2023-02-22 |
Bdale Garbee | fix short between fire_a and fire_b that sadly made...
|
commit | commitdiff | tree |
2023-02-18 |
Bdale Garbee | elide dangling trace found by AC
|
commit | commitdiff | tree |
2022-12-08 |
Bdale Garbee | improve copper to try and avoid 0.003 min spacing cost...
|
commit | commitdiff | tree |
2022-12-01 |
Bdale Garbee | mark beeper as a noload, too
|
commit | commitdiff | tree |
2022-12-01 |
Bdale Garbee | specify use of MAX-8C for TM v4.0 build
|
commit | commitdiff | tree |
2022-11-21 |
Bdale Garbee | lose redundant vias by GPS module
|
commit | commitdiff | tree |
2022-11-06 |
Bdale Garbee | more copper cleanups
|
commit | commitdiff | tree |
2022-11-06 |
Bdale Garbee | reduce size of solder mask openings on USB connector...
|
commit | commitdiff | tree |
2022-11-06 |
Bdale Garbee | fix vddcore (pin 43) wiring, adding 1uF from that pin...
|
commit | commitdiff | tree |
2022-09-16 |
Bdale Garbee | route complete, drc more or less clean
|
commit | commitdiff | tree |
2022-08-23 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
2022-08-18 |
Bdale Garbee | move back to TDK piezo beeper
|
commit | commitdiff | tree |
2022-08-18 |
Bdale Garbee | switch to available comparator package
|
commit | commitdiff | tree |
2022-01-25 |
Bdale Garbee | shrink soldermask opening around GPS patch pad to avoid...
|
commit | commitdiff | tree |
2022-01-25 |
Bdale Garbee | turn on solder paste for USB connector tabs
|
commit | commitdiff | tree |
2022-01-25 |
Bdale Garbee | fix mounting hole thermal
|
commit | commitdiff | tree |
2022-01-24 |
Bdale Garbee | improve copper
|
commit | commitdiff | tree |
2022-01-24 |
Bdale Garbee | route complete, drc clean
|
commit | commitdiff | tree |
2022-01-24 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
2022-01-24 |
Bdale Garbee | move to 7/5 signal traces, 10/25/5 signal vias
|
commit | commitdiff | tree |
2022-01-24 |
Bdale Garbee | copper poly around USB connector for maximum adhesion...
|
commit | commitdiff | tree |
2022-01-24 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
2022-01-23 |
Bdale Garbee | resolve all schematic DRC errors (mostly NC pins),...
|
commit | commitdiff | tree |
2022-01-23 |
Bdale Garbee | also connect accel int lines
|
commit | commitdiff | tree |
2022-01-23 |
Bdale Garbee | schematic at "first cut" level for sam21d
|
commit | commitdiff | tree |
2022-01-22 |
Bdale Garbee | work in progress .. lots and lots of copper cleanups...
|
commit | commitdiff | tree |
2022-01-22 |
Bdale Garbee | move board design to updated 4-layer template, move...
|
commit | commitdiff | tree |
2020-09-18 |
Bdale Garbee | rationalize screw strip value against preferred-parts
|
commit | commitdiff | tree |
2020-09-18 |
Bdale Garbee | move LDO bulk cap to same 1206 footprint part used...
|
commit | commitdiff | tree |
2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
2019-10-03 |
Bdale Garbee | move to MAX-8Q GPS module, fix ADXL375 metadata
|
commit | commitdiff | tree |
2019-10-03 |
Bdale Garbee | drop 'boot0' netname now that resistor is gone, so...
|
commit | commitdiff | tree |
2019-09-25 |
Bdale Garbee | pcb passes DRC now
|
commit | commitdiff | tree |
2019-09-17 |
Bdale Garbee | update copyright year and board version in silk
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | route complete, needs DRC and DFM work yet
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | updated parts placement on pcb .. not routed yet
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | move to 4ucon 11071 micro USB connector
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | move to ADXL375
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | working on TeleMetrum v3.0 .. first step, move to cc1200
|
commit | commitdiff | tree |
2019-08-16 |
Bdale Garbee | move workflow from gEDA to lepton-eda -> pcb-rnd
|
commit | commitdiff | tree |
2019-05-08 |
Bdale Garbee | should at least move the schematic version assertion...
|
commit | commitdiff | tree |
2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA
|
commit | commitdiff | tree |
2018-03-15 |
Bdale Garbee | deliver both silkscreens
|
commit | commitdiff | tree |
2017-08-07 |
Bdale Garbee | be consistent about thermaling mounting holes on UHF...
|
commit | commitdiff | tree |
2015-10-26 |
Bdale Garbee | move to preferred parts database
|
commit | commitdiff | tree |
2015-10-26 |
Bdale Garbee | more attribute updates for preferred parts
|
commit | commitdiff | tree |
2015-10-26 |
Bdale Garbee | regularize metadata on saw filter for preferred parts...
|
commit | commitdiff | tree |
2015-10-26 |
Bdale Garbee | move to new attribs file for preferred parts database
|
commit | commitdiff | tree |
2014-10-26 |
Bdale Garbee | update copyright year in the silk
|
commit | commitdiff | tree |
2014-09-15 |
Bdale Garbee | move GPS chip and SAW filter 30 mils farther from GPS...
