-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
+# vim:ft=automake
+# Copyright (c) 2005-2008 Zmanda Inc. All Rights Reserved.
+#
+# This library is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License version 2.1 as
+# published by the Free Software Foundation.
+#
+# This library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
+# License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this library; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
+# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
+
+# simple include file to pre-define variables which are then +='d by other
+# scripts in this directory.
+
+# vim:ft=automake
+#
+# Adjust post-install permissions settings. This rule works off two
+# specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data.
+# Each is a whitespace-separated list of commands, all of which are either
+# a variable assignment or a filename. Three variables are available:
+#
+# - dest= sets the destination directory to e.g., $(sbindir)
+# - chown= controls changes in ownership; value is first argument to chown
+# - chmod= controls changes in permissions; value is first argument to chmod
+#
+# As a special case, chown=amanda is taken as equivalent to
+# chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
+# whitespace in the user/group names.
+#
+# when a filename is seen, the currently active variables are applied.
+#
+# Note that scripts are data, not executables!
+#
+# EXAMPLE
+#
+# sbin_PROGRAMS = foo bar bing
+# libexec_PROGRAMS = pro gram
+# sbin_SCRIPTS = sk ript
+# INSTALLPERMS_exec = \
+# dest=$(sbindir) chown=amanda chmod= \
+# foo bar \
+# chmod=07450 \
+# bing
+# dest=$(libexecdir) chmod= \
+# $(libexec_PROGRAMS)
+# INSTALLPERMS_data = \
+# dest=$(sbindir) chown=amanda chmod= \
+# $(sbin_SCRIPTS)
+#
+# This whole operation is not required when making builds for packaging,
+# and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
+# AM_CONDITIONAL. When disabled, the file 'installperms.sh' in the top-level
+# build directory is populated with a format suitable for shell interpretation,
+# with lines like this:
+# installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
+# the arguments being, respectively, owner:group, mode, and filename. There will
+# be exactly one line for each file which has specific permissions. The intention
+# is that this file be used by packaging scripts to set correct permissions at install
+# time. Note that files which have no special permissions requirements do not appear
+# in this file at all, due to limitations of Automake.
+
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
-subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS \
- ChangeLog INSTALL NEWS
+ $(srcdir)/Makefile.in \
+ $(top_srcdir)/config/automake/installperms.am \
+ $(top_srcdir)/config/automake/vars.am $(top_srcdir)/configure \
+ $(top_srcdir)/example/template.d/advanced.conf.in \
+ $(top_srcdir)/example/template.d/amanda-S3.conf.in \
+ $(top_srcdir)/example/template.d/amanda-harddisk.conf.in \
+ $(top_srcdir)/example/template.d/amanda-single-tape.conf.in \
+ $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in \
+ AUTHORS ChangeLog INSTALL NEWS
+@WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
+subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/config/gnulib/absolute-header.m4 \
+am__aclocal_m4_deps = \
+ $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
+ $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
+ $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
+ $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
+ $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
+ $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
+ $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
+ $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
