# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# vim:ft=automake
# Copyright (c) 2005-2008 Zmanda Inc.  All Rights Reserved.
# 
# This library is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License version 2.1 as 
# published by the Free Software Foundation.
# 
# This library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
# License for more details.
# 
# You should have received a copy of the GNU Lesser General Public License
# along with this library; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA.
# 
# Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com

# simple include file to pre-define variables which are then +='d by other
# scripts in this directory.

# vim:ft=automake
#
# Adjust post-install permissions settings.  This rule works off two
# specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data. 
# Each is a whitespace-separated list of commands, all of which are either
# a variable assignment or a filename.  Three variables are available:
#
#  - dest= sets the destination directory to e.g., $(sbindir)
#  - chown= controls changes in ownership; value is first argument to chown
#  - chmod= controls changes in permissions; value is first argument to chmod
#
# As a special case, chown=amanda is taken as equivalent to 
# chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
# whitespace in the user/group names.
# 
# when a filename is seen, the currently active variables are applied.
#
# Note that scripts are data, not executables!
#
# EXAMPLE
#
# sbin_PROGRAMS = foo bar bing
# libexec_PROGRAMS = pro gram
# sbin_SCRIPTS = sk ript
# INSTALLPERMS_exec = \
# 	dest=$(sbindir) chown=amanda chmod= \
# 		foo bar \
# 	chmod=07450 \
# 		bing
# 	dest=$(libexecdir) chmod= \
# 		$(libexec_PROGRAMS)
# INSTALLPERMS_data = \
# 	dest=$(sbindir) chown=amanda chmod= \
# 		$(sbin_SCRIPTS)
#
# This whole operation is not required when making builds for packaging,
# and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
# AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
# build directory is populated with a format suitable for shell interpretation,
# with lines like this:
#   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
# the arguments being, respectively, owner:group, mode, and filename.  There will
# be exactly one line for each file which has specific permissions.  The intention
# is that this file be used by packaging scripts to set correct permissions at install
# time.  Note that files which have no special permissions requirements do not appear 
# in this file at all, due to limitations of Automake.

