2024-08-27 |
Bdale Garbee | document what needs to be done to prep a v3.0 board...
|
commit | commitdiff | tree |
2024-08-27 |
Bdale Garbee | fix ALS orientation, declare version 3.1
|
commit | commitdiff | tree |
2024-07-06 |
Bdale Garbee | add pnp layers and config for providing refdes layers...
|
commit | commitdiff | tree |
2024-07-06 |
Bdale Garbee | add pnp layers to be able to export refdes layers for...
|
commit | commitdiff | tree |
2024-07-02 |
Bdale Garbee | add metadata, update pcb artwork to include light sensor
|
commit | commitdiff | tree |
2024-06-11 |
Bdale Garbee | update version number for release, use AT1220-only...
|
commit | commitdiff | tree |
2024-03-05 |
Bdale Garbee | prepare to send to jlcpcb
|
commit | commitdiff | tree |
2024-03-05 |
Bdale Garbee | a couple tweaks to improve silk screen, etc
|
commit | commitdiff | tree |
2024-02-23 |
Bdale Garbee | working on assembly BOM in Inventree
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | a bit of copper tweaking
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | lose 'noload' on offboard parts, since it's meaningless
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | clean up attributes, including losing the useless symversions
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | eliminate RF tuning capacitor we never load
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | replace screw strips with 3 4-screw strips, eliminate...
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | renumber debug connector in anticipating of changing...
|
commit | commitdiff | tree |
2024-02-21 |
Bdale Garbee | notes about cabling choices
|
commit | commitdiff | tree |
2024-02-17 |
Bdale Garbee | move things around so Drag Race LED can be on the circuit...
|
commit | commitdiff | tree |
2024-01-11 |
Bdale Garbee | swap bl_lcd and mosi1 lines, mosi was hooked to miso!
|
commit | commitdiff | tree |
2024-01-07 |
Bdale Garbee | update version and copyright year assertions
|
commit | commitdiff | tree |
2024-01-07 |
Bdale Garbee | add a 1.5k pull-up on usbdp to pa10, moving LED from...
|
commit | commitdiff | tree |
2023-12-12 |
Bdale Garbee | save work in progress
|
commit | commitdiff | tree |
2023-04-27 |
Bdale Garbee | Merge branch 'graphical-lcd'
|
commit | commitdiff | tree |
2023-04-27 |
Bdale Garbee | a little more trace cleanup around SOC corner pins...
|
commit | commitdiff | tree |
2023-04-26 |
Bdale Garbee | re-worked to declare version 3.0p1 using 128x64 bit...
|
commit | commitdiff | tree |
2023-04-21 |
Bdale Garbee | notes about LCD availability
|
commit | commitdiff | tree |
2020-09-18 |
Bdale Garbee | rationalize screw strip values to simplify pref parts...
|
commit | commitdiff | tree |
2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
2019-12-10 |
Bdale Garbee | quick notes about what parts Bdale through-hole loads...
|
commit | commitdiff | tree |
2019-08-05 |
Bdale Garbee | eliminate spurious feature in outline layer
|
commit | commitdiff | tree |
2019-08-05 |
Bdale Garbee | capture updates to pcb file from new software version...
|
commit | commitdiff | tree |
2019-08-05 |
Bdale Garbee | elimiate LAYERS and SILK from Makefile, they aren't...
|
commit | commitdiff | tree |
2019-06-25 |
Bdale Garbee | more metadata updates
|
commit | commitdiff | tree |
2019-03-25 |
Bdale Garbee | increase size of various silk elements to make assembly...
|
commit | commitdiff | tree |
2019-03-25 |
Bdale Garbee | update Notebook text regarding 12V up-converter
|
commit | commitdiff | tree |
2019-03-25 |
Bdale Garbee | Revert "shuffle screw terminal order to ease wiring...
|
commit | commitdiff | tree |
2019-03-23 |
Bdale Garbee | shuffle screw terminal order to ease wiring of arm...
|
commit | commitdiff | tree |
2019-03-18 |
Bdale Garbee | update offboard schematic to show safe/arm and fire...
|
commit | commitdiff | tree |
2019-03-18 |
Bdale Garbee | added series resistors for switch gpios to layout
|
commit | commitdiff | tree |
2019-03-18 |
Bdale Garbee | add series R on switch to gpio nets
|
commit | commitdiff | tree |
2019-03-06 |
Bdale Garbee | update copyright assertions to 2019
|
commit | commitdiff | tree |
2018-09-09 |
Bdale Garbee | add a companion connector for possible use with matrix...
|
commit | commitdiff | tree |
2018-09-09 |
Bdale Garbee | move to lepton-eda and pcb-rnd
|
commit | commitdiff | tree |
2018-07-01 |
Bdale Garbee | route complete and drc clean with updated RF section
|
commit | commitdiff | tree |
2018-06-29 |
Bdale Garbee | change cap values to 10nF for compatibility with preferred...
|
commit | commitdiff | tree |
2018-06-29 |
Bdale Garbee | copy in the TeleMega RF section
|
commit | commitdiff | tree |
2018-06-29 |
Bdale Garbee | clip out existing RF section entirely
|
commit | commitdiff | tree |
2018-06-29 |
Bdale Garbee | working on radio section layout
|
commit | commitdiff | tree |
2018-06-22 |
Bdale Garbee | move RF section south for improved panel cabling, relocate...
|
commit | commitdiff | tree |
2018-05-30 |
Bdale Garbee | document what's required to make the 12V switcher on...
|
commit | commitdiff | tree |
2018-05-29 |
Bdale Garbee | capture schematic changes as-built for sn 5138
|
commit | commitdiff | tree |
2018-05-28 |
Bdale Garbee | make net names easier for keithp to decode
|
commit | commitdiff | tree |
2018-05-26 |
Bdale Garbee | change CC1200 pads to have square corners for better...
|
commit | commitdiff | tree |
2018-05-26 |
Bdale Garbee | updated attributes for off-board telelco parts
|
commit | commitdiff | tree |
2018-05-16 |
Bdale Garbee | update information on required off-board parts
|
commit | commitdiff | tree |
2018-05-15 |
Bdale Garbee | correct knob for encoder shaft
|
commit | commitdiff | tree |
2018-05-08 |
Bdale Garbee | more silk, more copper shoving
|
commit | commitdiff | tree |
2018-05-08 |
Bdale Garbee | lose vestiges of pre-pref-parts era
|
commit | commitdiff | tree |
2018-05-08 |
Bdale Garbee | propagate LED and resistor attributes to pcb file
|
commit | commitdiff | tree |
2018-05-08 |
Bdale Garbee | shove copper around to avoid departing qfp corner pins...
|
commit | commitdiff | tree |
2018-05-08 |
Bdale Garbee | clean up schematic to avoid overlap with longer LED...
|
commit | commitdiff | tree |
2018-05-08 |
Bdale Garbee | use 3mm diameter LEDs for battery charger red+green
|
commit | commitdiff | tree |
2018-05-07 |
Bdale Garbee | to meet SOC current limits, set limiting resistors...
|
commit | commitdiff | tree |
2018-05-05 |
Bdale Garbee | use micro USB symbol in schematic since that's what...
|
commit | commitdiff | tree |
2018-05-05 |
Bdale Garbee | rename +12V net to fire12V
|
commit | commitdiff | tree |
2018-05-05 |
Bdale Garbee | swap arm and armed at SOC to eliminate interrupt conflict...
|
commit | commitdiff | tree |
2018-05-05 |
Bdale Garbee | eliminate radio_marc_int net per keithp
|
commit | commitdiff | tree |
2018-05-04 |
Bdale Garbee | label mode and select switch screws
|
commit | commitdiff | tree |
2018-05-04 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
2018-04-10 |
Bdale Garbee | add explicit mode switch, LED, and push button for...
|
commit | commitdiff | tree |
2018-04-05 |
Bdale Garbee | add boost converter to power 12V LED integral to Fire...
|
commit | commitdiff | tree |
2018-04-05 |
Bdale Garbee | update part number for encoder
|
commit | commitdiff | tree |
2018-04-04 |
Bdale Garbee | move to micromatch version with locking ears for encoder...
|
commit | commitdiff | tree |
2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA
|
commit | commitdiff | tree |
2018-03-30 |
Bdale Garbee | clean up offboard parts schematic a bit
|
commit | commitdiff | tree |
2018-03-30 |
Bdale Garbee | push RF link quality LEDs closer together
|
commit | commitdiff | tree |
2018-03-30 |
Bdale Garbee | added more continuity LEDs, reworked placement, much...
|
commit | commitdiff | tree |
2018-03-30 |
Bdale Garbee | add 4 more continuity LEDs, move from spades to screws...
|
commit | commitdiff | tree |
2018-03-30 |
Bdale Garbee | move to STM32L152VCT6 for more memory
|
commit | commitdiff | tree |
2018-03-30 |
Bdale Garbee | route complete, drc clean, needs work on silk and mech...
|
commit | commitdiff | tree |
2018-03-29 |
Bdale Garbee | more work on placement, a few traces added
|
commit | commitdiff | tree |
2018-03-21 |
Bdale Garbee | working on revised pcb layout
|
commit | commitdiff | tree |
2018-03-20 |
Bdale Garbee | move off-board parts to a separate schematic sheet...
|
commit | commitdiff | tree |
|