+ $(top_srcdir)/config/macro-archive/xsltproc.m4 \
+ $(top_srcdir)/config/amanda/amplot.m4 \
+ $(top_srcdir)/config/amanda/bsd-security.m4 \
+ $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
+ $(top_srcdir)/config/amanda/bsdudp-security.m4 \
+ $(top_srcdir)/config/amanda/changer.m4 \
+ $(top_srcdir)/config/amanda/components.m4 \
+ $(top_srcdir)/config/amanda/compress.m4 \
+ $(top_srcdir)/config/amanda/config.m4 \
+ $(top_srcdir)/config/amanda/debugging.m4 \
+ $(top_srcdir)/config/amanda/defaults.m4 \
+ $(top_srcdir)/config/amanda/devprefix.m4 \
+ $(top_srcdir)/config/amanda/dirs.m4 \
+ $(top_srcdir)/config/amanda/documentation.m4 \
+ $(top_srcdir)/config/amanda/dumpers.m4 \
+ $(top_srcdir)/config/amanda/flags.m4 \
+ $(top_srcdir)/config/amanda/flock.m4 \
+ $(top_srcdir)/config/amanda/funcs.m4 \
+ $(top_srcdir)/config/amanda/getfsent.m4 \
+ $(top_srcdir)/config/amanda/i18n.m4 \
+ $(top_srcdir)/config/amanda/ipv6.m4 \
+ $(top_srcdir)/config/amanda/krb4-security.m4 \
+ $(top_srcdir)/config/amanda/krb5-security.m4 \
+ $(top_srcdir)/config/amanda/lfs.m4 \
+ $(top_srcdir)/config/amanda/libs.m4 \
+ $(top_srcdir)/config/amanda/net.m4 \
+ $(top_srcdir)/config/amanda/progs.m4 \
+ $(top_srcdir)/config/amanda/ps.m4 \
+ $(top_srcdir)/config/amanda/readdir.m4 \
+ $(top_srcdir)/config/amanda/readline.m4 \
+ $(top_srcdir)/config/amanda/rsh-security.m4 \
+ $(top_srcdir)/config/amanda/s3-device.m4 \
+ $(top_srcdir)/config/amanda/shmem.m4 \
+ $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
+ $(top_srcdir)/config/amanda/ssh-security.m4 \
+ $(top_srcdir)/config/amanda/summary.m4 \
+ $(top_srcdir)/config/amanda/swig.m4 \
+ $(top_srcdir)/config/amanda/syshacks.m4 \
+ $(top_srcdir)/config/amanda/tape.m4 \
+ $(top_srcdir)/config/amanda/types.m4 \
+ $(top_srcdir)/config/amanda/userid.m4 \
+ $(top_srcdir)/config/amanda/version.m4 \
$(top_srcdir)/config/gnulib/alloca.m4 \
$(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
+ $(top_srcdir)/config/gnulib/base64.m4 \
$(top_srcdir)/config/gnulib/eoverflow.m4 \
$(top_srcdir)/config/gnulib/extensions.m4 \
+ $(top_srcdir)/config/gnulib/float_h.m4 \
+ $(top_srcdir)/config/gnulib/fsusage.m4 \
$(top_srcdir)/config/gnulib/getaddrinfo.m4 \
- $(top_srcdir)/config/gnulib/gnulib-cache.m4 \
+ $(top_srcdir)/config/gnulib/getopt.m4 \
+ $(top_srcdir)/config/gnulib/gettimeofday.m4 \
$(top_srcdir)/config/gnulib/gnulib-common.m4 \
$(top_srcdir)/config/gnulib/gnulib-comp.m4 \
- $(top_srcdir)/config/gnulib/gnulib-tool.m4 \
+ $(top_srcdir)/config/gnulib/include_next.m4 \
$(top_srcdir)/config/gnulib/inet_ntop.m4 \
$(top_srcdir)/config/gnulib/intmax_t.m4 \
- $(top_srcdir)/config/gnulib/inttypes_h.m4 \
- $(top_srcdir)/config/gnulib/lib-ld.m4 \
- $(top_srcdir)/config/gnulib/lib-link.m4 \
- $(top_srcdir)/config/gnulib/lib-prefix.m4 \
$(top_srcdir)/config/gnulib/lock.m4 \
- $(top_srcdir)/config/gnulib/longdouble.m4 \
$(top_srcdir)/config/gnulib/longlong.m4 \
+ $(top_srcdir)/config/gnulib/malloc.m4 \
+ $(top_srcdir)/config/gnulib/mkdtemp.m4 \
$(top_srcdir)/config/gnulib/netinet_in_h.m4 \
$(top_srcdir)/config/gnulib/onceonly_2_57.m4 \
- $(top_srcdir)/config/gnulib/size_max.m4 \
+ $(top_srcdir)/config/gnulib/physmem.m4 \
+ $(top_srcdir)/config/gnulib/safe-read.m4 \
+ $(top_srcdir)/config/gnulib/safe-write.m4 \
$(top_srcdir)/config/gnulib/snprintf.m4 \
$(top_srcdir)/config/gnulib/socklen.m4 \
$(top_srcdir)/config/gnulib/sockpfaf.m4 \
+ $(top_srcdir)/config/gnulib/ssize_t.m4 \
$(top_srcdir)/config/gnulib/stdbool.m4 \
- $(top_srcdir)/config/gnulib/stdint_h.m4 \
+ $(top_srcdir)/config/gnulib/stdint.m4 \
+ $(top_srcdir)/config/gnulib/stdio_h.m4 \
+ $(top_srcdir)/config/gnulib/stdlib_h.m4 \
$(top_srcdir)/config/gnulib/strdup.m4 \
$(top_srcdir)/config/gnulib/string_h.m4 \
$(top_srcdir)/config/gnulib/sys_socket_h.m4 \
+ $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