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in \
	$(top_srcdir)/config/automake/installperms.am \
	$(top_srcdir)/config/automake/vars.am $(top_srcdir)/configure \
	$(top_srcdir)/example/template.d/advanced.conf.in \
	$(top_srcdir)/example/template.d/amanda-S3.conf.in \
	$(top_srcdir)/example/template.d/amanda-harddisk.conf.in \
	$(top_srcdir)/example/template.d/amanda-single-tape.conf.in \
	$(top_srcdir)/example/template.d/amanda-tape-changer.conf.in \
	AUTHORS ChangeLog INSTALL NEWS
@WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps =  \
	$(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
	$(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
	$(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
	$(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
	$(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
	$(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
	$(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
	$(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
	$(top_srcdir)/config/macro-archive/xsltproc.m4 \
	$(top_srcdir)/config/amanda/amplot.m4 \
	$(top_srcdir)/config/amanda/bsd-security.m4 \
	$(top_srcdir)/config/amanda/bsdtcp-security.m4 \
	$(top_srcdir)/config/amanda/bsdudp-security.m4 \
	$(top_srcdir)/config/amanda/changer.m4 \
	$(top_srcdir)/config/amanda/components.m4 \
	$(top_srcdir)/config/amanda/compress.m4 \
	$(top_srcdir)/config/amanda/config.m4 \
	$(top_srcdir)/config/amanda/debugging.m4 \
	$(top_srcdir)/config/amanda/defaults.m4 \
	$(top_srcdir)/config/amanda/devprefix.m4 \
	$(top_srcdir)/config/amanda/dirs.m4 \
	$(top_srcdir)/config/amanda/documentation.m4 \
	$(top_srcdir)/config/amanda/dumpers.m4 \
	$(top_srcdir)/config/amanda/flags.m4 \
	$(top_srcdir)/config/amanda/flock.m4 \
	$(top_srcdir)/config/amanda/funcs.m4 \
	$(top_srcdir)/config/amanda/getfsent.m4 \
	$(top_srcdir)/config/amanda/i18n.m4 \
	$(top_srcdir)/config/amanda/ipv6.m4 \
	$(top_srcdir)/config/amanda/krb4-security.m4 \
	$(top_srcdir)/config/amanda/krb5-security.m4 \
	$(top_srcdir)/config/amanda/lfs.m4 \
	$(top_srcdir)/config/amanda/libs.m4 \
	$(top_srcdir)/config/amanda/net.m4 \
	$(top_srcdir)/config/amanda/progs.m4 \
	$(top_srcdir)/config/amanda/ps.m4 \
	$(top_srcdir)/config/amanda/readdir.m4 \
	$(top_srcdir)/config/amanda/readline.m4 \
	$(top_srcdir)/config/amanda/rsh-security.m4 \
	$(top_srcdir)/config/amanda/s3-device.m4 \
	$(top_srcdir)/config/amanda/shmem.m4 \
	$(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
	$(top_srcdir)/config/amanda/ssh-security.m4 \
	$(top_srcdir)/config/amanda/summary.m4 \
	$(top_srcdir)/config/amanda/swig.m4 \
	$(top_srcdir)/config/amanda/syshacks.m4 \
	$(top_srcdir)/config/amanda/tape.m4 \
	$(top_srcdir)/config/amanda/types.m4 \
	$(top_srcdir)/config/amanda/userid.m4 \
	$(top_srcdir)/config/amanda/version.m4 \
	$(top_srcdir)/config/gnulib/alloca.m4 \
	$(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
	$(top_srcdir)/config/gnulib/base64.m4 \
	$(top_srcdir)/config/gnulib/eoverflow.m4 \
	$(top_srcdir)/config/gnulib/extensions.m4 \
	$(top_srcdir)/config/gnulib/float_h.m4 \
	$(top_srcdir)/config/gnulib/fsusage.m4 \
	$(top_srcdir)/config/gnulib/getaddrinfo.m4 \
	$(top_srcdir)/config/gnulib/getopt.m4 \
	$(top_srcdir)/config/gnulib/gettimeofday.m4 \
	$(top_srcdir)/config/gnulib/gnulib-common.m4 \
	$(top_srcdir)/config/gnulib/gnulib-comp.m4 \
	$(top_srcdir)/config/gnulib/include_next.m4 \
	$(top_srcdir)/config/gnulib/inet_ntop.m4 \
	$(top_srcdir)/config/gnulib/intmax_t.m4 \
	$(top_srcdir)/config/gnulib/lock.m4 \
	$(top_srcdir)/config/gnulib/longlong.m4 \
	$(top_srcdir)/config/gnulib/malloc.m4 \
	$(top_srcdir)/config/gnulib/mkdtemp.m4 \
	$(top_srcdir)/config/gnulib/netinet_in_h.m4 \
	$(top_srcdir)/config/gnulib/onceonly_2_57.m4 \
	$(top_srcdir)/config/gnulib/physmem.m4 \
	$(top_srcdir)/config/gnulib/safe-read.m4 \
	$(top_srcdir)/config/gnulib/safe-write.m4 \
	$(top_srcdir)/config/gnulib/snprintf.m4 \
	$(top_srcdir)/config/gnulib/socklen.m4 \
	$(top_srcdir)/config/gnulib/sockpfaf.m4 \
	$(top_srcdir)/config/gnulib/ssize_t.m4 \
