2024-05-21 |
Keith Packard | Add test plan and test files |
commit | commitdiff | tree | snapshot |
2024-05-21 |
Bdale Garbee | remove 'p2' from version in silk |
commit | commitdiff | tree | snapshot |
2024-02-22 |
Bdale Garbee | ready to send out for more proto boards fab-v3-p2 |
commit | commitdiff | tree | snapshot |
2024-02-22 |
Bdale Garbee | fix SPI vs I2C conflict, adjust copper, get board DRC... |
commit | commitdiff | tree | snapshot |
2024-02-03 |
Bdale Garbee | move serial number silk rectangle and traces so laser... |
commit | commitdiff | tree | snapshot |
2024-01-31 |
Bdale Garbee | change I2C pullups to 2.49k, saves a resistor value |
commit | commitdiff | tree | snapshot |
2024-01-31 |
Bdale Garbee | forward annotate metadata to pcb |
commit | commitdiff | tree | snapshot |
2024-01-31 |
Bdale Garbee | increase battery voltage divider values by a decade too |
commit | commitdiff | tree | snapshot |
2024-01-31 |
Bdale Garbee | decade-higher values in comparator dividers, ala EasyMini |
commit | commitdiff | tree | snapshot |
2023-03-31 |
Bdale Garbee | clean up copper a bit for new resistor usb-pullup fab-v3-p1 |
commit | commitdiff | tree | snapshot |
2023-03-30 |
Keith Packard | Add USB pull-up on PA8 |
commit | commitdiff | tree | snapshot |
2023-03-30 |
Bdale Garbee | add 'p1' to the silk for proto run |
commit | commitdiff | tree | snapshot |
2023-03-29 |
Bdale Garbee | improve copper and silk |
commit | commitdiff | tree | snapshot |
2023-03-28 |
Bdale Garbee | more tweaking |
commit | commitdiff | tree | snapshot |
2023-03-28 |
Bdale Garbee | route complete, copper improved |
commit | commitdiff | tree | snapshot |
2023-03-28 |
Bdale Garbee | route complete |
commit | commitdiff | tree | snapshot |
2023-03-14 |
Bdale Garbee | work in progress, 9 rats remain |
commit | commitdiff | tree | snapshot |
2023-03-08 |
Bdale Garbee | schematic presumed complete, work in progress on layout |
commit | commitdiff | tree | snapshot |
2023-03-08 |
Bdale Garbee | move to TLV73333 LDO |
commit | commitdiff | tree | snapshot |
2023-03-08 |
Bdale Garbee | eliminate shorts due to template upgrade sequencing |
commit | commitdiff | tree | snapshot |
2023-03-08 |
Bdale Garbee | move pcb artwork to latest pcb-rnd template for layers... |
commit | commitdiff | tree | snapshot |
2023-03-08 |
Bdale Garbee | drop sensor interrupt lines, switch mag sensor to i2c |
commit | commitdiff | tree | snapshot |
2023-03-08 |
Bdale Garbee | declare new version, update copyright yet, etc etc |
commit | commitdiff | tree | snapshot |
2023-03-07 |
Bdale Garbee | switch to Taiwan Semi FETs |
commit | commitdiff | tree | snapshot |
2020-09-18 |
Bdale Garbee | rationalize screw strip part value in pref parts |
commit | commitdiff | tree | snapshot |
2020-05-18 |
Bdale Garbee | let attribs be automatically handled |
commit | commitdiff | tree | snapshot |
2019-07-29 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff | tree | snapshot |
2019-07-28 |
Keith Packard | Switch pyro series resistors to 1k |
commit | commitdiff | tree | snapshot |
2019-04-19 |
Bdale Garbee | saved geometry in project.lht |
commit | commitdiff | tree | snapshot |
2018-11-06 |
Bdale Garbee | increase size of polarity markings around LiPo connector fab-v2.0 |
commit | commitdiff | tree | snapshot |
2018-11-06 |
Bdale Garbee | update layout to include new 11071 USB connector footprint |
commit | commitdiff | tree | snapshot |
2018-10-06 |
Bdale Garbee | fix case of MHz suffix on crystal attribute |
commit | commitdiff | tree | snapshot |
2018-10-06 |
Bdale Garbee | eliminate attributes in schematic that pref parts will... |
commit | commitdiff | tree | snapshot |
2018-10-06 |
Bdale Garbee | use explicit suffix on STM part number for preferred_parts |
commit | commitdiff | tree | snapshot |
2018-09-14 |
Bdale Garbee | update to current attribs file, lose old project file |