+ $(top_srcdir)/config/gnulib/sys_time_h.m4 \
+ $(top_srcdir)/config/gnulib/tempname.m4 \
+ $(top_srcdir)/config/gnulib/unistd_h.m4 \
$(top_srcdir)/config/gnulib/vasnprintf.m4 \
$(top_srcdir)/config/gnulib/visibility.m4 \
- $(top_srcdir)/config/gnulib/wchar_t.m4 \
- $(top_srcdir)/config/gnulib/wint_t.m4 \
- $(top_srcdir)/config/gnulib/xsize.m4 \
- $(top_srcdir)/configure.in
+ $(top_srcdir)/config/gnulib/wchar.m4 \
+ $(top_srcdir)/config/gettext-macros/gettext.m4 \
+ $(top_srcdir)/config/gettext-macros/iconv.m4 \
+ $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
+ $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
+ $(top_srcdir)/config/gettext-macros/lib-link.m4 \
+ $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
+ $(top_srcdir)/config/gettext-macros/nls.m4 \
+ $(top_srcdir)/config/gettext-macros/po.m4 \
+ $(top_srcdir)/config/gettext-macros/progtest.m4 \
+ $(top_srcdir)/config/gettext-macros/size_max.m4 \
+ $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
+ $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
+ $(top_srcdir)/config/gettext-macros/wint_t.m4 \
+ $(top_srcdir)/config/gettext-macros/xsize.m4 \
+ $(top_srcdir)/config/libtool.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = example/template.d/advanced.conf \
+ example/template.d/amanda-S3.conf \
+ example/template.d/amanda-harddisk.conf \
+ example/template.d/amanda-single-tape.conf \
+ example/template.d/amanda-tape-changer.conf
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
am__installdirs = "$(DESTDIR)$(pkgdatadir)"
pkgdataDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgdata_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = gnulib config common-src amandad-src tape-src \
- client-src dumper-src server-src changer-src restore-src \
- recover-src oldrecover-src amplot man docs example
+DIST_SUBDIRS = . gnulib config common-src amar-src amandad-src \
+ client-src application-src device-src server-src changer-src \
+ xfer-src restore-src recover-src oldrecover-src amplot perl po \
+ man example packaging installcheck
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
-ABSOLUTE_STRING_H = @ABSOLUTE_STRING_H@
ACLOCAL = @ACLOCAL@
+AIX_BACKUP = @AIX_BACKUP@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMANDA_DBGDIR = @AMANDA_DBGDIR@
AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
+AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
AMANDA_TMPDIR = @AMANDA_TMPDIR@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
+AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
AMLINT = @AMLINT@
AMLINTFLAGS = @AMLINTFLAGS@
AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
AMTAR = @AMTAR@
-AM_CFLAGS = @AM_CFLAGS@
+APPLICATION_DIR = @APPLICATION_DIR@
AR = @AR@
ARPA_INET_H = @ARPA_INET_H@
+ASSERTIONS = @ASSERTIONS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
+BASH = @BASH@
BINARY_OWNER = @BINARY_OWNER@
+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
+BSDTCP_SECURITY = @BSDTCP_SECURITY@
+BSDUDP_SECURITY = @BSDUDP_SECURITY@
+BSD_SECURITY = @BSD_SECURITY@
CAT = @CAT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
+CHECK_USERID = @CHECK_USERID@
CHIO = @CHIO@
CHS = @CHS@
+CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
+CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
+CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
CLIENT_LOGIN = @CLIENT_LOGIN@
CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
COMPRESS = @COMPRESS@
-CONFIGURE_COMMAND = @CONFIGURE_COMMAND@
+COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
+COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
+COMPRESS_PATH = @COMPRESS_PATH@
+COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
+CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
CONFIG_DIR = @CONFIG_DIR@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CURL_CONFIG = @CURL_CONFIG@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
-DB_EXT = @DB_EXT@
DD = @DD@
+DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
DEFAULT_CONFIG = @DEFAULT_CONFIG@
-DEFAULT_RAW_TAPE_DEVICE = @DEFAULT_RAW_TAPE_DEVICE@
+DEFAULT_MAILER = @DEFAULT_MAILER@
DEFAULT_SERVER = @DEFAULT_SERVER@
DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
DEPDIR = @DEPDIR@
DOC_BUILD_DATE = @DOC_BUILD_DATE@
DUMP = @DUMP@
-DUMPER_DIR = @DUMPER_DIR@
+DUMP_RETURNS_1 = @DUMP_RETURNS_1@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
-ENABLE_MANPAGE_BUILD_FALSE = @ENABLE_MANPAGE_BUILD_FALSE@
-ENABLE_MANPAGE_BUILD_TRUE = @ENABLE_MANPAGE_BUILD_TRUE@
EOVERFLOW = @EOVERFLOW@
EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
-GCC_COMPILER_FALSE = @GCC_COMPILER_FALSE@
-GCC_COMPILER_TRUE = @GCC_COMPILER_TRUE@
+FLOAT_H = @FLOAT_H@
GETCONF = @GETCONF@
-GL_COND_LIBTOOL_FALSE = @GL_COND_LIBTOOL_FALSE@
-GL_COND_LIBTOOL_TRUE = @GL_COND_LIBTOOL_TRUE@
+GETOPT_H = @GETOPT_H@
+GETTEXT = @GETTEXT@
+GLIB_CFLAGS = @GLIB_CFLAGS@
+GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
+GLIB_LIBS = @GLIB_LIBS@
+GLIB_MKENUMS = @GLIB_MKENUMS@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
+GNULIB_CHOWN = @GNULIB_CHOWN@
+GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
+GNULIB_FCHDIR = @GNULIB_FCHDIR@
+GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FOPEN = @GNULIB_FOPEN@
+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
+GNULIB_FSEEK = @GNULIB_FSEEK@
+GNULIB_FSEEKO = @GNULIB_FSEEKO@
+GNULIB_FTELL = @GNULIB_FTELL@
+GNULIB_FTELLO = @GNULIB_FTELLO@
+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
+GNULIB_GETCWD = @GNULIB_GETCWD@
+GNULIB_GETDELIM = @GNULIB_GETDELIM@
+GNULIB_GETLINE = @GNULIB_GETLINE@
+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
+GNULIB_LCHOWN = @GNULIB_LCHOWN@
+GNULIB_LSEEK = @GNULIB_LSEEK@
+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
+GNULIB_MBSCHR = @GNULIB_MBSCHR@
+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
+GNULIB_MBSLEN = @GNULIB_MBSLEN@
+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
+GNULIB_MBSSEP = @GNULIB_MBSSEP@
+GNULIB_MBSSPN = @GNULIB_MBSSPN@
+GNULIB_MBSSTR = @GNULIB_MBSSTR@
+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
+GNULIB_MEMMEM = @GNULIB_MEMMEM@
+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PUTENV = @GNULIB_PUTENV@
+GNULIB_READLINK = @GNULIB_READLINK@
+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_SETENV = @GNULIB_SETENV@
+GNULIB_SLEEP = @GNULIB_SLEEP@
+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
+GNULIB_STPCPY = @GNULIB_STPCPY@
+GNULIB_STPNCPY = @GNULIB_STPNCPY@
+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
+GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
+GNULIB_STRNDUP = @GNULIB_STRNDUP@
+GNULIB_STRNLEN = @GNULIB_STRNLEN@
+GNULIB_STRPBRK = @GNULIB_STRPBRK@
+GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
GNUPLOT = @GNUPLOT@
GNUTAR = @GNUTAR@
GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
-GNUTAR_LISTED_INCREMENTAL_DIRX = @GNUTAR_LISTED_INCREMENTAL_DIRX@
+GOBJECT_QUERY = @GOBJECT_QUERY@
GREP = @GREP@
GZIP = @GZIP@
+HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
+HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
+HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
+HAVE_DUP2 = @HAVE_DUP2@
+HAVE_FSEEKO = @HAVE_FSEEKO@
+HAVE_FTELLO = @HAVE_FTELLO@
+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GZIP = @HAVE_GZIP@
+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
+HAVE_IO_H = @HAVE_IO_H@
+HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
+HAVE_LSTAT = @HAVE_LSTAT@
+HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
+HAVE_MKDTEMP = @HAVE_MKDTEMP@
+HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
+HAVE_OS_H = @HAVE_OS_H@
+HAVE_READLINK = @HAVE_READLINK@
+HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
+HAVE_SETENV = @HAVE_SETENV@
+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
+HAVE_SLEEP = @HAVE_SLEEP@
+HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
+HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRNDUP = @HAVE_STRNDUP@
HAVE_STRPBRK = @HAVE_STRPBRK@
HAVE_STRSEP = @HAVE_STRSEP@
+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
+HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
+HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNSETENV = @HAVE_UNSETENV@
+HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
+HAVE_VASPRINTF = @HAVE_VASPRINTF@
HAVE_VISIBILITY = @HAVE_VISIBILITY@
+HAVE_WCHAR_H = @HAVE_WCHAR_H@
+HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
+HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
HAVE__BOOL = @HAVE__BOOL@
+INCLUDE_NEXT = @INCLUDE_NEXT@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KRB4_SECURITY = @KRB4_SECURITY@
+KRB5_SECURITY = @KRB5_SECURITY@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBCURL = @LIBCURL@
+LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
LIBMULTITHREAD = @LIBMULTITHREAD@
LIBOBJS = @LIBOBJS@
LIBPTH = @LIBPTH@
-LIBPTH_PREFIX = @LIBPTH_PREFIX@
LIBS = @LIBS@
LIBTHREAD = @LIBTHREAD@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
-LL_FMT = @LL_FMT@
-LL_RFMT = @LL_RFMT@
LN_S = @LN_S@
-LTALLOCA = @LTALLOCA@
+LOCKING = @LOCKING@
+LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
LTLIBOBJS = @LTLIBOBJS@
LTLIBPTH = @LTLIBPTH@
LTLIBTHREAD = @LTLIBTHREAD@
MAILER = @MAILER@
MAKEINFO = @MAKEINFO@
-MAXTAPEBLOCKSIZE = @MAXTAPEBLOCKSIZE@
MCUTIL = @MCUTIL@
MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
MT = @MT@
MTX = @MTX@
MT_FILE_FLAG = @MT_FILE_FLAG@
NETINET_IN_H = @NETINET_IN_H@
+NEXT_FLOAT_H = @NEXT_FLOAT_H@
+NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
+NEXT_STDINT_H = @NEXT_STDINT_H@
+NEXT_STDIO_H = @NEXT_STDIO_H@
+NEXT_STDLIB_H = @NEXT_STDLIB_H@
+NEXT_STRING_H = @NEXT_STRING_H@
+NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
+NEXT_UNISTD_H = @NEXT_UNISTD_H@
+NEXT_WCHAR_H = @NEXT_WCHAR_H@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PATH_SEPARATOR = @PATH_SEPARATOR@
PCAT = @PCAT@
PERL = @PERL@
+PERLEXTLIBS = @PERLEXTLIBS@
+PERL_INC = @PERL_INC@
+PKG_CONFIG = @PKG_CONFIG@
+POSUB = @POSUB@
PRINT = @PRINT@
+PS = @PS@
+PS_ARGUMENT = @PS_ARGUMENT@
+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
-REPLACE_STRCASECMP = @REPLACE_STRCASECMP@
+REPLACE_CHOWN = @REPLACE_CHOWN@
+REPLACE_FCHDIR = @REPLACE_FCHDIR@
+REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
+REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
+REPLACE_FSEEK = @REPLACE_FSEEK@
+REPLACE_FSEEKO = @REPLACE_FSEEKO@
+REPLACE_FTELL = @REPLACE_FTELL@
+REPLACE_FTELLO = @REPLACE_FTELLO@
+REPLACE_GETCWD = @REPLACE_GETCWD@
+REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
+REPLACE_LCHOWN = @REPLACE_LCHOWN@
+REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
+REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PUTENV = @REPLACE_PUTENV@
+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
+REPLACE_SPRINTF = @REPLACE_SPRINTF@
REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
REPLACE_STRSTR = @REPLACE_STRSTR@
+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
+REPLACE_VPRINTF = @REPLACE_VPRINTF@
+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
RESTORE = @RESTORE@
+RSH_SECURITY = @RSH_SECURITY@
SAMBA_CLIENT = @SAMBA_CLIENT@
+SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
+SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
+SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
SERVICE_SUFFIX = @SERVICE_SUFFIX@
SETUID_GROUP = @SETUID_GROUP@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
SORT = @SORT@
SSH = @SSH@
+SSH_SECURITY = @SSH_SECURITY@
STDBOOL_H = @STDBOOL_H@
+STDINT_H = @STDINT_H@
STRIP = @STRIP@
+SVN = @SVN@
+SWIG = @SWIG@
+SWIG_LIB = @SWIG_LIB@
SYS_SOCKET_H = @SYS_SOCKET_H@
+SYS_STAT_H = @SYS_STAT_H@
+SYS_TIME_H = @SYS_TIME_H@
+TCPPORTRANGE = @TCPPORTRANGE@
+TICKET_LIFETIME = @TICKET_LIFETIME@
+UDPPORTRANGE = @UDPPORTRANGE@
+UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
+UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
+USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
+USE_NLS = @USE_NLS@
+USE_RUNDUMP = @USE_RUNDUMP@
USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
VDUMP = @VDUMP@
VERSION = @VERSION@
VERSION_MINOR = @VERSION_MINOR@
VERSION_PATCH = @VERSION_PATCH@
VERSION_SUFFIX = @VERSION_SUFFIX@
+VOID_UNSETENV = @VOID_UNSETENV@
VRESTORE = @VRESTORE@
VXDUMP = @VXDUMP@
VXRESTORE = @VXRESTORE@
-WANT_AMPLOT_FALSE = @WANT_AMPLOT_FALSE@
-WANT_AMPLOT_TRUE = @WANT_AMPLOT_TRUE@
-WANT_CHG_SCSI_FALSE = @WANT_CHG_SCSI_FALSE@
-WANT_CHG_SCSI_TRUE = @WANT_CHG_SCSI_TRUE@
-WANT_CHIO_SCSI_FALSE = @WANT_CHIO_SCSI_FALSE@
-WANT_CHIO_SCSI_TRUE = @WANT_CHIO_SCSI_TRUE@
-WANT_CLIENT_FALSE = @WANT_CLIENT_FALSE@
-WANT_CLIENT_TRUE = @WANT_CLIENT_TRUE@
-WANT_RECOVER_FALSE = @WANT_RECOVER_FALSE@
-WANT_RECOVER_TRUE = @WANT_RECOVER_TRUE@
-WANT_RESTORE_FALSE = @WANT_RESTORE_FALSE@
-WANT_RESTORE_TRUE = @WANT_RESTORE_TRUE@
-WANT_RUNTIME_PSEUDO_RELOC_FALSE = @WANT_RUNTIME_PSEUDO_RELOC_FALSE@
-WANT_RUNTIME_PSEUDO_RELOC_TRUE = @WANT_RUNTIME_PSEUDO_RELOC_TRUE@
-WANT_SAMBA_FALSE = @WANT_SAMBA_FALSE@
-WANT_SAMBA_TRUE = @WANT_SAMBA_TRUE@
-WANT_SERVER_FALSE = @WANT_SERVER_FALSE@
-WANT_SERVER_TRUE = @WANT_SERVER_TRUE@
-WANT_SETUID_CLIENT_FALSE = @WANT_SETUID_CLIENT_FALSE@
-WANT_SETUID_CLIENT_TRUE = @WANT_SETUID_CLIENT_TRUE@
-WANT_SSH_SECURITY_FALSE = @WANT_SSH_SECURITY_FALSE@
-WANT_SSH_SECURITY_TRUE = @WANT_SSH_SECURITY_TRUE@
-WANT_TAPE_FALSE = @WANT_TAPE_FALSE@
-WANT_TAPE_TRUE = @WANT_TAPE_TRUE@
+WCHAR_H = @WCHAR_H@
+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
+WINT_T_SUFFIX = @WINT_T_SUFFIX@
XFSDUMP = @XFSDUMP@
XFSRESTORE = @XFSRESTORE@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XSLREL = @XSLREL@
XSLTPROC = @XSLTPROC@
XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
YACC = @YACC@
-ac_c = @ac_c@
-ac_ct_AR = @ac_ct_AR@
+YFLAGS = @YFLAGS@
+_libcurl_config = @_libcurl_config@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-ac_n = @ac_n@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
+amdatadir = @amdatadir@
+amincludedir = @amincludedir@
+amlibdir = @amlibdir@
+amlibexecdir = @amlibexecdir@
+amperldir = @amperldir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
+htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = 1.4 foreign
-ACINCLUDE_M4 = $(srcdir)/acinclude.m4
-ACINCLUDE_M4I = $(srcdir)/config/acinclude.m4i
-LIBTOOL_M4I = $(srcdir)/config/libtool.m4i
-GNULIB_M4I = $(srcdir)/config/gnulib.m4i
-ACINCLUDE_M4_DEPS = $(GNULIB_M4I) $(ACINCLUDE_M4I) $(LIBTOOL_M4I)
-@WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src dumper-src
-@WANT_TAPE_TRUE@TAPE_SUBDIRS = tape-src
-@WANT_SERVER_TRUE@SERVER_SUBDIRS = server-src changer-src
+SUFFIXES =
+EXTRA_DIST = $(SNAPSHOT_STAMP) $(pkgdata_DATA) autogen contrib/README \
+ contrib/dbbackup.README contrib/dbbackup.ksh \
+ contrib/dbbackup.sql contrib/dbbackup.tcl contrib/mkamandisk \
+ contrib/set_prod_link.pl contrib/gsc/README \
+ contrib/gsc/cfggsc.c contrib/gsc/defgsc.c contrib/gsc/gsc.add \
+ contrib/gsc/gscdd.c contrib/gsc/gscdds.h contrib/gsc/makefile \
+ contrib/gsc/tstinq.c contrib/gsc/ucfggsc.c \
+ patches/regex-3.6alpha.patch patches/samba-largefs.patch \
+ patches/tar-1.12.patch UPGRADING DEVELOPING
+BUILT_SOURCES =
+MOSTLYCLEANFILES =
+CLEANFILES =
+DISTCLEANFILES = $(am__append_1)
+MAINTAINERCLEANFILES =
+
+# sed expression to strip leading directories from a filename; this converts e.g.,
+# src/foo/bar.so to bar.so.
+strip_leading_dirs = s|^.*/||
+@WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
+@WANT_INSTALLPERMS_FALSE@ echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
+
+
+# define a snippet of the scripts below to either perform a chown/chmod operation,
+# or record that operation in the logfile. On entry to the snippet, $$dest is the
+# destination directory, $$cmd is the srcdir-relative pathname of the target file,
+# $$chown is the ownership, and $$chmod is the permission pattern.
+@WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
+@WANT_INSTALLPERMS_TRUE@ if test -n "$$chown"; then \
+@WANT_INSTALLPERMS_TRUE@ echo chown "$$chown" "$$pa"; \
+@WANT_INSTALLPERMS_TRUE@ chown "$$chown" "$$pa" || exit 1; \
+@WANT_INSTALLPERMS_TRUE@ fi; \
+@WANT_INSTALLPERMS_TRUE@ if test -n "$$chmod"; then \
+@WANT_INSTALLPERMS_TRUE@ echo chmod "$$chmod" "$$pa"; \
+@WANT_INSTALLPERMS_TRUE@ chmod "$$chmod" "$$pa" || exit 1; \
+@WANT_INSTALLPERMS_TRUE@ fi
+
+@WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
+ACLOCAL_AMFLAGS = --force -I . -I config -I config/gettext-macros -I config/gnulib -I config/amanda -I config/macro-archive
+@WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src application-src
+@WANT_SERVER_TRUE@SERVER_SUBDIRS = device-src server-src changer-src xfer-src
@WANT_RESTORE_TRUE@RESTORE_SUBDIRS = restore-src
@WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src oldrecover-src
@WANT_AMPLOT_TRUE@PLOT_SUBDIRS = amplot
# order is significant, don't change it arbitrarily
-SUBDIRS = \
+SUBDIRS = . \
gnulib \
config \
common-src \
+ amar-src \
amandad-src \
$(TAPE_SUBDIRS) \
$(CLIENT_SUBDIRS) \
$(RESTORE_SUBDIRS) \
$(RECOVER_SUBDIRS) \
$(PLOT_SUBDIRS) \
- man docs example
+ perl \
+ po \
+ man \
+ example \
+ packaging \
+ installcheck
pkgdata_DATA = \
- ReleaseNotes \
- COPYRIGHT
-
-EXTRA_DIST = $(SNAPSHOT_STAMP) \
- $(pkgdata_DATA) \
- autogen \
- contrib/README \
- contrib/dbbackup.README \
- contrib/dbbackup.ksh \
- contrib/dbbackup.sql \
- contrib/dbbackup.tcl \
- contrib/mkamandisk \
- contrib/set_prod_link.pl \
- contrib/gsc/README \
- contrib/gsc/cfggsc.c \
- contrib/gsc/defgsc.c \
- contrib/gsc/gsc.add \
- contrib/gsc/gscdd.c \
- contrib/gsc/gscdds.h \
- contrib/gsc/makefile \
- contrib/gsc/tstinq.c \
- contrib/gsc/ucfggsc.c \
- patches/regex-3.6alpha.patch \
- patches/samba-largefs.patch \
- patches/tar-1.12.patch
+ ReleaseNotes \
+ COPYRIGHT \
+ NEWS \
+ ChangeLog
CONFIG_STATUS = config.status
-all: all-recursive
+
+# ensure that configure gets the right arguments for distcheck; this keeps the
+# user/group through to the distcheck, rather than defaulting back to 'amanda'.
+DISTCHECK_CONFIGURE_FLAGS = --with-user=$(CLIENT_LOGIN) --with-group=$(SETUID_GROUP) --with-owner=$(BINARY_OWNER) --disable-installperms --without-amperldir --without-force-uid --with-tmpdir=$(AMANDA_TMPDIR) SINGLE_USERID=yes CLOBBER_MY_CONFIG=OK
+all: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
+.SUFFIXES:
am--refresh:
@:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+example/template.d/advanced.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/advanced.conf.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+example/template.d/amanda-S3.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-S3.conf.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+example/template.d/amanda-harddisk.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-harddisk.conf.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+example/template.d/amanda-single-tape.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-single-tape.conf.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+example/template.d/amanda-tape-changer.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
distclean-libtool:
-rm -f libtool
-uninstall-info-am:
install-pkgdataDATA: $(pkgdata_DATA)
@$(NORMAL_INSTALL)
- test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
+ test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
@list='$(pkgdata_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
- here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
distdir: $(DISTFILES)
$(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/amplot $(distdir)/changer-src $(distdir)/client-src $(distdir)/common-src $(distdir)/config/gnulib $(distdir)/contrib $(distdir)/contrib/gsc $(distdir)/dumper-src $(distdir)/example $(distdir)/patches $(distdir)/server-src
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
-check: check-recursive
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(pkgdatadir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
-install: install-recursive
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
info-am:
-install-data-am: install-pkgdataDATA
+install-data-am: install-data-local install-pkgdataDATA
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+
+install-dvi: install-dvi-recursive
+
+install-exec-am: install-exec-local
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-install-exec-am:
+install-html: install-html-recursive
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
ps-am:
-uninstall-am: uninstall-info-am uninstall-pkgdataDATA
+uninstall-am: uninstall-pkgdataDATA
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-data-am install-exec-am install-strip
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-libtool clean-recursive \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
- distclean-generic distclean-libtool distclean-recursive \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+ dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \
+ distcheck distclean distclean-generic distclean-libtool \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-exec install-exec-am \
- install-info install-info-am install-man install-pkgdataDATA \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am uninstall-info-am \
- uninstall-pkgdataDATA
+ install-data install-data-am install-data-hook \
+ install-data-local install-dvi install-dvi-am install-exec \
+ install-exec-am install-exec-hook install-exec-local \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-pkgdataDATA \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-pkgdataDATA
+
+
+installperms-exec:
+ @installperms="$(INSTALLPERMS_exec)"; \
+ test -n "$$installperms" && echo "Setting installation permissions on executables"; \
+ dest=; chown=; chmod=; \
+ for cmd in $$installperms; do \
+ case "$$cmd" in \
+ chown=amanda) \
+ echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
+ dest=*|chown=*|chmod=*) \
+ echo " ($$cmd)"; eval $$cmd;; \
+ *) $(do_file) ;; \
+ esac; \
+ done
+
+installperms-data:
+ @installperms="$(INSTALLPERMS_data)"; \
+ dest=; chown=; chmod=; \
+ for cmd in $$installperms; do \
+ case "$$cmd" in \
+ chown=amanda) \
+ echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
+ dest=*|chown=*|chmod=*) \
+ echo " ($$cmd)"; eval $$cmd;; \
+ *) $(do_file) ;; \
+ esac; \
+ done
+install-exec-hook: installperms-exec
+install-data-hook: installperms-data
-$(ACINCLUDE_M4): $(ACINCLUDE_M4_DEPS)
- @-rm -f $@
- @cat $(ACINCLUDE_M4_DEPS) > $@
+# define a rule to initialize the installperms manifest file
+@WANT_INSTALLPERMS_TRUE@installperms-init:
+@WANT_INSTALLPERMS_FALSE@installperms-init:
+@WANT_INSTALLPERMS_FALSE@ rm -f "$(installperms_sh)"
libtool: $(LIBTOOL_DEPS)
$(SHELL) ./config.status --recheck
+
+# empty out the installperms manifest file when we start
+install-exec-local: installperms-init
+install-data-local: installperms-init
$(CONFIG_STATUS): $(SNAPSHOT_STAMP)
SNAPSHOT:
: SNAPSHOT file was removed, will reconfigure...
(cd recover-src; make lint)
(cd restore-src; make lint)
(cd server-src; make lint)
- (cd tape-src; make lint)
+ (cd xfer-src; make lint)
dist-hook:
find $(distdir)/. -name '*.test.c' -exec rm {} \;
projects / debian / amanda / blobdiff