# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# vim:ft=automake
# Copyright (c) 2007-2012 Zmanda, Inc.  All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
# Contact information: Zmanda Inc., 465 S. Mathilda Ave., Suite 300
# Sunnyvale, CA 94085, USA, or: http://www.zmanda.com

# simple include file to pre-define variables which are then +='d by other
# scripts in this directory.

# vim:ft=automake
#
# Adjust post-install permissions settings.  This rule works off two
# specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data. 
# Each is a whitespace-separated list of commands, all of which are either
# a variable assignment or a filename.  Three variables are available:
#
#  - dest= sets the destination directory to e.g., $(sbindir)
#  - chown= controls changes in ownership; value is first argument to chown
#  - chmod= controls changes in permissions; value is first argument to chmod
#
# The following special cases are available:
# 	amanda:setuid = $(BINARY_OWNER):$(SETUID_GROUP)
# 	root:setuid = root:$(SETUID_GROUP)
# These variables might otherwise have problems with whitespace in the user/group
# names.
#
# when a filename is seen, the currently active variables are applied.
#
# Note that scripts are data, not executables!
#
# EXAMPLE
#
# sbin_PROGRAMS = foo bar bing
# libexec_PROGRAMS = pro gram
# sbin_SCRIPTS = sk ript
# INSTALLPERMS_exec = \
# 	dest=$(sbindir) chown=amanda chmod= \
# 		foo bar \
# 	chmod=07450 \
# 		bing
# 	dest=$(libexecdir) chmod= \
# 		$(libexec_PROGRAMS)
# INSTALLPERMS_data = \
# 	dest=$(sbindir) chown=amanda chmod= \
# 		$(sbin_SCRIPTS)
#
# This whole operation is not required when making builds for packaging,
# and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
# AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
# build directory is populated with a format suitable for shell interpretation,
# with lines like this:
#   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
# the arguments being, respectively, owner:group, mode, and filename.  There will
# be exactly one line for each file which has specific permissions.  The intention
# is that this file be used by packaging scripts to set correct permissions at install
# time.  Note that files which have no special permissions requirements do not appear 
# in this file at all, due to limitations of Automake.