|
commit | commitdiff | tree |
2014-02-15 |
Bdale Garbee | add code to emit pdf schematics and artwork
|
commit | commitdiff | tree |
2014-01-16 |
Bdale Garbee | update BOM to reflect actual accel part we're using
|
commit | commitdiff | tree |
2013-12-27 |
Bdale Garbee | pull inner layers back 15 mils from board edge per AC
|
commit | commitdiff | tree |
2013-12-27 |
Bdale Garbee | update capacitor part numbers to match currently available...
|
commit | commitdiff | tree |
2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint
|
commit | commitdiff | tree |
2013-12-19 |
Bdale Garbee | mark all through-hole parts as no-load for AC build...
|
commit | commitdiff | tree |
2013-12-11 |
Bdale Garbee | forward annotate component attributes to pcb file
|
commit | commitdiff | tree |
2013-12-11 |
Bdale Garbee | update PCB silk to say version 2.0
|
commit | commitdiff | tree |
2013-12-11 |
Bdale Garbee | update u-blox part number
|
commit | commitdiff | tree |
2013-12-09 |
Bdale Garbee | use 4ucon screw terminal strip, cheaper patch that...
|
commit | commitdiff | tree |
2013-08-20 |
Bdale Garbee | hook beeper to a timer output at Keith's request
|
commit | commitdiff | tree |
2013-08-09 |
Bdale Garbee | clean up silk, etc
|
commit | commitdiff | tree |
2013-08-09 |
Bdale Garbee | fix stm footprint via clearance issue, etc
|
commit | commitdiff | tree |
2013-08-09 |
Bdale Garbee | significant placement and copper rework in the UHF...
|
commit | commitdiff | tree |
2013-08-08 |
Bdale Garbee | more copper shoving
|
commit | commitdiff | tree |
2013-08-08 |
Bdale Garbee | a number of copper tweaks .. more to do tomorrow
|
commit | commitdiff | tree |
2013-08-05 |
Bdale Garbee | thermal the other two mounting holes
|
commit | commitdiff | tree |
2013-08-05 |
Bdale Garbee | update pcb to reflect removal of C600
|
commit | commitdiff | tree |
2013-08-05 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git...
|
commit | commitdiff | tree |
2013-08-05 |
Bdale Garbee | omit spurious bypass cap
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | the CPU is a lot cheaper at Avnet than at DK
|
commit | commitdiff | tree |
2013-08-04 |
Bdale Garbee | switch to taoglas 18.4 patch
|
commit | commitdiff | tree |
2013-08-01 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
2013-05-30 |
Bdale Garbee | passive patch only, simplify GPS reset as per latest...
|
commit | commitdiff | tree |
2013-05-30 |
Bdale Garbee | change radio to cc1120
|
commit | commitdiff | tree |
2013-05-05 |
Bdale Garbee | data sheets that matter should be in the shared repo
|
commit | commitdiff | tree |
2013-05-05 |
Bdale Garbee | work done on CLE->DEN flight
|
commit | commitdiff | tree |
2013-05-05 |
Bdale Garbee | lock holes and usb connector placement
|
commit | commitdiff | tree |
2013-05-05 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
2013-05-02 |
Bdale Garbee | snapshot work done on DEN->CLE flight
|
commit | commitdiff | tree |
2013-05-02 |
Bdale Garbee | move to the smaller 48 lead STM package ala TeleGPS
|
commit | commitdiff | tree |
2013-05-02 |
Bdale Garbee | first stab at next-gen TeleMetrum based on a subset...
|
commit | commitdiff | tree |
2013-05-02 |
Bdale Garbee | move to common shared symbols library
|
commit | commitdiff | tree |
2013-05-02 |
Bdale Garbee | move Makefile and project config to best practices
|
commit | commitdiff | tree |
2013-02-15 |
Bdale Garbee | move to shared scheme dir, etc
|
commit | commitdiff | tree |
2012-12-11 |
Bdale Garbee | move to local copy of partslistgag script
|
commit | commitdiff | tree |
2012-12-08 |
Bdale Garbee | change GPS DC bias inductor to 47nH to lower SRF so...
|
commit | commitdiff | tree |
2012-12-08 |
Bdale Garbee | move flash data sheet to the right place
|
commit | commitdiff | tree |
2012-09-28 |
Bdale Garbee | part obsoleted, this is an acceptable replacement
|
commit | commitdiff | tree |
2012-09-28 |
Bdale Garbee | these parts are in stock and cheaper at Mouser right now
|
commit | commitdiff | tree |
2012-09-28 |
Bdale Garbee | move the tc2185 data sheet to the microchip sub-directory
|
commit | commitdiff | tree |
2012-09-28 |
Bdale Garbee | DK has the MAX1555 in stock, load the other LDO bypass...
|
commit | commitdiff | tree |
2012-09-28 |
Bdale Garbee | see if we can quiet the AC DRC engine about the guide...
|
commit | commitdiff | tree |
2012-09-28 |
Bdale Garbee | clean up various details in the planes and silk, add...
|
commit | commitdiff | tree |
2012-09-27 |
Bdale Garbee | move to fresher SMA footprint with broader applicability...
|
commit | commitdiff | tree |
2011-12-27 |
Bdale Garbee | make note of the new balun
|
commit | commitdiff | tree |
2011-11-20 |
Bdale Garbee | freshen attribute value
|
commit | commitdiff | tree |
2011-11-14 |
Bdale Garbee | clean up silk around U1 and U3
|
commit | commitdiff | tree |
2011-11-14 |
Bdale Garbee | add Altus Metrum logo in silk
|
commit | commitdiff | tree |
next |