	$(top_srcdir)/config/gnulib/stdbool.m4 \
	$(top_srcdir)/config/gnulib/stdint.m4 \
	$(top_srcdir)/config/gnulib/stdio_h.m4 \
	$(top_srcdir)/config/gnulib/stdlib_h.m4 \
	$(top_srcdir)/config/gnulib/strdup.m4 \
	$(top_srcdir)/config/gnulib/string_h.m4 \
	$(top_srcdir)/config/gnulib/sys_socket_h.m4 \
	$(top_srcdir)/config/gnulib/sys_stat_h.m4 \
	$(top_srcdir)/config/gnulib/sys_time_h.m4 \
	$(top_srcdir)/config/gnulib/tempname.m4 \
	$(top_srcdir)/config/gnulib/unistd_h.m4 \
	$(top_srcdir)/config/gnulib/vasnprintf.m4 \
	$(top_srcdir)/config/gnulib/visibility.m4 \
	$(top_srcdir)/config/gnulib/wchar.m4 \
	$(top_srcdir)/config/gettext-macros/gettext.m4 \
	$(top_srcdir)/config/gettext-macros/iconv.m4 \
	$(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
	$(top_srcdir)/config/gettext-macros/lib-ld.m4 \
	$(top_srcdir)/config/gettext-macros/lib-link.m4 \
	$(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
	$(top_srcdir)/config/gettext-macros/nls.m4 \
	$(top_srcdir)/config/gettext-macros/po.m4 \
	$(top_srcdir)/config/gettext-macros/progtest.m4 \
	$(top_srcdir)/config/gettext-macros/size_max.m4 \
	$(top_srcdir)/config/gettext-macros/stdint_h.m4 \
	$(top_srcdir)/config/gettext-macros/wchar_t.m4 \
	$(top_srcdir)/config/gettext-macros/wint_t.m4 \
	$(top_srcdir)/config/gettext-macros/xsize.m4 \
	$(top_srcdir)/config/libtool.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config/config.h
CONFIG_CLEAN_FILES = example/template.d/advanced.conf \
	example/template.d/amanda-S3.conf \
	example/template.d/amanda-harddisk.conf \
	example/template.d/amanda-single-tape.conf \
	example/template.d/amanda-tape-changer.conf
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pkgdatadir)"
pkgdataDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgdata_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = . gnulib config common-src amar-src amandad-src \
	client-src application-src device-src server-src changer-src \
	xfer-src restore-src recover-src oldrecover-src amplot perl po \
	man example packaging installcheck
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AIX_BACKUP = @AIX_BACKUP@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMANDA_DBGDIR = @AMANDA_DBGDIR@
AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
AMANDA_TMPDIR = @AMANDA_TMPDIR@
AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
AMLINT = @AMLINT@
AMLINTFLAGS = @AMLINTFLAGS@
AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
AMTAR = @AMTAR@
APPLICATION_DIR = @APPLICATION_DIR@
AR = @AR@
ARPA_INET_H = @ARPA_INET_H@
ASSERTIONS = @ASSERTIONS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASH = @BASH@
BINARY_OWNER = @BINARY_OWNER@
BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
BSDTCP_SECURITY = @BSDTCP_SECURITY@
BSDUDP_SECURITY = @BSDUDP_SECURITY@
BSD_SECURITY = @BSD_SECURITY@
CAT = @CAT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CHECK_USERID = @CHECK_USERID@
CHIO = @CHIO@
CHS = @CHS@
CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
CLIENT_LOGIN = @CLIENT_LOGIN@
CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
COMPRESS = @COMPRESS@
COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
COMPRESS_PATH = @COMPRESS_PATH@
COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
CONFIG_DIR = @CONFIG_DIR@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURL_CONFIG = @CURL_CONFIG@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DD = @DD@
DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
DEFAULT_CONFIG = @DEFAULT_CONFIG@
DEFAULT_MAILER = @DEFAULT_MAILER@
DEFAULT_SERVER = @DEFAULT_SERVER@
DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOC_BUILD_DATE = @DOC_BUILD_DATE@
DUMP = @DUMP@
DUMP_RETURNS_1 = @DUMP_RETURNS_1@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EOVERFLOW = @EOVERFLOW@
EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
FLOAT_H = @FLOAT_H@
GETCONF = @GETCONF@
GETOPT_H = @GETOPT_H@
GETTEXT = @GETTEXT@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
GNULIB_CHOWN = @GNULIB_CHOWN@
GNULIB_DUP2 = @GNULIB_DUP2@
GNULIB_ENVIRON = @GNULIB_ENVIRON@
GNULIB_FCHDIR = @GNULIB_FCHDIR@
GNULIB_FFLUSH = @GNULIB_FFLUSH@
GNULIB_FOPEN = @GNULIB_FOPEN@
GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
GNULIB_FREOPEN = @GNULIB_FREOPEN@
GNULIB_FSEEK = @GNULIB_FSEEK@
GNULIB_FSEEKO = @GNULIB_FSEEKO@
GNULIB_FTELL = @GNULIB_FTELL@
GNULIB_FTELLO = @GNULIB_FTELLO@
GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
GNULIB_GETCWD = @GNULIB_GETCWD@
GNULIB_GETDELIM = @GNULIB_GETDELIM@
GNULIB_GETLINE = @GNULIB_GETLINE@
GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
GNULIB_LCHOWN = @GNULIB_LCHOWN@
GNULIB_LSEEK = @GNULIB_LSEEK@
GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
GNULIB_MBSCHR = @GNULIB_MBSCHR@
GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
GNULIB_MBSLEN = @GNULIB_MBSLEN@
GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
GNULIB_MBSSEP = @GNULIB_MBSSEP@
GNULIB_MBSSPN = @GNULIB_MBSSPN@
GNULIB_MBSSTR = @GNULIB_MBSSTR@
GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
GNULIB_MEMMEM = @GNULIB_MEMMEM@
GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
GNULIB_PUTENV = @GNULIB_PUTENV@
GNULIB_READLINK = @GNULIB_READLINK@
GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
GNULIB_SETENV = @GNULIB_SETENV@
GNULIB_SLEEP = @GNULIB_SLEEP@
GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
GNULIB_STPCPY = @GNULIB_STPCPY@
GNULIB_STPNCPY = @GNULIB_STPNCPY@
GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
GNULIB_STRDUP = @GNULIB_STRDUP@
GNULIB_STRERROR = @GNULIB_STRERROR@
GNULIB_STRNDUP = @GNULIB_STRNDUP@
GNULIB_STRNLEN = @GNULIB_STRNLEN@
GNULIB_STRPBRK = @GNULIB_STRPBRK@
GNULIB_STRSEP = @GNULIB_STRSEP@
GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
GNULIB_STRSTR = @GNULIB_STRSTR@
GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
GNULIB_UNSETENV = @GNULIB_UNSETENV@
GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
GNUPLOT = @GNUPLOT@
GNUTAR = @GNUTAR@
GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
GOBJECT_QUERY = @GOBJECT_QUERY@
GREP = @GREP@
GZIP = @GZIP@
HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
HAVE_DUP2 = @HAVE_DUP2@
HAVE_FSEEKO = @HAVE_FSEEKO@
HAVE_FTELLO = @HAVE_FTELLO@
HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
HAVE_GZIP = @HAVE_GZIP@
HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
HAVE_IO_H = @HAVE_IO_H@
HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
HAVE_LSTAT = @HAVE_LSTAT@
HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
HAVE_MKDTEMP = @HAVE_MKDTEMP@
HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
HAVE_OS_H = @HAVE_OS_H@
HAVE_READLINK = @HAVE_READLINK@
HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
HAVE_SETENV = @HAVE_SETENV@
HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
HAVE_SLEEP = @HAVE_SLEEP@
HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRNDUP = @HAVE_STRNDUP@
HAVE_STRPBRK = @HAVE_STRPBRK@
HAVE_STRSEP = @HAVE_STRSEP@
HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
HAVE_UNISTD_H = @HAVE_UNISTD_H@
HAVE_UNSETENV = @HAVE_UNSETENV@
HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
HAVE_VASPRINTF = @HAVE_VASPRINTF@
HAVE_VISIBILITY = @HAVE_VISIBILITY@
HAVE_WCHAR_H = @HAVE_WCHAR_H@
HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
HAVE__BOOL = @HAVE__BOOL@
INCLUDE_NEXT = @INCLUDE_NEXT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
KRB4_SECURITY = @KRB4_SECURITY@
KRB5_SECURITY = @KRB5_SECURITY@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURL = @LIBCURL@
LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBMULTITHREAD = @LIBMULTITHREAD@
LIBOBJS = @LIBOBJS@
LIBPTH = @LIBPTH@
LIBS = @LIBS@
LIBTHREAD = @LIBTHREAD@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LN_S = @LN_S@
LOCKING = @LOCKING@
LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
LTLIBOBJS = @LTLIBOBJS@
LTLIBPTH = @LTLIBPTH@
LTLIBTHREAD = @LTLIBTHREAD@
MAILER = @MAILER@
MAKEINFO = @MAKEINFO@
MCUTIL = @MCUTIL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
MT = @MT@
MTX = @MTX@
MT_FILE_FLAG = @MT_FILE_FLAG@
NETINET_IN_H = @NETINET_IN_H@
NEXT_FLOAT_H = @NEXT_FLOAT_H@
NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
NEXT_STDINT_H = @NEXT_STDINT_H@
NEXT_STDIO_H = @NEXT_STDIO_H@
NEXT_STDLIB_H = @NEXT_STDLIB_H@
NEXT_STRING_H = @NEXT_STRING_H@
NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
NEXT_UNISTD_H = @NEXT_UNISTD_H@
NEXT_WCHAR_H = @NEXT_WCHAR_H@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PCAT = @PCAT@
PERL = @PERL@
PERLEXTLIBS = @PERLEXTLIBS@
PERL_INC = @PERL_INC@
PKG_CONFIG = @PKG_CONFIG@
POSUB = @POSUB@
PRINT = @PRINT@
PS = @PS@
PS_ARGUMENT = @PS_ARGUMENT@
PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
REPLACE_CHOWN = @REPLACE_CHOWN@
REPLACE_FCHDIR = @REPLACE_FCHDIR@
REPLACE_FFLUSH = @REPLACE_FFLUSH@
REPLACE_FOPEN = @REPLACE_FOPEN@
REPLACE_FPRINTF = @REPLACE_FPRINTF@
REPLACE_FREOPEN = @REPLACE_FREOPEN@
REPLACE_FSEEK = @REPLACE_FSEEK@
REPLACE_FSEEKO = @REPLACE_FSEEKO@
REPLACE_FTELL = @REPLACE_FTELL@
REPLACE_FTELLO = @REPLACE_FTELLO@
REPLACE_GETCWD = @REPLACE_GETCWD@
REPLACE_GETLINE = @REPLACE_GETLINE@
REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
REPLACE_LCHOWN = @REPLACE_LCHOWN@
REPLACE_LSEEK = @REPLACE_LSEEK@
REPLACE_MEMMEM = @REPLACE_MEMMEM@
REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
REPLACE_PRINTF = @REPLACE_PRINTF@
REPLACE_PUTENV = @REPLACE_PUTENV@
REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
REPLACE_SPRINTF = @REPLACE_SPRINTF@
REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
REPLACE_STRERROR = @REPLACE_STRERROR@
REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
REPLACE_STRSTR = @REPLACE_STRSTR@
REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
REPLACE_VPRINTF = @REPLACE_VPRINTF@
REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
RESTORE = @RESTORE@
RSH_SECURITY = @RSH_SECURITY@
SAMBA_CLIENT = @SAMBA_CLIENT@
SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
SERVICE_SUFFIX = @SERVICE_SUFFIX@
SETUID_GROUP = @SETUID_GROUP@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
SORT = @SORT@
SSH = @SSH@
SSH_SECURITY = @SSH_SECURITY@
STDBOOL_H = @STDBOOL_H@
STDINT_H = @STDINT_H@
STRIP = @STRIP@
SVN = @SVN@
SWIG = @SWIG@
SWIG_LIB = @SWIG_LIB@
SYS_SOCKET_H = @SYS_SOCKET_H@
SYS_STAT_H = @SYS_STAT_H@
SYS_TIME_H = @SYS_TIME_H@
TCPPORTRANGE = @TCPPORTRANGE@
TICKET_LIFETIME = @TICKET_LIFETIME@
UDPPORTRANGE = @UDPPORTRANGE@
UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
USE_NLS = @USE_NLS@
USE_RUNDUMP = @USE_RUNDUMP@
USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
VDUMP = @VDUMP@
VERSION = @VERSION@
VERSION_COMMENT = @VERSION_COMMENT@
VERSION_MAJOR = @VERSION_MAJOR@
VERSION_MINOR = @VERSION_MINOR@
VERSION_PATCH = @VERSION_PATCH@
VERSION_SUFFIX = @VERSION_SUFFIX@
VOID_UNSETENV = @VOID_UNSETENV@
VRESTORE = @VRESTORE@
VXDUMP = @VXDUMP@
VXRESTORE = @VXRESTORE@
WCHAR_H = @WCHAR_H@
WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
WINT_T_SUFFIX = @WINT_T_SUFFIX@
XFSDUMP = @XFSDUMP@
XFSRESTORE = @XFSRESTORE@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XSLREL = @XSLREL@
XSLTPROC = @XSLTPROC@
XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
YACC = @YACC@
YFLAGS = @YFLAGS@
_libcurl_config = @_libcurl_config@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
amdatadir = @amdatadir@
amincludedir = @amincludedir@
amlibdir = @amlibdir@
amlibexecdir = @amlibexecdir@
amperldir = @amperldir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
gltests_LIBOBJS = @gltests_LIBOBJS@
gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = 1.4 foreign
SUFFIXES = 
EXTRA_DIST = $(SNAPSHOT_STAMP) $(pkgdata_DATA) autogen contrib/README \
	contrib/dbbackup.README contrib/dbbackup.ksh \
	contrib/dbbackup.sql contrib/dbbackup.tcl contrib/mkamandisk \
	contrib/set_prod_link.pl contrib/gsc/README \
	contrib/gsc/cfggsc.c contrib/gsc/defgsc.c contrib/gsc/gsc.add \
	contrib/gsc/gscdd.c contrib/gsc/gscdds.h contrib/gsc/makefile \
	contrib/gsc/tstinq.c contrib/gsc/ucfggsc.c \
	patches/regex-3.6alpha.patch patches/samba-largefs.patch \
	patches/tar-1.12.patch UPGRADING DEVELOPING
BUILT_SOURCES = 
MOSTLYCLEANFILES = 
CLEANFILES = 
DISTCLEANFILES = $(am__append_1)
MAINTAINERCLEANFILES = 

