapeident != NULL)
- dbprintf((" tapeident : %s\n",chg->conf[i].tapeident));
+ dbprintf(_(" tape ident : %s\n"), chg->conf[i].tapeident);
else
- dbprintf((" tapeident : none\n"));
+ dbprintf(_(" tape ident : none\n"));
if (chg->conf[i].tapestatfile != NULL)
- dbprintf((" statfile : %s\n", chg->conf[i].tapestatfile));
+ dbprintf(_(" stat file : %s\n"), chg->conf[i].tapestatfile);
else
- dbprintf((" statfile : none\n"));
+ dbprintf(_(" stat file : none\n"));
if (chg->conf[i].slotfile != NULL)
- dbprintf((" Slotfile : %s\n",chg->conf[i].slotfile));
+ dbprintf(_(" Slot file : %s\n"), chg->conf[i].slotfile);
else
- dbprintf((" Slotfile : none\n"));
+ dbprintf(_(" Slot file : none\n"));
if (chg->conf[i].cleanfile != NULL)
- dbprintf((" Cleanfile : %s\n",chg->conf[i].cleanfile));
+ dbprintf(_(" Clean file : %s\n"), chg->conf[i].cleanfile);
else
- dbprintf((" Cleanfile : none\n"));
+ dbprintf(_(" Clean file : none\n"));
if (chg->conf[i].timefile != NULL)
- dbprintf((" Usagecount : %s\n",chg->conf[i].timefile));
+ dbprintf(_(" Usage count : %s\n"), chg->conf[i].timefile);
else
- dbprintf((" Usagecount : none\n"));
+ dbprintf(_(" Usage count : none\n"));
}
}
} else {
numconf = atoi(value);
if (numconf < 1 || numconf > 100) {
- fprintf(stderr,"numconf %d is bad\n", numconf);
+ g_fprintf(stderr,_("numconf %d is bad\n"), numconf);
numconf = 1;
}
init_changer_struct(chg, numconf);
}
switch (token) {
case NUMDRIVE: if (atoi(value) != numconf)
- fprintf(stderr,"Error: number_drives at wrong place, should be "\
- "first in file\n");
+ g_fprintf(stderr,_("Error: number_drives at wrong place, should be "
+ "first in file\n"));
break;
case AUTOINV:
chg->autoinv = 1;
case CHANGERIDENT:
chg->conf[drivenum].changerident = stralloc(value);
if (drivenum < 0 || drivenum > 100) {
- fprintf(stderr,"drivenum %d is bad\n", drivenum);
+ g_fprintf(stderr,_("drivenum %d is bad\n"), drivenum);
drivenum = 0;
}
if (strcmp(chg->conf[drivenum].changerident,"generic_changer") != 0) {
case DRIVE:
drivenum = atoi(value);
if (drivenum < 0) {
- fprintf(stderr,"Error: drive must be >= 0\n");
+ g_fprintf(stderr,_("Error: drive must be >= 0\n"));
drivenum = 0;
} else if (drivenum >= numconf) {
- fprintf(stderr,"Error: drive must be less than number_drives\n");
+ g_fprintf(stderr,_("Error: drive must be less than number_drives\n"));
drivenum = numconf;
}
break;
if (drivenum < numconf){
chg->conf[drivenum].drivenum = atoi(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " drivenum ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " drivenum ignored\n"));
}
break;
case START:
if (drivenum < numconf){
chg->conf[drivenum].start = atoi(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " startuse ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " startuse ignored\n"));
}
break;
case END:
if (drivenum < numconf){
chg->conf[drivenum].end = atoi(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " enduse ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " enduse ignored\n"));
}
break;
case CLEAN:
if (drivenum < numconf){
chg->conf[drivenum].cleanslot = atoi(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " cleanslot ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " cleanslot ignored\n"));
}
break;
case DEVICE:
if (drivenum < numconf){
chg->conf[drivenum].device = stralloc(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " device ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " device ignored\n"));
}
break;
case STATFILE:
if (drivenum < numconf){