commit | commitdiff | tree | snapshot |
2018-09-11 |
Bdale Garbee | snapshot work in progress |
commit | commitdiff | tree | snapshot |
2018-08-20 |
Bdale Garbee | forward-annotated new 4ucon micro USB connector to... |
commit | commitdiff | tree | snapshot |
2018-08-17 |
Bdale Garbee | change grid spacing to 1 mil |
commit | commitdiff | tree | snapshot |
2018-08-17 |
Bdale Garbee | move to new 4ucon micro USB connector with through... |
commit | commitdiff | tree | snapshot |
2018-08-17 |
Bdale Garbee | after first run of 'make pcb' to sync lihata pcb with... |
commit | commitdiff | tree | snapshot |
2018-08-17 |
Bdale Garbee | remove useless boot0 netname so GND netname remains... |
commit | commitdiff | tree | snapshot |
2018-08-17 |
Bdale Garbee | update design to use lepton-eda -> pcb-rnd |
commit | commitdiff | tree | snapshot |
2018-04-15 |
Bdale Garbee | add label for servo connector and update proto version... servos |
commit | commitdiff | tree | snapshot |
2018-04-02 |
Bdale Garbee | lose the 10k pull-down on boot0 fab-v2-proto1 |
commit | commitdiff | tree | snapshot |
2018-04-02 |
Bdale Garbee | route complete, drc clean |
commit | commitdiff | tree | snapshot |
2018-04-02 |
Bdale Garbee | move to smaller 16 Mhz crystal used in TeleMini to... |
commit | commitdiff | tree | snapshot |
2018-04-01 |
Bdale Garbee | re-assign spi ports |
commit | commitdiff | tree | snapshot |
2018-04-01 |
Bdale Garbee | update schematic to reflect current TeleMega design... |
commit | commitdiff | tree | snapshot |
2016-02-17 |
Bdale Garbee | version 2, with servo outputs, route complete and DRC... |
commit | commitdiff | tree | snapshot |
2016-02-17 |
Bdale Garbee | add servo output connector to schematic, forces move... |
commit | commitdiff | tree | snapshot |
2014-07-25 |
Bdale Garbee | refdes in the silk doesn't help us any fab-v1.0 |
commit | commitdiff | tree | snapshot |
2014-07-25 |
Bdale Garbee | 4ucon connectors |
commit | commitdiff | tree | snapshot |
2014-07-25 |
Bdale Garbee | give the STM a part number |
commit | commitdiff | tree | snapshot |
2014-07-24 |
Bdale Garbee | DK is out of one variant of the LiPo charger, the other... |
commit | commitdiff | tree | snapshot |
2014-07-24 |
Bdale Garbee | update schematic to resolve no-connects in drc |
commit | commitdiff | tree | snapshot |
2014-07-24 |
Bdale Garbee | fix dangling bypass cap, route complete, drc clean... |
commit | commitdiff | tree | snapshot |
2014-05-14 |
Bdale Garbee | attribute tweaks |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | resolve freedfm.com apparent round-off error issues fab-0.1 |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | fix clearance problem in MM footprints |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | fix product name in pcb file header |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | add logo, clean up silk |
commit | commitdiff | tree | snapshot |
2014-03-18 |
Bdale Garbee | lots of copper tweaking |
commit | commitdiff | tree | snapshot |
2014-03-16 |
Bdale Garbee | route complete, drc clean |
commit | commitdiff | tree | snapshot |
2014-03-16 |
Bdale Garbee | lose the spi snubbers |
commit | commitdiff | tree | snapshot |
2014-03-15 |
Bdale Garbee | drop bootload connector since companion can be spi... |
commit | commitdiff | tree | snapshot |
2014-03-15 |
Bdale Garbee | add companion and serial/bootload connectors back into... |
commit | commitdiff | tree | snapshot |
2014-02-20 |
Bdale Garbee | significant work on board outline, placement, etc |
commit | commitdiff | tree | snapshot |
2014-02-20 |
Bdale Garbee | lose the SPI filters |
commit | commitdiff | tree | snapshot |
2014-02-20 |
Bdale Garbee | don't need reset controller since STM32L has an interna... |
commit | commitdiff | tree | snapshot |
2013-12-05 |
Bdale Garbee | initial checking of stripped-down TeleMega design |
commit | commitdiff | tree | snapshot |
|