# sed expression to strip leading directories from a filename; this converts e.g.,
# src/foo/bar.so to bar.so.
strip_leading_dirs = s|^.*/||
@WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
@WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"


# define a snippet of the scripts below to either perform a chown/chmod operation,
# or record that operation in the logfile.  On entry to the snippet, $$dest is the
# destination directory, $$cmd is the srcdir-relative pathname of the target file,
# $$chown is the ownership, and $$chmod is the permission pattern.
@WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
@WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
@WANT_INSTALLPERMS_TRUE@	echo chown "$$chown" "$$pa"; \
@WANT_INSTALLPERMS_TRUE@	chown "$$chown" "$$pa" || exit 1; \
@WANT_INSTALLPERMS_TRUE@    fi; \
@WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
@WANT_INSTALLPERMS_TRUE@	echo chmod "$$chmod" "$$pa"; \
@WANT_INSTALLPERMS_TRUE@	chmod "$$chmod" "$$pa" || exit 1; \
@WANT_INSTALLPERMS_TRUE@    fi 

@WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
ACLOCAL_AMFLAGS = --force -I . -I config -I config/gettext-macros -I config/gnulib -I config/amanda -I config/macro-archive
@WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src application-src
@WANT_SERVER_TRUE@SERVER_SUBDIRS = device-src server-src changer-src xfer-src
@WANT_RESTORE_TRUE@RESTORE_SUBDIRS = restore-src
@WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src oldrecover-src
@WANT_AMPLOT_TRUE@PLOT_SUBDIRS = amplot
# order is significant, don't change it arbitrarily
SUBDIRS = . \
	gnulib \
	config \
	common-src \
	amar-src \
	amandad-src \
	$(TAPE_SUBDIRS) \
	$(CLIENT_SUBDIRS) \
	$(SERVER_SUBDIRS) \
	$(RESTORE_SUBDIRS) \
	$(RECOVER_SUBDIRS) \
	$(PLOT_SUBDIRS) \
	perl \
	po \
	man \
	example \
	packaging \
	installcheck

pkgdata_DATA = \
	ReleaseNotes	\
	COPYRIGHT	\
	NEWS		\
	ChangeLog

CONFIG_STATUS = config.status

# ensure that configure gets the right arguments for distcheck; this keeps the
# user/group through to the distcheck, rather than defaulting back to 'amanda'.
DISTCHECK_CONFIGURE_FLAGS = --with-user=$(CLIENT_LOGIN) --with-group=$(SETUID_GROUP) --with-owner=$(BINARY_OWNER) --disable-installperms --without-amperldir --without-force-uid --with-tmpdir=$(AMANDA_TMPDIR) SINGLE_USERID=yes CLOBBER_MY_CONFIG=OK
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: 
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
example/template.d/advanced.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/advanced.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
example/template.d/amanda-S3.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-S3.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
example/template.d/amanda-harddisk.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-harddisk.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
example/template.d/amanda-single-tape.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-single-tape.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
example/template.d/amanda-tape-changer.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
install-pkgdataDATA: $(pkgdata_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
	@list='$(pkgdata_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
	  $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
	done

uninstall-pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgdata_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d $(distdir) || mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(pkgdatadir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-data-local install-pkgdataDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-dvi: install-dvi-recursive

install-exec-am: install-exec-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook

install-html: install-html-recursive

install-info: install-info-recursive

install-man:

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-pkgdataDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-data-am install-exec-am install-strip

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \
	distcheck distclean distclean-generic distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-hook \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-exec-hook install-exec-local \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-pkgdataDATA \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-pkgdataDATA


installperms-exec:
	@installperms="$(INSTALLPERMS_exec)"; \
	test -n "$$installperms" && echo "Setting installation permissions on executables"; \
	dest=; chown=; chmod=; \
	for cmd in $$installperms; do \
	    case "$$cmd" in \
		chown=amanda) \
			echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
		dest=*|chown=*|chmod=*) \
			echo "  ($$cmd)"; eval $$cmd;; \
	    	*) $(do_file) ;; \
	    esac; \
	done

installperms-data:
	@installperms="$(INSTALLPERMS_data)"; \
	dest=; chown=; chmod=; \
	for cmd in $$installperms; do \
	    case "$$cmd" in \
		chown=amanda) \
			echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
		dest=*|chown=*|chmod=*) \
			echo "  ($$cmd)"; eval $$cmd;; \
		*)  $(do_file) ;; \
	    esac; \
	done

install-exec-hook: installperms-exec
install-data-hook: installperms-data

# define a rule to initialize the installperms manifest file
@WANT_INSTALLPERMS_TRUE@installperms-init:
@WANT_INSTALLPERMS_FALSE@installperms-init:
@WANT_INSTALLPERMS_FALSE@	rm -f "$(installperms_sh)"

libtool: $(LIBTOOL_DEPS)
	$(SHELL) ./config.status --recheck

# empty out the installperms manifest file when we start
install-exec-local: installperms-init
install-data-local: installperms-init
$(CONFIG_STATUS): $(SNAPSHOT_STAMP)
SNAPSHOT:
	: SNAPSHOT file was removed, will reconfigure...

lint:
	(cd amandad-src; make lint)
	(cd changer-src; make lint)
	(cd client-src; make lint)
	(cd common-src; make lint)
	(cd oldrecover-src; make lint)
	(cd recover-src; make lint)
	(cd restore-src; make lint)
	(cd server-src; make lint)
	(cd xfer-src; make lint)

dist-hook:
	find $(distdir)/. -name '*.test.c' -exec rm {} \;
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: