2022-10-28 |
Bdale Garbee | drop two dangling copper fragments found by AC quality...
|
commit | commitdiff | tree |
2022-09-16 |
Bdale Garbee | address drc concerns
|
commit | commitdiff | tree |
2022-09-16 |
Bdale Garbee | fix DRC errors .. a no-longer used pin and a couple...
|
commit | commitdiff | tree |
2022-08-29 |
Bdale Garbee | a few more tweaks?
|
commit | commitdiff | tree |
2022-08-24 |
Bdale Garbee | switch to LM193QT comparators since we can get them...
|
commit | commitdiff | tree |
2022-07-27 |
Bdale Garbee | route complete, no drc/dfm work yet
|
commit | commitdiff | tree |
2022-07-26 |
Bdale Garbee | working on layout update
|
commit | commitdiff | tree |
2022-07-26 |
Bdale Garbee | update schematics for TeleMega v6.0
|
commit | commitdiff | tree |
2021-10-28 |
Bdale Garbee | declare version 6.0 in schematic, move back to TDK...
|
commit | commitdiff | tree |
2021-09-01 |
Bdale Garbee | clean up schematics before releasing pdf
|
commit | commitdiff | tree |
2021-07-20 |
Bdale Garbee | mark new beeper as noload, since we'll do it here
|
commit | commitdiff | tree |
2021-07-15 |
Bdale Garbee | move beeper to tim 3 ch 2 so code is easier
|
commit | commitdiff | tree |
2021-07-15 |
Bdale Garbee | replace missing vcc via in radio section. route complete...
|
commit | commitdiff | tree |
2021-07-14 |
Bdale Garbee | route complete, drc clean, copper stared at .. ready...
|
commit | commitdiff | tree |
2021-07-13 |
Bdale Garbee | still working on it .. a few pin swaps, moved v_batt...
|
commit | commitdiff | tree |
2021-07-13 |
Bdale Garbee | reduce via size to 10 mils everywhere
|
commit | commitdiff | tree |
2021-07-13 |
Bdale Garbee | change all 10 mil traces to 8 mil
|
commit | commitdiff | tree |
2021-07-13 |
Bdale Garbee | snapshot work in progress
|
commit | commitdiff | tree |
2021-07-12 |
Bdale Garbee | note pin limits based on SOC mix we plan to use for v5
|
commit | commitdiff | tree |
2021-07-08 |
Bdale Garbee | rip up a lot of the copper under the SOC, could use...
|
commit | commitdiff | tree |
2021-07-08 |
Bdale Garbee | move GPS from serial 3 to serial 2 to ease routing
|
commit | commitdiff | tree |
2021-06-12 |
Bdale Garbee | initial cleanup of board for v5
|
commit | commitdiff | tree |
2021-06-12 |
Bdale Garbee | working schematic for TeleMega v5.0
|
commit | commitdiff | tree |
2021-06-12 |
Bdale Garbee | assert specific STM32L151 variant in use
|
commit | commitdiff | tree |
2021-06-12 |
Bdale Garbee | first cut at schematic for TeleMega v5.0
|
commit | commitdiff | tree |
2020-11-11 |
Bdale Garbee | remove spurious, unconnected 0402 footprint
|
commit | commitdiff | tree |
2020-09-18 |
Bdale Garbee | rationalize screw strip part value in pref parts
|
commit | commitdiff | tree |
2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
2020-02-20 |
Bdale Garbee | metadata updates
|
commit | commitdiff | tree |
2020-01-08 |
Bdale Garbee | add copper to power-plane around USB connector slots...
|
commit | commitdiff | tree |
2020-01-08 |
Bdale Garbee | switch to cc1200 symbol on schematic to avoid confusion
|
commit | commitdiff | tree |
2020-01-08 |
Bdale Garbee | update comment on GPS backup current limiting resistor
|
commit | commitdiff | tree |
2020-01-06 |
Bdale Garbee | give adxl375 a set of spi1 pins to itself
|
commit | commitdiff | tree |
2020-01-06 |
Bdale Garbee | update copyrights to 2020
|
commit | commitdiff | tree |
2019-12-12 |
Bdale Garbee | add outline features defining USB connector mounting...
|
commit | commitdiff | tree |
2019-11-29 |
Bdale Garbee | lose BOOT* pull-down resistors, switch to MAX-8Q GPS
|
commit | commitdiff | tree |
2019-11-14 |
Bdale Garbee | initial layout with BMX160 completed
|
commit | commitdiff | tree |
2019-09-25 |
Bdale Garbee | move to BMX160 IMU due to EOL on the 9250
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | rotate ADXL375 to match EasyMega orientation
|
commit | commitdiff | tree |
2019-07-11 |
Bdale Garbee | re-brand as version 4.0, update copyright year
|
commit | commitdiff | tree |
2019-01-15 |
Bdale Garbee | update layout to use new usb connector
|
commit | commitdiff | tree |
2019-01-15 |
Bdale Garbee | move to 11071 USB connector
|
commit | commitdiff | tree |
2019-01-15 |
Bdale Garbee | transition to lepton-eda and pcb-rnd
|
commit | commitdiff | tree |
2019-01-15 |
Bdale Garbee | include mfg in attribs
|
commit | commitdiff | tree |
2019-01-15 |
Bdale Garbee | Merge remote-tracking branch 'origin/separate-accel...
|
commit | commitdiff | tree |
2018-04-19 |
Bdale Garbee | Merge commit 'ea4cbfb'
|
commit | commitdiff | tree |
2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA
|
commit | commitdiff | tree |
2018-02-26 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
2018-02-25 |
Bdale Garbee | swap accel interrupt lines at ARM SOC to ease routing
|
commit | commitdiff | tree |
2018-02-25 |
Bdale Garbee | we actually need to provide power to both accel power...
|
commit | commitdiff | tree |
2018-02-25 |
Bdale Garbee | update schematic to use ADXL375 as high-g accel
|
commit | commitdiff | tree |
2017-11-10 |
Bdale Garbee | move to Keith's ufqfpn24 footprint for MPU9250
|
commit | commitdiff | tree |
2017-11-10 |
Bdale Garbee | replace 9250 footprint with corrected version
|
commit | commitdiff | tree |
2017-10-12 |
Bdale Garbee | lose the gps_pps net, ground IMU's FSYNC pin instead
|
commit | commitdiff | tree |
2017-10-12 |
Bdale Garbee | new version of pcb updated the file
|
commit | commitdiff | tree |
2016-11-04 |
Bdale Garbee | updated artwork for prototype of v3.0
|
commit | commitdiff | tree |
2016-11-04 |
Bdale Garbee | replace MPU-6000 and HMC5883L with MPU-9250 for v3.0
|
commit | commitdiff | tree |
2016-10-18 |
Bdale Garbee | lose 'provided' attributes, let pref parts database...
|
commit | commitdiff | tree |
2016-01-11 |
Bdale Garbee | meta-data updates for v2.0 build
|
commit | commitdiff | tree |
2015-11-26 |
Bdale Garbee | reduce pcb workspace size to board outline again, make...
|
commit | commitdiff | tree |
2015-11-15 |
Bdale Garbee | hide refdes associated with (new) servos connector
|
commit | commitdiff | tree |
2015-11-15 |
Bdale Garbee | mark loadstatus invisible on all parts
|
commit | commitdiff | tree |
2015-11-14 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git...
|
commit | commitdiff | tree |
2015-10-29 |
Bdale Garbee | elide remaining refdes from silk
|
commit | commitdiff | tree |
2015-10-25 |
Bdale Garbee | move to CC1200 and 40mhz rock, fix some attributes
|
commit | commitdiff | tree |
2015-10-25 |
Bdale Garbee | move to use of preferred parts database
|
commit | commitdiff | tree |
2015-09-20 |
Bdale Garbee | add explicit NC symbols to unconnected pins on schematic...
|
commit | commitdiff | tree |
2015-09-20 |
Bdale Garbee | re-map cs_companionN pins to match EasyMega, allows...
|
commit | commitdiff | tree |
2015-09-20 |
Bdale Garbee | elide dangling uart1 pin connections on soc
|
commit | commitdiff | tree |
2015-08-18 |
Bdale Garbee | forward annotate value changes to PCB
|
commit | commitdiff | tree |
2015-08-18 |
Bdale Garbee | conventional wisdom appears to be 220 ohms on the PWM...
|
commit | commitdiff | tree |
2015-08-17 |
Bdale Garbee | use locking connector for servo PWM outputs
|
commit | commitdiff | tree |
2015-08-17 |
Bdale Garbee | lose the spi2 snubbers we've never used, replace serial...
|
commit | commitdiff | tree |
2014-10-27 |
Bdale Garbee | fix DRC violation following LED symbol replacement
|
commit | commitdiff | tree |
2014-10-26 |
Bdale Garbee | update layout to use dual LED footprint with cathode...
|
commit | commitdiff | tree |
2014-10-26 |
Bdale Garbee | fix 4ucon part number
|
commit | commitdiff | tree |
2014-01-16 |
Bdale Garbee | add support for generating pdf files
|
commit | commitdiff | tree |
2014-01-16 |
Bdale Garbee | move to 4ucon connectors
|
commit | commitdiff | tree |
2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint
|
commit | commitdiff | tree |
2013-11-08 |
Bdale Garbee | answer to question from AC
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | updated Makefile to include dk and mouser targets, etc
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | update attributes to reflect available part stock at DK
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | noload the screw terminal strips (coming from 4ucon...
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | hide all refdes to keep the silk from being a mess
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | move LED resistor farther from SW corner mounting screw...
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | fix LM293 part number at DK to one we can actually buy
|
commit | commitdiff | tree |
2013-10-24 |
Bdale Garbee | elide snubbers on SPI 1, minor via shoving to improve...
|
commit | commitdiff | tree |
2013-10-11 |
Bdale Garbee | more clearance between v_ldo_in and the screw in the...
|
commit | commitdiff | tree |
2013-10-11 |
Bdale Garbee | new cap size for LDO input
|
commit | commitdiff | tree |
2013-10-11 |
Bdale Garbee | change to smaller physical part for the LDO input cap
|
commit | commitdiff | tree |
2013-10-06 |
Bdale Garbee | Merge branch 'passive'
|
commit | commitdiff | tree |
2013-10-06 |
Bdale Garbee | Merge branch 'passive'
|
commit | commitdiff | tree |
2013-09-14 |
Bdale Garbee | get the pyro circuit resistor values right
|
commit | commitdiff | tree |
2013-08-09 |
Bdale Garbee | copper tweaking
|
commit | commitdiff | tree |
2013-08-09 |
Bdale Garbee | clean up some copper issues
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | CPU is much cheaper at Avnet than at DK
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | CPU is much cheaper at Avnet than at DK
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | route complete, passes DRC
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | change version to 0.4 P for passive GPS antenna option
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | change version to 0.4 A for active GPS antenna option
|
commit | commitdiff | tree |
next |