VPATH = @srcdir@
am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in \
	$(top_srcdir)/config/automake/installperms.am \
	$(top_srcdir)/config/automake/vars.am $(top_srcdir)/configure \
	AUTHORS ChangeLog INSTALL NEWS
@WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps =  \
	$(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
	$(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
	$(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
	$(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
	$(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
	$(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
	$(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
	$(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
	$(top_srcdir)/config/macro-archive/xsltproc.m4 \
	$(top_srcdir)/config/amanda/amplot.m4 \
	$(top_srcdir)/config/amanda/as_needed.m4 \
	$(top_srcdir)/config/amanda/bsd-security.m4 \
	$(top_srcdir)/config/amanda/bsdtcp-security.m4 \
	$(top_srcdir)/config/amanda/bsdudp-security.m4 \
	$(top_srcdir)/config/amanda/components.m4 \
	$(top_srcdir)/config/amanda/compress.m4 \
	$(top_srcdir)/config/amanda/config.m4 \
	$(top_srcdir)/config/amanda/debugging.m4 \
	$(top_srcdir)/config/amanda/defaults.m4 \
	$(top_srcdir)/config/amanda/devprefix.m4 \
	$(top_srcdir)/config/amanda/dirs.m4 \
	$(top_srcdir)/config/amanda/documentation.m4 \
	$(top_srcdir)/config/amanda/dumpers.m4 \
	$(top_srcdir)/config/amanda/dvdrw-device.m4 \
	$(top_srcdir)/config/amanda/flags.m4 \
	$(top_srcdir)/config/amanda/flock.m4 \
	$(top_srcdir)/config/amanda/funcs.m4 \
	$(top_srcdir)/config/amanda/getfsent.m4 \
	$(top_srcdir)/config/amanda/i18n.m4 \
	$(top_srcdir)/config/amanda/ipv6.m4 \
	$(top_srcdir)/config/amanda/krb5-security.m4 \
	$(top_srcdir)/config/amanda/lfs.m4 \
	$(top_srcdir)/config/amanda/libs.m4 \
	$(top_srcdir)/config/amanda/ndmp-device.m4 \
	$(top_srcdir)/config/amanda/net.m4 \
	$(top_srcdir)/config/amanda/progs.m4 \
	$(top_srcdir)/config/amanda/ps.m4 \
	$(top_srcdir)/config/amanda/readdir.m4 \
	$(top_srcdir)/config/amanda/readline.m4 \
	$(top_srcdir)/config/amanda/rsh-security.m4 \
	$(top_srcdir)/config/amanda/s3-device.m4 \
	$(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
	$(top_srcdir)/config/amanda/ssh-security.m4 \
	$(top_srcdir)/config/amanda/summary.m4 \
	$(top_srcdir)/config/amanda/swig.m4 \
	$(top_srcdir)/config/amanda/syshacks.m4 \
	$(top_srcdir)/config/amanda/tape.m4 \
	$(top_srcdir)/config/amanda/types.m4 \
	$(top_srcdir)/config/amanda/userid.m4 \
	$(top_srcdir)/config/amanda/version.m4 \
	$(top_srcdir)/config/gnulib/00gnulib.m4 \
	$(top_srcdir)/config/gnulib/alloca.m4 \
	$(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
	$(top_srcdir)/config/gnulib/asm-underscore.m4 \
	$(top_srcdir)/config/gnulib/base64.m4 \
	$(top_srcdir)/config/gnulib/btowc.m4 \
	$(top_srcdir)/config/gnulib/dos.m4 \
	$(top_srcdir)/config/gnulib/environ.m4 \
	$(top_srcdir)/config/gnulib/errno_h.m4 \
	$(top_srcdir)/config/gnulib/extensions.m4 \
	$(top_srcdir)/config/gnulib/fcntl-o.m4 \
	$(top_srcdir)/config/gnulib/float_h.m4 \
	$(top_srcdir)/config/gnulib/fseeko.m4 \
	$(top_srcdir)/config/gnulib/fsusage.m4 \
	$(top_srcdir)/config/gnulib/ftello.m4 \
	$(top_srcdir)/config/gnulib/ftruncate.m4 \
	$(top_srcdir)/config/gnulib/getaddrinfo.m4 \
	$(top_srcdir)/config/gnulib/getopt.m4 \
	$(top_srcdir)/config/gnulib/gettimeofday.m4 \
	$(top_srcdir)/config/gnulib/gnulib-common.m4 \
	$(top_srcdir)/config/gnulib/gnulib-comp.m4 \
	$(top_srcdir)/config/gnulib/hostent.m4 \
	$(top_srcdir)/config/gnulib/include_next.m4 \
	$(top_srcdir)/config/gnulib/inet_ntop.m4 \
	$(top_srcdir)/config/gnulib/inet_pton.m4 \
	$(top_srcdir)/config/gnulib/intmax_t.m4 \
	$(top_srcdir)/config/gnulib/langinfo_h.m4 \
	$(top_srcdir)/config/gnulib/localcharset.m4 \
	$(top_srcdir)/config/gnulib/locale-fr.m4 \
	$(top_srcdir)/config/gnulib/locale-ja.m4 \
	$(top_srcdir)/config/gnulib/locale-zh.m4 \
	$(top_srcdir)/config/gnulib/lock.m4 \
	$(top_srcdir)/config/gnulib/longlong.m4 \
	$(top_srcdir)/config/gnulib/lseek.m4 \
	$(top_srcdir)/config/gnulib/lstat.m4 \
	$(top_srcdir)/config/gnulib/malloc.m4 \
	$(top_srcdir)/config/gnulib/mbrtowc.m4 \
	$(top_srcdir)/config/gnulib/mbsinit.m4 \
	$(top_srcdir)/config/gnulib/mbstate_t.m4 \
	$(top_srcdir)/config/gnulib/memchr.m4 \
	$(top_srcdir)/config/gnulib/mkdtemp.m4 \
	$(top_srcdir)/config/gnulib/mmap-anon.m4 \
	$(top_srcdir)/config/gnulib/multiarch.m4 \
	$(top_srcdir)/config/gnulib/netdb_h.m4 \
	$(top_srcdir)/config/gnulib/netinet_in_h.m4 \
	$(top_srcdir)/config/gnulib/nl_langinfo.m4 \
	$(top_srcdir)/config/gnulib/onceonly.m4 \
	$(top_srcdir)/config/gnulib/physmem.m4 \
	$(top_srcdir)/config/gnulib/printf.m4 \
	$(top_srcdir)/config/gnulib/regex.m4 \
	$(top_srcdir)/config/gnulib/safe-read.m4 \
	$(top_srcdir)/config/gnulib/safe-write.m4 \
	$(top_srcdir)/config/gnulib/servent.m4 \
	$(top_srcdir)/config/gnulib/snprintf.m4 \
	$(top_srcdir)/config/gnulib/socklen.m4 \
	$(top_srcdir)/config/gnulib/sockpfaf.m4 \
	$(top_srcdir)/config/gnulib/ssize_t.m4 \
	$(top_srcdir)/config/gnulib/stat.m4 \
	$(top_srcdir)/config/gnulib/stdbool.m4 \
	$(top_srcdir)/config/gnulib/stddef_h.m4 \
	$(top_srcdir)/config/gnulib/stdint.m4 \
	$(top_srcdir)/config/gnulib/stdio_h.m4 \
	$(top_srcdir)/config/gnulib/stdlib_h.m4 \
	$(top_srcdir)/config/gnulib/string_h.m4 \
	$(top_srcdir)/config/gnulib/sys_socket_h.m4 \
	$(top_srcdir)/config/gnulib/sys_stat_h.m4 \
	$(top_srcdir)/config/gnulib/sys_time_h.m4 \
	$(top_srcdir)/config/gnulib/tempname.m4 \
	$(top_srcdir)/config/gnulib/threadlib.m4 \
	$(top_srcdir)/config/gnulib/time_h.m4 \
	$(top_srcdir)/config/gnulib/unistd_h.m4 \
	$(top_srcdir)/config/gnulib/vasnprintf.m4 \
	$(top_srcdir)/config/gnulib/warn-on-use.m4 \
	$(top_srcdir)/config/gnulib/wchar_h.m4 \
	$(top_srcdir)/config/gnulib/wcrtomb.m4 \