chg->conf[drivenum].slotfile = stralloc(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " slotfile ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " slotfile ignored\n"));
}
break;
case CLEANFILE:
if (drivenum < numconf){
chg->conf[drivenum].cleanfile = stralloc(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " cleanfile ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " cleanfile ignored\n"));
}
break;
case USAGECOUNT:
if (drivenum < numconf){
chg->conf[drivenum].timefile = stralloc(value);
} else {
- fprintf(stderr,"Error: drive is not less than number_drives"\
- " usagecount ignored\n");
+ g_fprintf(stderr,_("Error: drive is not less than number_drives"
+ " usagecount ignored\n"));
}
break;
default:
- fprintf(stderr,"Error: Unknown token\n");
+ g_fprintf(stderr,_("Error: Unknown token\n"));
break;
}
}
int retval = -1;
int ret; /* return value for the fscanf function */
if ((inf=fopen(count_file,"r")) == NULL) {
- fprintf(stderr, "%s: unable to open (%s)\n",
+ g_fprintf(stderr, _("%s: unable to open (%s)\n"),
get_pname(), count_file);
exit(2);
}
return;
if ((inf=fopen(count_file,"w")) == NULL) {
- fprintf(stderr, "%s: unable to open current slot file (%s)\n",
+ g_fprintf(stderr, _("%s: unable to open current slot file (%s)\n"),
get_pname(), count_file);
exit(2);
}
- fprintf(inf, "%d\n", slot);
+ g_fprintf(inf, "%d\n", slot);
fclose(inf);
}
long pos;
int rc;
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : Parameter\n");
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"labelfile -> %s, vol -> %s, barcode -> %s, action -> %c, slot -> %d, from -> %d\n",
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : Parameter\n"));
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("labelfile -> %s, vol -> %s, barcode -> %s, action -> %c, slot -> %d, from -> %d\n"),
labelfile,
result->data.voltag,
result->data.barcode,
if (labelfile == NULL)
{
- DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,"Got empty labelfile (NULL)\n");
- ChgExit("MapBarCode", "MapBarCode name of labelfile is not set\n",FATAL);
+ DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,_("Got empty labelfile (NULL)\n"));
+ ChgExit("MapBarCode", _("MapBarCode name of labelfile is not set\n"),FATAL);
/*NOTREACHED*/
}
if (access(labelfile, F_OK) == -1)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE, "MapBarCode : creating %s", labelfile);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE, _("MapBarCode : creating %s"), labelfile);
if ((fp = fopen(labelfile, "w+")) == NULL)
{
- DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE," failed\n");
- ChgExit("MapBarCode", "MapBarCode, creating labelfile failed\n", FATAL);
+ DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,_(" failed\n"));
+ ChgExit("MapBarCode", _("MapBarCode, creating labelfile failed\n"), FATAL);
/*NOTREACHED*/
}
- fprintf(fp,":%d:", LABEL_DB_VERSION);
+ g_fprintf(fp,":%d:", LABEL_DB_VERSION);
fclose(fp);
}
if ((fp = fopen(labelfile, "r+")) == NULL)
{
- DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,"MapBarCode : failed to open %s\n", labelfile);
- ChgExit("MapBarCode", "MapBarCode, opening labelfile for read/write failed\n", FATAL);
+ DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,_("MapBarCode : failed to open %s\n"), labelfile);
+ ChgExit("MapBarCode", _("MapBarCode, opening labelfile for read/write failed\n"), FATAL);
/*NOTREACHED*/
}
if (fscanf(fp,":%d:", &version) != 1) {
- ChgExit("MapBarCode", "MapBarCode, DB Version unreadable.\n", FATAL);
+ ChgExit("MapBarCode", _("MapBarCode, DB Version unreadable.\n"), FATAL);
/*NOTREACHED*/
}
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : DB version %d\n", version);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : DB version %d\n"), version);
pos = ftell(fp);
if (version != LABEL_DB_VERSION)
{
- ChgExit("MapBarCode", "MapBarCode, DB Version does not match\n", FATAL);
+ ChgExit("MapBarCode", _("MapBarCode, DB Version does not match\n"), FATAL);
/*NOTREACHED*/
}
if (( plabelv2 = (LabelV2_T *)alloc(SIZEOF(LabelV2_T))) == NULL)
{
- DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,"MapBarCode : alloc failed\n");
- ChgExit("MapBarCode", "MapBarCode alloc failed\n", FATAL);
+ DebugPrint(DEBUG_ERROR,SECTION_MAP_BARCODE,_("MapBarCode : alloc failed\n"));
+ ChgExit("MapBarCode", _("MapBarCode alloc failed\n"), FATAL);
/*NOTREACHED*/
}
if (rsize == SIZEOF(LabelV2_T))
{
record++;
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : (%d) VolTag \"%s\", BarCode %s, inuse %d, slot %d, from %d, loadcount %d\n",record,
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : (%d) VolTag \"%s\", BarCode %s, inuse %d, slot %d, from %d, loadcount %d\n"),record,
plabelv2->voltag,
plabelv2->barcode,
plabelv2->valid,
* Only dump the info
*/
case BARCODE_DUMP:
- printf("Slot -> %d, from -> %d, valid -> %d, Tag -> %s, Barcode -> %s, Loadcount %u\n",
+ g_printf(_("Slot -> %d, from -> %d, valid -> %d, Tag -> %s, Barcode -> %s, Loadcount %u\n"),
plabelv2->slot,
plabelv2->from,
plabelv2->valid,
if (strcmp(plabelv2->barcode, result->data.barcode) == 0)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : update entry\n");
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : update entry\n"));
if (fseek(fp, pos, SEEK_SET) == -1) {
fclose(fp);
amfree(plabelv2);
case FIND_SLOT:
if (strcmp(plabelv2->voltag, result->data.voltag) == 0)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode FIND_SLOT : \n");
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode FIND_SLOT : \n"));
memcpy(&(result->data), plabelv2, SIZEOF(LabelV2_T));
amfree(plabelv2);
return(1);
case UPDATE_SLOT:
if (strcmp(plabelv2->voltag, result->data.voltag) == 0)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode UPDATE_SLOT : update entry\n");
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode UPDATE_SLOT : update entry\n"));
if (fseek(fp, pos, SEEK_SET) == -1) {
fclose(fp);
amfree(plabelv2);
*/
case BARCODE_VOL:
/*
- * DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode: (%d) inside BARCODE_VOL\n", record);
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"file value: %s, searched for value: %s\n", plabelv2->voltag, result->data.voltag);
+ * DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode: (%d) inside BARCODE_VOL\n"), record);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("file value: %s, searched for value: %s\n"), plabelv2->voltag, result->data.voltag);
*/
if (strcmp(plabelv2->voltag, result->data.voltag) == 0)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : VOL %s match\n", result->data.voltag);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : VOL %s match\n"), result->data.voltag);
fclose(fp);
memcpy(&(result->data), plabelv2, SIZEOF(LabelV2_T));
case BARCODE_BARCODE:
if (strcmp(plabelv2->barcode, result->data.barcode) == 0)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : BARCODE %s match\n", result->data.barcode);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : BARCODE %s match\n"), result->data.barcode);
fclose(fp);
memcpy(&(result->data), plabelv2, SIZEOF(LabelV2_T));
break;
default:
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : unknown action\n");
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : unknown action\n"));
break;
}
pos = ftell(fp);
} else {
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : feof (%d)\n", feof(fp));
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : error in read record expect %d, got %d\n",SIZEOF(LabelV2_T), rsize);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : feof (%d)\n"), feof(fp));
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : error in read record expect %d, got %d\n"),SIZEOF(LabelV2_T), rsize);
loop=0;
}
}
*/
if (unusedpos != 0)
{
- DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,"MapBarCode : reuse record %d\n", unusedrec);
+ DebugPrint(DEBUG_INFO,SECTION_MAP_BARCODE,_("MapBarCode : reuse record %d\n"), unusedrec);
if (fseek(fp, unusedpos, SEEK_SET) == -1) {
fclose(fp);
amfree(plabelv2);
char *argv[])
{
int cnt;
- printf("%s: Usage error.\n", argv[0]);
+ g_printf(_("%s: Usage error.\n"), argv[0]);
for (cnt=0; cnt < COMCOUNT; cnt++){
- printf(" %s %s",argv[0],argdefs[cnt].str);
+ g_printf(" %s %s",argv[0],argdefs[cnt].str);
if (argdefs[cnt].takesparam)
- printf(" <param>\n");
+
g_printf(" <param>\n");
else
- printf("\n");
+ g_printf("\n");
}
exit(2);
}
int i;
for (i=0; i < argc; i++)
- dbprintf(("ARG [%d] : %s\n", i, argv[i]));
+ dbprintf(_("ARG [%d] : %s\n"), i, argv[i]);
i = 0;
if ((argc<2)||(argc>3))
usage(argv);
default:
break;
}
- printf("<none> no slot `%s'\n",parameter);
+ g_printf(_("<none> no slot `%s'\n"),parameter);
close(fd);
exit(2);
/*NOTREACHED*/
char *mail_cmd = NULL;
FILE *mailf = NULL;
int mail_pipe_opened = 1;
+#ifdef MAILER
if(getconf_seen(CNF_MAILTO) && strlen(getconf_str(CNF_MAILTO)) > 0 &&
validate_mailto(getconf_str(CNF_MAILTO))) {
mail_cmd = vstralloc(MAILER,
- " -s", " \"", "AMANDA PROBLEM: PLEASE FIX", "\"",
+ " -s", " \"", _("AMANDA PROBLEM: PLEASE FIX"), "\"",
" ", getconf_str(CNF_MAILTO),
NULL);
if((mailf = popen(mail_cmd, "w")) == NULL){
- printf("Mail failed\n");
- error("could not open pipe to \"%s\": %s",
- mail_cmd, strerror(errno));
+ g_printf(_("Mail failed\n"));
+ error(_("could not open pipe to \"%s\": %s"),
+ mail_cmd, strerror(errno));
/*NOTREACHED*/
}
- }
- else {
+ } else {
mail_pipe_opened = 0;
mailf = stderr;
- fprintf(mailf, "\nNo mail recipient specified, output redirected to stderr");
+ g_fprintf(mailf, _("\nNo mail recipient specified, output redirected to stderr"));
}
- fprintf(mailf,"\nThe usage count of your cleaning tape in slot %d",
+#else
+ mail_pipe_opened = 0;
+ mailf = stderr;
+ g_fprintf(mailf, _("\nNo mailer specified; output redirected to stderr"));
+#endif
+ g_fprintf(mailf,_("\nThe usage count of your cleaning tape in slot %d"),
cleancart);
- fprintf(mailf,"\nis more than %d. (cleanmax)",maxclean);
- fprintf(mailf,"\nTapedrive %s needs to be cleaned",tapedev);
- fprintf(mailf,"\nPlease insert a new cleaning tape and reset");
- fprintf(mailf,"\nthe countingfile %s",cnt_file);
+ g_fprintf(mailf,_("\nis more than %d. (cleanmax)"),maxclean);
+ g_fprintf(mailf,_("\nTapedrive %s needs to be cleaned"),tapedev);
+ g_fprintf(mailf,_("\nPlease insert a new cleaning tape and reset"));
+ g_fprintf(mailf,_("\nthe countingfile %s"),cnt_file);
if(mail_pipe_opened == 1 && pclose(mailf) != 0) {
- error("mail command failed: %s", mail_cmd);
+ error(_("mail command failed: %s"), mail_cmd);
/*NOTREACHED*/
}
return;
int
main(
- int argc,
- char *argv[])
+ int argc,
+ char ** argv)
{
int loaded;
int target, oldtarget;
int param_index = 0;
+ /*
+ * Configure program for internationalization:
+ * 1) Only set the message locale for now.
+ * 2) Set textdomain for all amanda related programs to "amanda"
+ * We don't want to be forced to support dozens of message catalogs.
+ */
+ setlocale(LC_MESSAGES, "C");
+ textdomain("amanda");
+
changer = alloc(SIZEOF(changer_t));
pbarcoderes = alloc(SIZEOF(MBC_T));
changer->labelfile = NULL;
changer->conf = NULL;
#ifdef CHG_SCSI_STANDALONE
- printf("Ups standalone\n");
+ g_printf(_("Ups standalone\n"));
#else
set_pname("chg-scsi");
dbopen(DBG_SUBDIR_SERVER);
- dbprintf(("chg-scsi: %s\n", rcsid));
+ dbprintf("chg-scsi: %s\n", rcsid);
ChangerDriverVersion();
if (debug_file == NULL)
break;
}
- if(read_conffile(CONFFILE_NAME)) {
- perror(CONFFILE_NAME);
- exit(1);
- /*NOTREACHED*/
- }
+ config_init(CONFIG_INIT_USE_CWD | CONFIG_INIT_FATAL, NULL);
- chg_scsi_conf = getconf_str(CNF_CHNGRFILE);
+ chg_scsi_conf = getconf_str(CNF_CHANGERFILE);
tape_device = getconf_str(CNF_TAPEDEV);
/* Get the configuration parameters */
if (strlen(tape_device)==1){
if (read_config(chg_scsi_conf, changer) == -1)
{
- fprintf(stderr, "%s open: of %s failed\n", get_pname(), chg_scsi_conf);
+ g_fprintf(stderr, _("%s open: of %s failed\n"), get_pname(), chg_scsi_conf);
return (2);
}
confnum=atoi(tape_device);
if (changer->number_of_configs == 0)
{
- fprintf(stderr,"%s: changer->conf[%d] == NULL\n",
+ g_fprintf(stderr,_("%s: changer->conf[%d] == NULL\n"),
get_pname(), confnum);
return (2);
}
if (confnum >= changer->number_of_configs) {
- fprintf(stderr,"%s: Configuration %s config # out of range (%d >= %d)\n",
+ g_fprintf(stderr,_("%s: Configuration %s config # out of range (%d >= %d)\n"),
get_pname(), chg_scsi_conf,
confnum,
changer->number_of_configs);
if (OpenDevice(INDEX_CHANGER , changer_dev, "changer_dev", changer->conf[confnum].changerident) == 0)
{
int localerr = errno;
- fprintf(stderr, "%s: open: %s: %s\n", get_pname(),
+ g_fprintf(stderr, _("%s: open: %s: %s\n"), get_pname(),
changer_dev, strerror(localerr));
- printf("%s open: %s: %s\n", "<none>", changer_dev, strerror(localerr));
- dbprintf(("%s: open: %s: %s\n", get_pname(),
- changer_dev, strerror(localerr)));
+ g_printf(_("%s open: %s: %s\n"), _("<none>"), changer_dev, strerror(localerr));
+ dbprintf(_("open: %s: %s\n"), changer_dev, strerror(localerr));
return 2;
}
{
if (OpenDevice(INDEX_TAPE, tape_device, "tape_device", changer->conf[confnum].tapeident) == 0)
{
- dbprintf(("warning open of %s: failed\n", tape_device));
+ dbprintf(_("warning open of %s: failed\n"), tape_device);
}
}
{
if (OpenDevice(INDEX_TAPECTL, scsitapedevice, "scsitapedevice", changer->conf[confnum].tapeident) == 0)
{
- dbprintf(("warning open of %s: failed\n", scsitapedevice));
+ dbprintf(_("warning open of %s: failed\n"), scsitapedevice);
}
}
{
if (pDev[INDEX_TAPE].avail == 0 && pDev[INDEX_TAPECTL].avail == 0)
{
- printf("No device found for tape eject");
+ g_printf(_("No device found for tape eject"));
return(2);
}
}
{
if (changer->labelfile == NULL)
{
- printf("labelfile param not set in your config\n");
+ g_printf(_("labelfile param not set in your config\n"));
return(2);
}
}
if (slot_file == NULL)
{
- printf("slotfile param. not set in your config\n");
+ g_printf(_("slotfile param. not set in your config\n"));
return(2);
}
if (access(slot_file,R_OK|W_OK) != 0)
{
- printf("slotfile %s does not exsist or is not read/write\n", slot_file);
+ g_printf(_("slotfile %s does not exsist or is not read/write\n"), slot_file);
return(2);
}
} else { /* if (strlen(tape_device)==1) */
- printf("please check your config and use a config file for chg-scsi\n");
+ g_printf(_("please check your config and use a config file for chg-scsi\n"));
return(2);
}
drivecnt = get_drive_count(fd);
if (drive_num > drivecnt) {
- printf("%s drive number error (%d > %d)\n", "<none>",
+ g_printf(_("%s drive number error (%d > %d)\n"), _("<none>"),
drive_num, drivecnt);
- fprintf(stderr, "%s: requested drive number (%d) greater than "
- "number of supported drives (%d)\n", get_pname(),
+ g_fprintf(stderr, _("%s: requested drive number (%d) greater than "
+ "number of supported drives (%d)\n"), get_pname(),
drive_num, drivecnt);
- dbprintf(("%s: requested drive number (%d) greater than "
- "number of supported drives (%d)\n", get_pname(),
- drive_num, drivecnt));
+ dbprintf(_("requested drive number (%d) is greater than "
+ "number of supported drives (%d)\n"), drive_num, drivecnt);
return 2;
}
strncpy(pbarcoderes->data.barcode, pDTE[drive_num].VolTag,
SIZEOF(pbarcoderes->data.barcode));
MapBarCode(changer->labelfile, pbarcoderes);
- printf("0 0 0\n");
+ g_printf("0 0 0\n");
break;
/*
oldtarget = get_current_slot(slot_file);
if (oldtarget < 0)
{
- dbprintf(("COM_INVENTORY: get_current_slot %d\n", oldtarget));
+ dbprintf(_("COM_INVENTORY: get_current_slot %d\n"), oldtarget);
oldtarget = find_empty(fd, slot_offset, use_slots);
- dbprintf(("COM_INVENTORY: find_empty %d\n", oldtarget));
+ dbprintf(_("COM_INVENTORY: find_empty %d\n"), oldtarget);
}
if (need_eject)
*/
if (BarCode(fd) == 1 && emubarcode != 1)
{
- dbprintf(("search : look for %s\n", com.parameter));
+ dbprintf(_("search : look for %s\n"), com.parameter);
pbarcoderes->action = BARCODE_VOL;
pbarcoderes->data.slot = -1;
strncpy(pbarcoderes->data.voltag, com.parameter,
*/
if (pbarcoderes->data.slot == -1 && pbarcoderes->data.barcode == NULL)
{
- printf("Label %s not found (1)\n",com.parameter);
+ g_printf(_("Label %s not found (1)\n"),com.parameter);
endstatus = 2;
close(fd);
break;
{
if (strcmp(pSTE[x].VolTag, pbarcoderes->data.barcode) == 0)
{
- dbprintf(("search : found slot %d\n", x));
+ dbprintf(_("search : found slot %d\n"), x);
target = x;
}
}
{
if (strcmp(pDTE[x].VolTag, pbarcoderes->data.barcode) == 0)
{
- dbprintf(("search : found in tape %d\n", x));
+ dbprintf(_("search : found in tape %d\n"), x);
/*
*/
if (x == drive_num) {
oldtarget = get_current_slot(slot_file);
- printf("%d %s\n", oldtarget - slot_offset, tape_device);
+ g_printf("%d %s\n", oldtarget - slot_offset, tape_device);
return(0);
} else {
- printf("LABEL in wrong tape Unit\n");
+ g_printf(_("LABEL in wrong tape Unit\n"));
return(2);
}
}
*/
if (target == -1)
{
- printf("Label %s not found (2) \n",com.parameter);
+ g_printf(_("Label %s not found (2) \n"),com.parameter);
close(fd);
endstatus = 2;
break;
*/
if (target == -1)
{
- printf("Label %s not found (3)\n",com.parameter);
+ g_printf(_("Label %s not found (3)\n"),com.parameter);
close(fd);
endstatus = 2;
break;
*/
if (emubarcode == 1 && BarCode(fd) != 1)
{
- dbprintf(("search : look for %s\n", com.parameter));
+ dbprintf(_("search : look for %s\n"), com.parameter);
pbarcoderes->action = FIND_SLOT;
pbarcoderes->data.slot = -1;
strncpy(pbarcoderes->data.voltag, com.parameter,
{
target = pbarcoderes->data.slot;
} else {
- printf("Barcode DB out of sync \n");
+ g_printf(_("Barcode DB out of sync \n"));
close(fd);
endstatus=2;
break;
}
} else {
- printf("Label %s not found \n",com.parameter);
+ g_printf(_("Label %s not found \n"),com.parameter);
close(fd);
endstatus = 2;
break;
{
if (is_positive_number(com.parameter)) {
if ((target = atoi(com.parameter))>=use_slots) {
- printf("<none> no slot `%d'\n",target);
+ g_printf(_("<none> no slot `%d'\n"),target);
close(fd);
endstatus = 2;
break;
oldtarget = get_current_slot(slot_file);
if (oldtarget < 0)
{
- dbprintf(("COM_SLOT: get_current_slot %d\n", oldtarget));
+ dbprintf(_("COM_SLOT: get_current_slot %d\n"), oldtarget);
oldtarget = find_empty(fd, slot_offset, use_slots);
- dbprintf(("COM_SLOT: find_empty %d\n", oldtarget));
+ dbprintf(_("COM_SLOT: find_empty %d\n"), oldtarget);
}
/*
put_current_slot(slot_file, target);
if (!loaded && isempty(fd, target)) {
- printf("%d slot %d is empty\n",target - slot_offset,
+ g_printf(_("%d slot %d is empty\n"),target - slot_offset,
target - slot_offset);
close(fd);
endstatus = 1;
clean_tape(fd, tape_device, clean_file, drive_num,
clean_slot, maxclean, time_file);
if (load(fd, drive_num, target) != 0) {
- printf("%d slot %d move failed\n",target - slot_offset,
+ g_printf(_("%d slot %d move failed\n"),target - slot_offset,
target - slot_offset);
close(fd);
endstatus = 2;
{
if (Tape_Ready(INDEX_TAPECTL, need_sleep) == -1)
{
- printf("tape not ready\n");
+ g_printf(_("tape not ready\n"));
endstatus = 2;
break;
}
} else {
if (Tape_Ready(INDEX_TAPECTL, need_sleep) == -1)
{
- printf("tape not ready\n");
+ g_printf(_("tape not ready\n"));
endstatus = 2;
break;
}
}
}
- printf("%d %s\n", target - slot_offset, tape_device);
+ g_printf("%d %s\n", target - slot_offset, tape_device);
break;
case COM_INFO:
}
loaded = loaded - (int)slot_offset;
- printf("%d %d 1", loaded, use_slots);
+ g_printf("%d %d 1", loaded, use_slots);
if (BarCode(fd) == 1 || emubarcode == 1)
{
- printf(" 1\n");
+ g_printf(" 1\n");
} else {
- printf(" 0\n");
+ g_printf(" 0\n");
}
break;
if (target < 0)
{
- dbprintf(("COM_RESET: get_current_slot %d\n", target));
+ dbprintf(_("COM_RESET: get_current_slot %d\n"), target);
target = find_empty(fd, slot_offset, use_slots);
- dbprintf(("COM_RESET: find_empty %d\n", target));
+ dbprintf(_("COM_RESET: find_empty %d\n"), target);
}
if (loaded) {
}
if (isempty(fd, slot_offset)) {
- printf("0 slot 0 is empty\n");
+ g_printf(_("0 slot 0 is empty\n"));
close(fd);
endstatus = 1;
break;
}
if (load(fd, drive_num, slot_offset) != 0) {
- printf("%d slot %d move failed\n",
+ g_printf(_("%d slot %d move failed\n"),
drive_num, slot_offset);
close(fd);
put_current_slot(slot_file, slot_offset);
{
if (Tape_Ready(INDEX_TAPECTL, need_sleep) == -1)
{
- printf("tape not ready\n");
+ g_printf(_("tape not ready\n"));
endstatus = 2;
break;
}
} else {
if (Tape_Ready(INDEX_TAPECTL, need_sleep) == -1)
{
- printf("tape not ready\n");
+ g_printf(_("tape not ready\n"));
endstatus = 2;
break;
}
}
}
- printf("%d %s\n", slot_offset, tape_device);
+ g_printf(_("%d %s\n"), slot_offset, tape_device);
break;
case COM_EJECT:
target = get_current_slot(slot_file);
if (target < 0)
{
- dbprintf(("COM_EJECT: get_current_slot %d\n", target));
+ dbprintf(_("COM_EJECT: get_current_slot %d\n"), target);
target = find_empty(fd, slot_offset, use_slots);
- dbprintf(("COM_EJECT: find_empty %d\n", target));
+ dbprintf(_("COM_EJECT: find_empty %d\n"), target);
}
if (need_eject)
if (ask_clean(scsitapedevice))
clean_tape(fd, tape_device, clean_file, drive_num, clean_slot,
maxclean, time_file);
- printf("%d %s\n", target, tape_device);
+ g_printf("%d %s\n", target, tape_device);
} else {
- printf("%d %s\n", target, "drive was not loaded");
+ g_printf(_("%d drive was not loaded\n"), target);
endstatus = 1;
}
break;
target = get_current_slot(slot_file);
if (target < 0)
{
- dbprintf(("COM_CLEAN: get_current_slot %d\n", target));
+ dbprintf(_("COM_CLEAN: get_current_slot %d\n"), target);
target = find_empty(fd, slot_offset, use_slots);
- dbprintf(("COM_CLEAN: find_empty %d\n",target));
+ dbprintf(_("COM_CLEAN: find_empty %d\n"),target);
}
if (need_eject)
clean_tape(fd, tape_device, clean_file, drive_num, clean_slot,
maxclean, time_file);
- printf("%s cleaned\n", tape_device);
+ g_printf(_("%s cleaned\n"), tape_device);
break;
};
{
if (changer->autoinv == 1)
{
- DebugPrint(DEBUG_INFO,SECTION_INFO, "Do an inventory \n");
+ DebugPrint(DEBUG_INFO,SECTION_INFO, _("Do an inventory \n"));
Inventory(changer->labelfile, drive_num, changer->eject,
0, 0, clean_slot);
} else {
- DebugPrint(DEBUG_INFO,SECTION_INFO, "Set all entrys in DB to invalid\n");
+ DebugPrint(DEBUG_INFO,SECTION_INFO, _("Set all entrys in DB to invalid\n"));
memset(pbarcoderes, 0 , SIZEOF(MBC_T));
pbarcoderes->action = RESET_VALID;
MapBarCode(changer->labelfile,pbarcoderes);
}
}
- DebugPrint(DEBUG_INFO,SECTION_INFO,"Exit status -> %d\n", endstatus);
+ DebugPrint(DEBUG_INFO,SECTION_INFO,_("Exit status -> %d\n"), endstatus);
dbclose();
return endstatus;
}
projects / debian / amanda / blobdiff