################################################################################
# You may want to customize these values
################################################################################

# These are the defaults discovered by configure when Amanda was installed.
# They can be overridden here, or by by 'mt_binary' and 'mtx_binary', 
# respectively, in the changerfile (currently only for chg-zd-mtx.sh and
# chg-manual.sh).

MT=@MT@
MTX=@MTX@

# This is the flag used to specify a device filename to 'mt', usually '-f'
MTF=@MT_FILE_FLAG@

################################################################################
# No user-level customization should be required beyond this point.
################################################################################

prefix="@prefix@"
exec_prefix="@exec_prefix@"
sbindir="@sbindir@"
libexecdir="@libexecdir@"
amlibexecdir="@amlibexecdir@"
. "${amlibexecdir}/amanda-sh-lib.sh"

####
# Eponymous functions to access various amanda apps
# TODO: move to amanda-sh-lib.sh

amgetconf() {
    "${sbindir}/amgetconf" "${@}"
}
amdevcheck() {
    "${sbindir}/amdevcheck" "${@}"
}

# This function tries to find a useable mt binary. If a fully-qualified path
# was provided at configure time or via a config file, we check that it
# exists and is executable. If an incomplete path was specified (e.g., "mt"),
# we ask the shell to search the path. Returns 0 on success, 1 on failure.

try_find_mt() {
    # Only do this once.
    if test -n $mt_found; then
        return 0
    fi

    if test -z $MT; then
        MT=mt
    fi

    if "`echo $MT | dd bs=1 count=1`" = "/"; then
        if ! test -f "${MT}"; then
            echo `_ "mt binary at '%s' not found" "$MTX"`
            return 1
        fi
        if ! test -x "${MT}"; then
            echo `_ "mt binary at '%s' is not executable" "$MTX"`
            return 1
        fi
    else
        # try running it to see if the shell can find it
        "$MT" >/dev/null 2>/dev/null
        if test $? -eq 127 -o $? -eq 126; then
            echo `_ "Could not run mt binary at '%s'" "$MTX"`
            return 1
        fi
    fi

    mt_found=yes
    return 0
}

# This function strips the tape: from the front of device names.
# Capture its output with ``.
tape_device_filename() {
    if echo "$1"|grep '^tape:' >/dev/null; then
	echo "$1" | sed 's/^tape://'
    else
	if echo "$1"|grep '^/' >/dev/null; then
	    echo "$1"
	fi
    fi
}

# Invoke amdevcheck to determine whether the device is ready for use.
#
# @return 0 if a tape is loaded or error
# @return 1 if a tape is tape offline or busy
#
# @side-effect: $amdevcheck_message is the contents of all MESSAGE lines from
#               amdevcheck, suitable for use in higher-level error messages
amdevcheck_status() {
    amdevcheck_message=
    local amdevcheck_output=`amdevcheck . $@`
    local amdevcheck_status=$?

    test "$amdevcheck_status" -ne 0 && return 0

    # extract any messages
    amdevcheck_message=`echo "$amdevcheck_output" | sed -n -e '/^MESSAGE /{' -e 's/^MESSAGE //' -e 'p' -e 'q' -e '}'`

    # Return 1 if it's possible that the device is offline or busy; if the device cannot
    # distinguish this state from an error condition, then our caller will just have to
    # time out
    if echo "$amdevcheck_output" | $EGREP "VOLUME_MISSING|DEVICE_BUSY" > /dev/null; then
	return 1
    else
	return 0
    fi
}

# This attempts to eject a device using whatever system tools are available.
# At the moment, that means mt for tapes, and nothing otherwise, but might
# be extended at some later time.

try_eject_device() {
    if echo "$1" | grep '^tape:' > /dev/null; then
        try_eject_device_tape="`echo \"$1\" | cut -b6-`"
    elif echo "$1" | grep -v : > /dev/null; then
        try_eject_device_tape="$1"
    else
        try_eject_device_tape=
    fi

    if test -n "$try_eject_device_tape"; then
        if try_find_mt; then
            $MT $MTF "$try_eject_device_tape" offline
        fi
    else
        # Technically we failed to eject the device, but we presume that's
        # because it doesn't require ejection.
        return 0
    fi
}