	$(top_srcdir)/config/gnulib/wctype_h.m4 \
	$(top_srcdir)/config/gnulib/write.m4 \
	$(top_srcdir)/config/gettext-macros/codeset.m4 \
	$(top_srcdir)/config/gettext-macros/gettext.m4 \
	$(top_srcdir)/config/gettext-macros/glibc21.m4 \
	$(top_srcdir)/config/gettext-macros/iconv.m4 \
	$(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
	$(top_srcdir)/config/gettext-macros/lib-ld.m4 \
	$(top_srcdir)/config/gettext-macros/lib-link.m4 \
	$(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
	$(top_srcdir)/config/gettext-macros/nls.m4 \
	$(top_srcdir)/config/gettext-macros/po.m4 \
	$(top_srcdir)/config/gettext-macros/progtest.m4 \
	$(top_srcdir)/config/gettext-macros/size_max.m4 \
	$(top_srcdir)/config/gettext-macros/stdint_h.m4 \
	$(top_srcdir)/config/gettext-macros/wchar_t.m4 \
	$(top_srcdir)/config/gettext-macros/wint_t.m4 \
	$(top_srcdir)/config/gettext-macros/xsize.m4 \
	$(top_srcdir)/config/libtool.m4 \
	$(top_srcdir)/config/ltoptions.m4 \
	$(top_srcdir)/config/ltsugar.m4 \
	$(top_srcdir)/config/ltversion.m4 \
	$(top_srcdir)/config/lt~obsolete.m4 $(top_srcdir)/FULL_VERSION \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(pkgdatadir)"
DATA = $(pkgdata_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = . gnulib config common-src amar-src amandad-src \
	xfer-src ndmp-src client-src application-src device-src \
	server-src changer-src recover-src oldrecover-src amplot perl \
	po man example packaging installcheck
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AIX_BACKUP = @AIX_BACKUP@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMANDA_COMPONENTS = @AMANDA_COMPONENTS@
AMANDA_DBGDIR = @AMANDA_DBGDIR@
AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
AMANDA_SWIG_PERL_CFLAGS = @AMANDA_SWIG_PERL_CFLAGS@
AMANDA_TMPDIR = @AMANDA_TMPDIR@
AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
AMLINT = @AMLINT@
AMLINTFLAGS = @AMLINTFLAGS@
AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
AMTAR = @AMTAR@
APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
APPLICATION_DIR = @APPLICATION_DIR@
AR = @AR@
ASM_SYMBOL_PREFIX = @ASM_SYMBOL_PREFIX@
ASSERTIONS = @ASSERTIONS@
AS_NEEDED_FLAGS = @AS_NEEDED_FLAGS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASH = @BASH@
BINARY_OWNER = @BINARY_OWNER@
BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
BSDTCP_SECURITY = @BSDTCP_SECURITY@
BSDUDP_SECURITY = @BSDUDP_SECURITY@
BSD_SECURITY = @BSD_SECURITY@
CAT = @CAT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHECK_USERID = @CHECK_USERID@
CLIENT_LOGIN = @CLIENT_LOGIN@
CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
COMPRESS = @COMPRESS@
COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
COMPRESS_PATH = @COMPRESS_PATH@
COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
CONFIG_DIR = @CONFIG_DIR@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DD = @DD@
DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
DEFAULT_CONFIG = @DEFAULT_CONFIG@
DEFAULT_MAILER = @DEFAULT_MAILER@
DEFAULT_SERVER = @DEFAULT_SERVER@
DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOC_BUILD_DATE = @DOC_BUILD_DATE@
DSYMUTIL = @DSYMUTIL@
DUMP = @DUMP@
DUMPBIN = @DUMPBIN@
DUMP_RETURNS_1 = @DUMP_RETURNS_1@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
ENOLINK_VALUE = @ENOLINK_VALUE@
EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
ERRNO_H = @ERRNO_H@
EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FLOAT_H = @FLOAT_H@
GETADDRINFO_LIB = @GETADDRINFO_LIB@
GETCONF = @GETCONF@
GETOPT_H = @GETOPT_H@
GETTEXT = @GETTEXT@
GIT = @GIT@
GLIBC21 = @GLIBC21@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GNULIB_ACCEPT = @GNULIB_ACCEPT@
GNULIB_ACCEPT4 = @GNULIB_ACCEPT4@
GNULIB_ATOLL = @GNULIB_ATOLL@
GNULIB_BIND = @GNULIB_BIND@
GNULIB_BTOWC = @GNULIB_BTOWC@
GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
GNULIB_CHOWN = @GNULIB_CHOWN@
GNULIB_CLOSE = @GNULIB_CLOSE@
GNULIB_CONNECT = @GNULIB_CONNECT@
GNULIB_DPRINTF = @GNULIB_DPRINTF@
GNULIB_DUP2 = @GNULIB_DUP2@
GNULIB_DUP3 = @GNULIB_DUP3@
GNULIB_ENVIRON = @GNULIB_ENVIRON@
GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
GNULIB_FCHDIR = @GNULIB_FCHDIR@
GNULIB_FCHMODAT = @GNULIB_FCHMODAT@
GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
GNULIB_FCLOSE = @GNULIB_FCLOSE@
GNULIB_FFLUSH = @GNULIB_FFLUSH@
GNULIB_FOPEN = @GNULIB_FOPEN@
GNULIB_FPRINTF = @GNULIB_FPRINTF@
GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
GNULIB_FPURGE = @GNULIB_FPURGE@
GNULIB_FPUTC = @GNULIB_FPUTC@
GNULIB_FPUTS = @GNULIB_FPUTS@
GNULIB_FREOPEN = @GNULIB_FREOPEN@
GNULIB_FSEEK = @GNULIB_FSEEK@
GNULIB_FSEEKO = @GNULIB_FSEEKO@
GNULIB_FSTATAT = @GNULIB_FSTATAT@
GNULIB_FSYNC = @GNULIB_FSYNC@
GNULIB_FTELL = @GNULIB_FTELL@
GNULIB_FTELLO = @GNULIB_FTELLO@
GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
GNULIB_FUTIMENS = @GNULIB_FUTIMENS@
GNULIB_FWRITE = @GNULIB_FWRITE@
GNULIB_GETADDRINFO = @GNULIB_GETADDRINFO@
GNULIB_GETCWD = @GNULIB_GETCWD@
GNULIB_GETDELIM = @GNULIB_GETDELIM@
GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
GNULIB_GETLINE = @GNULIB_GETLINE@
GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
GNULIB_GETPEERNAME = @GNULIB_GETPEERNAME@
GNULIB_GETSOCKNAME = @GNULIB_GETSOCKNAME@
GNULIB_GETSOCKOPT = @GNULIB_GETSOCKOPT@
GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@
GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
GNULIB_GRANTPT = @GNULIB_GRANTPT@
GNULIB_INET_NTOP = @GNULIB_INET_NTOP@
GNULIB_INET_PTON = @GNULIB_INET_PTON@
GNULIB_LCHMOD = @GNULIB_LCHMOD@
GNULIB_LCHOWN = @GNULIB_LCHOWN@
GNULIB_LINK = @GNULIB_LINK@
GNULIB_LINKAT = @GNULIB_LINKAT@
GNULIB_LISTEN = @GNULIB_LISTEN@
GNULIB_LSEEK = @GNULIB_LSEEK@
GNULIB_LSTAT = @GNULIB_LSTAT@
GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
GNULIB_MBRLEN = @GNULIB_MBRLEN@
GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
GNULIB_MBSCHR = @GNULIB_MBSCHR@
GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
GNULIB_MBSINIT = @GNULIB_MBSINIT@
GNULIB_MBSLEN = @GNULIB_MBSLEN@
GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
GNULIB_MBSSEP = @GNULIB_MBSSEP@
GNULIB_MBSSPN = @GNULIB_MBSSPN@
GNULIB_MBSSTR = @GNULIB_MBSSTR@
GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
GNULIB_MEMCHR = @GNULIB_MEMCHR@
GNULIB_MEMMEM = @GNULIB_MEMMEM@
GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
GNULIB_MKDIRAT = @GNULIB_MKDIRAT@
GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
GNULIB_MKFIFO = @GNULIB_MKFIFO@
GNULIB_MKFIFOAT = @GNULIB_MKFIFOAT@
GNULIB_MKNOD = @GNULIB_MKNOD@
GNULIB_MKNODAT = @GNULIB_MKNODAT@
GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
GNULIB_MKTIME = @GNULIB_MKTIME@
GNULIB_NANOSLEEP = @GNULIB_NANOSLEEP@
GNULIB_NL_LANGINFO = @GNULIB_NL_LANGINFO@
GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
GNULIB_PERROR = @GNULIB_PERROR@
GNULIB_PIPE2 = @GNULIB_PIPE2@
GNULIB_POPEN = @GNULIB_POPEN@
GNULIB_PREAD = @GNULIB_PREAD@
GNULIB_PRINTF = @GNULIB_PRINTF@
GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
GNULIB_PTSNAME = @GNULIB_PTSNAME@
GNULIB_PUTC = @GNULIB_PUTC@
GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
GNULIB_PUTENV = @GNULIB_PUTENV@
GNULIB_PUTS = @GNULIB_PUTS@
GNULIB_PWRITE = @GNULIB_PWRITE@
GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
GNULIB_READLINK = @GNULIB_READLINK@
GNULIB_READLINKAT = @GNULIB_READLINKAT@
GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
GNULIB_REALPATH = @GNULIB_REALPATH@
GNULIB_RECV = @GNULIB_RECV@
GNULIB_RECVFROM = @GNULIB_RECVFROM@
GNULIB_REMOVE = @GNULIB_REMOVE@
GNULIB_RENAME = @GNULIB_RENAME@
GNULIB_RENAMEAT = @GNULIB_RENAMEAT@
GNULIB_RMDIR = @GNULIB_RMDIR@
GNULIB_RPMATCH = @GNULIB_RPMATCH@
GNULIB_SEND = @GNULIB_SEND@
GNULIB_SENDTO = @GNULIB_SENDTO@
GNULIB_SETENV = @GNULIB_SETENV@
GNULIB_SETSOCKOPT = @GNULIB_SETSOCKOPT@
GNULIB_SHUTDOWN = @GNULIB_SHUTDOWN@
GNULIB_SLEEP = @GNULIB_SLEEP@
GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
GNULIB_SOCKET = @GNULIB_SOCKET@
GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
GNULIB_STAT = @GNULIB_STAT@
GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
GNULIB_STPCPY = @GNULIB_STPCPY@
GNULIB_STPNCPY = @GNULIB_STPNCPY@
GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
GNULIB_STRDUP = @GNULIB_STRDUP@
GNULIB_STRERROR = @GNULIB_STRERROR@
GNULIB_STRNCAT = @GNULIB_STRNCAT@
GNULIB_STRNDUP = @GNULIB_STRNDUP@
GNULIB_STRNLEN = @GNULIB_STRNLEN@
GNULIB_STRPBRK = @GNULIB_STRPBRK@
GNULIB_STRPTIME = @GNULIB_STRPTIME@
GNULIB_STRSEP = @GNULIB_STRSEP@
GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
GNULIB_STRSTR = @GNULIB_STRSTR@
GNULIB_STRTOD = @GNULIB_STRTOD@
GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
GNULIB_STRTOLL = @GNULIB_STRTOLL@
GNULIB_STRTOULL = @GNULIB_STRTOULL@
GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
GNULIB_SYMLINK = @GNULIB_SYMLINK@
GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
GNULIB_TIMEGM = @GNULIB_TIMEGM@
GNULIB_TIME_R = @GNULIB_TIME_R@
GNULIB_TMPFILE = @GNULIB_TMPFILE@
GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
GNULIB_UNISTD_H_GETOPT = @GNULIB_UNISTD_H_GETOPT@
GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
GNULIB_UNLINK = @GNULIB_UNLINK@
GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
GNULIB_UNSETENV = @GNULIB_UNSETENV@
GNULIB_USLEEP = @GNULIB_USLEEP@
GNULIB_UTIMENSAT = @GNULIB_UTIMENSAT@
GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
GNULIB_VPRINTF = @GNULIB_VPRINTF@
GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
GNULIB_WCTOB = @GNULIB_WCTOB@
GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
GNULIB_WRITE = @GNULIB_WRITE@
GNULIB__EXIT = @GNULIB__EXIT@
GNUPLOT = @GNUPLOT@
GNUTAR = @GNUTAR@
GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
GOBJECT_QUERY = @GOBJECT_QUERY@
GREP = @GREP@
GZIP = @GZIP@
HAVE_ACCEPT4 = @HAVE_ACCEPT4@
HAVE_ARPA_INET_H = @HAVE_ARPA_INET_H@
HAVE_ATOLL = @HAVE_ATOLL@
HAVE_BTOWC = @HAVE_BTOWC@
HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
HAVE_CHOWN = @HAVE_CHOWN@
HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@
HAVE_DECL_FREEADDRINFO = @HAVE_DECL_FREEADDRINFO@
HAVE_DECL_GAI_STRERROR = @HAVE_DECL_GAI_STRERROR@
HAVE_DECL_GETADDRINFO = @HAVE_DECL_GETADDRINFO@
HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
HAVE_DECL_GETNAMEINFO = @HAVE_DECL_GETNAMEINFO@
HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
HAVE_DECL_INET_NTOP = @HAVE_DECL_INET_NTOP@
HAVE_DECL_INET_PTON = @HAVE_DECL_INET_PTON@
HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
HAVE_DPRINTF = @HAVE_DPRINTF@
HAVE_DUP2 = @HAVE_DUP2@
HAVE_DUP3 = @HAVE_DUP3@
HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
HAVE_FACCESSAT = @HAVE_FACCESSAT@
HAVE_FCHDIR = @HAVE_FCHDIR@
HAVE_FCHMODAT = @HAVE_FCHMODAT@
HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
HAVE_FSEEKO = @HAVE_FSEEKO@
HAVE_FSTATAT = @HAVE_FSTATAT@
HAVE_FSYNC = @HAVE_FSYNC@
HAVE_FTELLO = @HAVE_FTELLO@
HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
HAVE_FUTIMENS = @HAVE_FUTIMENS@
HAVE_GETDOMAINNAME = @HAVE_GETDOMAINNAME@
HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
HAVE_GETGROUPS = @HAVE_GETGROUPS@
HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
HAVE_GETLOGIN = @HAVE_GETLOGIN@
HAVE_GETOPT_H = @HAVE_GETOPT_H@
HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
HAVE_GETTIMEOFDAY = @HAVE_GETTIMEOFDAY@
HAVE_GRANTPT = @HAVE_GRANTPT@
HAVE_GZIP = @HAVE_GZIP@
HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
HAVE_ISWBLANK = @HAVE_ISWBLANK@
HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
HAVE_LANGINFO_CODESET = @HAVE_LANGINFO_CODESET@
HAVE_LANGINFO_ERA = @HAVE_LANGINFO_ERA@
HAVE_LANGINFO_H = @HAVE_LANGINFO_H@
HAVE_LCHMOD = @HAVE_LCHMOD@
HAVE_LCHOWN = @HAVE_LCHOWN@
HAVE_LINK = @HAVE_LINK@
HAVE_LINKAT = @HAVE_LINKAT@
HAVE_LOCALTIME_R = @HAVE_LOCALTIME_R@
HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
HAVE_LSTAT = @HAVE_LSTAT@
HAVE_MBRLEN = @HAVE_MBRLEN@
HAVE_MBRTOWC = @HAVE_MBRTOWC@
HAVE_MBSINIT = @HAVE_MBSINIT@
HAVE_MBSLEN = @HAVE_MBSLEN@
HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
HAVE_MEMCHR = @HAVE_MEMCHR@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
HAVE_MKDIRAT = @HAVE_MKDIRAT@
HAVE_MKDTEMP = @HAVE_MKDTEMP@
HAVE_MKFIFO = @HAVE_MKFIFO@
HAVE_MKFIFOAT = @HAVE_MKFIFOAT@
HAVE_MKNOD = @HAVE_MKNOD@
HAVE_MKNODAT = @HAVE_MKNODAT@
HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
HAVE_MKSTEMP = @HAVE_MKSTEMP@
HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
HAVE_NANOSLEEP = @HAVE_NANOSLEEP@
HAVE_NETDB_H = @HAVE_NETDB_H@
HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
HAVE_NL_LANGINFO = @HAVE_NL_LANGINFO@
HAVE_OS_H = @HAVE_OS_H@
HAVE_PIPE2 = @HAVE_PIPE2@
HAVE_PREAD = @HAVE_PREAD@
HAVE_PTSNAME = @HAVE_PTSNAME@
HAVE_PWRITE = @HAVE_PWRITE@
HAVE_RANDOM_H = @HAVE_RANDOM_H@
HAVE_RANDOM_R = @HAVE_RANDOM_R@
HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
HAVE_READLINK = @HAVE_READLINK@
HAVE_READLINKAT = @HAVE_READLINKAT@
HAVE_REALPATH = @HAVE_REALPATH@
HAVE_RENAMEAT = @HAVE_RENAMEAT@
HAVE_RPMATCH = @HAVE_RPMATCH@
HAVE_SA_FAMILY_T = @HAVE_SA_FAMILY_T@
HAVE_SETENV = @HAVE_SETENV@
HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
HAVE_SLEEP = @HAVE_SLEEP@
HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRPBRK = @HAVE_STRPBRK@
HAVE_STRPTIME = @HAVE_STRPTIME@
HAVE_STRSEP = @HAVE_STRSEP@
HAVE_STRTOD = @HAVE_STRTOD@
HAVE_STRTOLL = @HAVE_STRTOLL@
HAVE_STRTOULL = @HAVE_STRTOULL@
HAVE_STRUCT_ADDRINFO = @HAVE_STRUCT_ADDRINFO@
HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
HAVE_STRUCT_SOCKADDR_STORAGE = @HAVE_STRUCT_SOCKADDR_STORAGE@
HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
HAVE_SYMLINK = @HAVE_SYMLINK@
HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
HAVE_TIMEGM = @HAVE_TIMEGM@
HAVE_TTYNAME_R = @HAVE_TTYNAME_R@
HAVE_UNISTD_H = @HAVE_UNISTD_H@
HAVE_UNLINKAT = @HAVE_UNLINKAT@
HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
HAVE_UNSETENV = @HAVE_UNSETENV@
HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
HAVE_USLEEP = @HAVE_USLEEP@
HAVE_UTIMENSAT = @HAVE_UTIMENSAT@
HAVE_VASPRINTF = @HAVE_VASPRINTF@
HAVE_VDPRINTF = @HAVE_VDPRINTF@
HAVE_WCHAR_H = @HAVE_WCHAR_H@
HAVE_WCHAR_T = @HAVE_WCHAR_T@
HAVE_WCRTOMB = @HAVE_WCRTOMB@
HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
HAVE_WINT_T = @HAVE_WINT_T@
HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
HAVE__BOOL = @HAVE__BOOL@
HAVE__EXIT = @HAVE__EXIT@
HOSTENT_LIB = @HOSTENT_LIB@
INCLUDE_NEXT = @INCLUDE_NEXT@
INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
INET_NTOP_LIB = @INET_NTOP_LIB@
INET_PTON_LIB = @INET_PTON_LIB@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KRB5_SECURITY = @KRB5_SECURITY@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURL = @LIBCURL@
LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBMULTITHREAD = @LIBMULTITHREAD@
LIBOBJS = @LIBOBJS@
LIBPTH = @LIBPTH@
LIBS = @LIBS@
LIBTHREAD = @LIBTHREAD@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
LOCALE_FR = @LOCALE_FR@
LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
LOCALE_JA = @LOCALE_JA@
LOCALE_ZH_CN = @LOCALE_ZH_CN@
LOCKING = @LOCKING@
LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
LPR = @LPR@
LPRFLAG = @LPRFLAG@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
LTLIBOBJS = @LTLIBOBJS@
LTLIBPTH = @LTLIBPTH@
LTLIBTHREAD = @LTLIBTHREAD@
MAILER = @MAILER@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MOUNT = @MOUNT@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
MT = @MT@
MTX = @MTX@
MT_FILE_FLAG = @MT_FILE_FLAG@
NC = @NC@
NC6 = @NC6@
NETCAT = @NETCAT@
NETINET_IN_H = @NETINET_IN_H@
NEXT_ARPA_INET_H = @NEXT_ARPA_INET_H@
NEXT_AS_FIRST_DIRECTIVE_ARPA_INET_H = @NEXT_AS_FIRST_DIRECTIVE_ARPA_INET_H@
NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@
NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H = @NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H@
NEXT_AS_FIRST_DIRECTIVE_NETDB_H = @NEXT_AS_FIRST_DIRECTIVE_NETDB_H@
NEXT_AS_FIRST_DIRECTIVE_NETINET_IN_H = @NEXT_AS_FIRST_DIRECTIVE_NETINET_IN_H@
NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@
NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H@
NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@
NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H@
NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@
NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
NEXT_ERRNO_H = @NEXT_ERRNO_H@
NEXT_FLOAT_H = @NEXT_FLOAT_H@
NEXT_GETOPT_H = @NEXT_GETOPT_H@
NEXT_LANGINFO_H = @NEXT_LANGINFO_H@
NEXT_NETDB_H = @NEXT_NETDB_H@
NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
NEXT_STDDEF_H = @NEXT_STDDEF_H@
NEXT_STDINT_H = @NEXT_STDINT_H@
NEXT_STDIO_H = @NEXT_STDIO_H@
NEXT_STDLIB_H = @NEXT_STDLIB_H@
NEXT_STRING_H = @NEXT_STRING_H@
NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
NEXT_TIME_H = @NEXT_TIME_H@
NEXT_UNISTD_H = @NEXT_UNISTD_H@
NEXT_WCHAR_H = @NEXT_WCHAR_H@
NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PCAT = @PCAT@
PERL = @PERL@
PERLEXTLIBS = @PERLEXTLIBS@
PERL_INC = @PERL_INC@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
PS = @PS@
PS_ARGUMENT = @PS_ARGUMENT@
PS_ARGUMENT_ARGS = @PS_ARGUMENT_ARGS@
PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@
PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
REPLACE_BTOWC = @REPLACE_BTOWC@
REPLACE_CALLOC = @REPLACE_CALLOC@
REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
REPLACE_CHOWN = @REPLACE_CHOWN@
REPLACE_CLOSE = @REPLACE_CLOSE@
REPLACE_DPRINTF = @REPLACE_DPRINTF@
REPLACE_DUP = @REPLACE_DUP@
REPLACE_DUP2 = @REPLACE_DUP2@
REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
REPLACE_FCLOSE = @REPLACE_FCLOSE@
REPLACE_FFLUSH = @REPLACE_FFLUSH@
REPLACE_FOPEN = @REPLACE_FOPEN@
REPLACE_FPRINTF = @REPLACE_FPRINTF@
REPLACE_FPURGE = @REPLACE_FPURGE@
REPLACE_FREOPEN = @REPLACE_FREOPEN@
REPLACE_FSEEK = @REPLACE_FSEEK@
REPLACE_FSEEKO = @REPLACE_FSEEKO@
REPLACE_FSTAT = @REPLACE_FSTAT@
REPLACE_FSTATAT = @REPLACE_FSTATAT@
REPLACE_FTELL = @REPLACE_FTELL@
REPLACE_FTELLO = @REPLACE_FTELLO@
REPLACE_FUTIMENS = @REPLACE_FUTIMENS@
REPLACE_GETCWD = @REPLACE_GETCWD@
REPLACE_GETDELIM = @REPLACE_GETDELIM@
REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
REPLACE_GETLINE = @REPLACE_GETLINE@
REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
REPLACE_LCHOWN = @REPLACE_LCHOWN@
REPLACE_LINK = @REPLACE_LINK@
REPLACE_LINKAT = @REPLACE_LINKAT@
REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
REPLACE_LSEEK = @REPLACE_LSEEK@
REPLACE_LSTAT = @REPLACE_LSTAT@
REPLACE_MALLOC = @REPLACE_MALLOC@
REPLACE_MBRLEN = @REPLACE_MBRLEN@
REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
REPLACE_MBSINIT = @REPLACE_MBSINIT@
REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
REPLACE_MEMCHR = @REPLACE_MEMCHR@
REPLACE_MEMMEM = @REPLACE_MEMMEM@
REPLACE_MKDIR = @REPLACE_MKDIR@
REPLACE_MKFIFO = @REPLACE_MKFIFO@
REPLACE_MKNOD = @REPLACE_MKNOD@
REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
REPLACE_MKTIME = @REPLACE_MKTIME@
REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
REPLACE_NL_LANGINFO = @REPLACE_NL_LANGINFO@
REPLACE_NULL = @REPLACE_NULL@
REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
REPLACE_PERROR = @REPLACE_PERROR@
REPLACE_POPEN = @REPLACE_POPEN@
REPLACE_PREAD = @REPLACE_PREAD@
REPLACE_PRINTF = @REPLACE_PRINTF@
REPLACE_PUTENV = @REPLACE_PUTENV@
REPLACE_PWRITE = @REPLACE_PWRITE@
REPLACE_READLINK = @REPLACE_READLINK@
REPLACE_REALLOC = @REPLACE_REALLOC@
REPLACE_REALPATH = @REPLACE_REALPATH@
REPLACE_REMOVE = @REPLACE_REMOVE@
REPLACE_RENAME = @REPLACE_RENAME@
REPLACE_RENAMEAT = @REPLACE_RENAMEAT@
REPLACE_RMDIR = @REPLACE_RMDIR@
REPLACE_SETENV = @REPLACE_SETENV@
REPLACE_SLEEP = @REPLACE_SLEEP@
REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
REPLACE_SPRINTF = @REPLACE_SPRINTF@
REPLACE_STAT = @REPLACE_STAT@
REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
REPLACE_STPNCPY = @REPLACE_STPNCPY@
REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
REPLACE_STRDUP = @REPLACE_STRDUP@
REPLACE_STRERROR = @REPLACE_STRERROR@
REPLACE_STRNCAT = @REPLACE_STRNCAT@
REPLACE_STRNDUP = @REPLACE_STRNDUP@
REPLACE_STRNLEN = @REPLACE_STRNLEN@
REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
REPLACE_STRSTR = @REPLACE_STRSTR@
REPLACE_STRTOD = @REPLACE_STRTOD@
REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
REPLACE_SYMLINK = @REPLACE_SYMLINK@
REPLACE_TIMEGM = @REPLACE_TIMEGM@
REPLACE_TMPFILE = @REPLACE_TMPFILE@
REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
REPLACE_UNLINK = @REPLACE_UNLINK@
REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
REPLACE_UNSETENV = @REPLACE_UNSETENV@
REPLACE_USLEEP = @REPLACE_USLEEP@
REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@
REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
REPLACE_VPRINTF = @REPLACE_VPRINTF@
REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
REPLACE_WCTOB = @REPLACE_WCTOB@
REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
REPLACE_WRITE = @REPLACE_WRITE@
RESTORE = @RESTORE@
RPCGEN = @RPCGEN@
RSH_SECURITY = @RSH_SECURITY@
SAMBA_CLIENT = @SAMBA_CLIENT@
SED = @SED@
SERVENT_LIB = @SERVENT_LIB@
SERVICE_SUFFIX = @SERVICE_SUFFIX@
SETUID_GROUP = @SETUID_GROUP@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
SORT = @SORT@
SSH = @SSH@
SSH_SECURITY = @SSH_SECURITY@
STAR = @STAR@
STDBOOL_H = @STDBOOL_H@
STDDEF_H = @STDDEF_H@
STDINT_H = @STDINT_H@
STRIP = @STRIP@
SUNTAR = @SUNTAR@
SVN = @SVN@
SWIG = @SWIG@
SWIG_LIB = @SWIG_LIB@
SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
TCPPORTRANGE = @TCPPORTRANGE@
TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
UDPPORTRANGE = @UDPPORTRANGE@
UMOUNT = @UMOUNT@
UNAME = @UNAME@
UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
USE_NLS = @USE_NLS@
USE_RUNDUMP = @USE_RUNDUMP@
VDUMP = @VDUMP@
VERSION = @VERSION@
VERSION_COMMENT = @VERSION_COMMENT@
VERSION_MAJOR = @VERSION_MAJOR@
VERSION_MINOR = @VERSION_MINOR@
VERSION_PATCH = @VERSION_PATCH@
VRESTORE = @VRESTORE@
VXDUMP = @VXDUMP@
VXRESTORE = @VXRESTORE@
WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
WINT_T_SUFFIX = @WINT_T_SUFFIX@
XFSDUMP = @XFSDUMP@
XFSRESTORE = @XFSRESTORE@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XSLREL = @XSLREL@
XSLTPROC = @XSLTPROC@
XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
YACC = @YACC@
YFLAGS = @YFLAGS@
_libcurl_config = @_libcurl_config@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
amdatadir = @amdatadir@
amincludedir = @amincludedir@
amlibdir = @amlibdir@
amlibexecdir = @amlibexecdir@
amperldir = @amperldir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
gltests_LIBOBJS = @gltests_LIBOBJS@
gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
gltests_WITNESS = @gltests_WITNESS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = 1.10 foreign
SUFFIXES = 
EXTRA_DIST = $(SNAPSHOT_STAMP) $(pkgdata_DATA) autogen contrib/README \
	contrib/dbbackup.README contrib/dbbackup.ksh \
	contrib/dbbackup.sql contrib/dbbackup.tcl contrib/mkamandisk \
	contrib/set_prod_link.pl contrib/gsc/README \
	contrib/gsc/cfggsc.c contrib/gsc/defgsc.c contrib/gsc/gsc.add \
	contrib/gsc/gscdd.c contrib/gsc/gscdds.h contrib/gsc/makefile \
	contrib/gsc/tstinq.c contrib/gsc/ucfggsc.c \
	patches/regex-3.6alpha.patch patches/samba-largefs.patch \
	patches/tar-1.12.patch UPGRADING DEVELOPING VERSION \
	FULL_VERSION
BUILT_SOURCES = 
MOSTLYCLEANFILES = 
CLEANFILES = 
DISTCLEANFILES = $(am__append_1)
MAINTAINERCLEANFILES = 

# sed expression to strip leading directories from a filename; this converts e.g.,
# src/foo/bar.so to bar.so.
strip_leading_dirs = s|^.*/||
@WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
@WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"


# define a snippet of the scripts below to either perform a chown/chmod operation,
# or record that operation in the logfile.  On entry to the snippet, $$dest is the
# destination directory, $$cmd is the srcdir-relative pathname of the target file,
# $$chown is the ownership, and $$chmod is the permission pattern.
@WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
@WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
@WANT_INSTALLPERMS_TRUE@	echo chown "$$chown" "$$pa"; \
@WANT_INSTALLPERMS_TRUE@	chown "$$chown" "$$pa" || exit 1; \
@WANT_INSTALLPERMS_TRUE@    fi; \
@WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
@WANT_INSTALLPERMS_TRUE@	echo chmod "$$chmod" "$$pa"; \
@WANT_INSTALLPERMS_TRUE@	chmod "$$chmod" "$$pa" || exit 1; \
@WANT_INSTALLPERMS_TRUE@    fi 

@WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
do_installperms = dest=; chown=; chmod=; \
	for cmd in $$installperms; do \
	    case "$$cmd" in \
		chown=amanda:setuid) \
		    echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
		chown=root:setuid) \
		    echo "  ($$cmd)"; chown="root:$(SETUID_GROUP)";; \
		dest=*|chown=*|chmod=*) \
			echo "  ($$cmd)"; eval $$cmd;; \
	    	*) $(do_file) ;; \
	    esac; \
	done

ACLOCAL_AMFLAGS = --force -I config -I . -I config/gettext-macros -I config/gnulib -I config/amanda -I config/macro-archive
@WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src application-src
@WANT_SERVER_TRUE@SERVER_SUBDIRS = device-src server-src changer-src
@WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src oldrecover-src
@WANT_AMPLOT_TRUE@PLOT_SUBDIRS = amplot
@WANT_NDMP_TRUE@NDMP_SUBDIRS = ndmp-src
# order is significant, don't change it arbitrarily
SUBDIRS = . \
	gnulib \
	config \
	common-src \
	amar-src \
	amandad-src \
	xfer-src \
	$(NDMP_SUBDIRS) \
	$(TAPE_SUBDIRS) \
	$(CLIENT_SUBDIRS) \
	$(SERVER_SUBDIRS) \
	$(RESTORE_SUBDIRS) \
	$(RECOVER_SUBDIRS) \
	$(PLOT_SUBDIRS) \
	perl \
	po \
	man \
	example \
	packaging \
	installcheck

pkgdata_DATA = \
	ReleaseNotes	\
	COPYRIGHT	\
	NEWS		\
	ChangeLog

CONFIG_STATUS = config.status

# ensure that configure gets the right arguments for distcheck; this keeps the
# user/group through to the distcheck, rather than defaulting back to 'amanda'.
DISTCHECK_CONFIGURE_FLAGS = --with-user=$(CLIENT_LOGIN) --with-group=$(SETUID_GROUP) --with-owner=$(BINARY_OWNER) --disable-installperms --without-amperldir --without-force-uid --with-tmpdir=$(AMANDA_TMPDIR) SINGLE_USERID=yes CLOBBER_MY_CONFIG=OK
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: 
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-pkgdataDATA: $(pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod u+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(pkgdatadir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local install-pkgdataDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-exec-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-pkgdataDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	ctags-recursive install install-am install-data-am \
	install-exec-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \
	dist-xz dist-zip distcheck distclean distclean-generic \
	distclean-libtool distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-hook install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-hook \
	install-exec-local install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-pkgdataDATA install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-pkgdataDATA


installperms-exec:
	@installperms="$(INSTALLPERMS_exec)"; \
	test -n "$$installperms" && echo "Setting installation permissions on executables"; \
	$(do_installperms)

installperms-data:
	@installperms="$(INSTALLPERMS_data)"; \
	test -n "$$installperms" && echo "Setting installation permissions on data"; \
	$(do_installperms)

install-exec-hook: installperms-exec
install-data-hook: installperms-data

# define a rule to initialize the installperms manifest file
@WANT_INSTALLPERMS_TRUE@installperms-init:
@WANT_INSTALLPERMS_FALSE@installperms-init:
@WANT_INSTALLPERMS_FALSE@	rm -f "$(installperms_sh)"

FULL_VERSION: VERSION
	$(srcdir)/config/set_full_version $(top_srcdir)

config.status: FULL_VERSION

libtool: $(LIBTOOL_DEPS)
	$(SHELL) ./config.status --recheck

# empty out the installperms manifest file when we start
install-exec-local: installperms-init
install-data-local: installperms-init
$(CONFIG_STATUS): $(SNAPSHOT_STAMP)
SNAPSHOT:
	: SNAPSHOT file was removed, will reconfigure...

lint:
	(cd amandad-src; make lint)
	(cd changer-src; make lint)
	(cd client-src; make lint)
	(cd common-src; make lint)
	(cd oldrecover-src; make lint)
	(cd recover-src; make lint)
	(cd server-src; make lint)
	(cd xfer-src; make lint)

dist-hook:
	find $(distdir)/. -name '*.test.c' -exec rm {} \;

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: