| 2019-03-10 |
Bdale Garbee | add footprint for Abracom crystals in ABM3C package
|
commit | commitdiff | tree |
| 2019-02-16 |
Bdale Garbee | turn on the fifth and sixth mounting holes in mechanical...
|
commit | commitdiff | tree |
| 2018-12-14 |
Bdale Garbee | improve 11071 footprint with full copper ovals for...
|
commit | commitdiff | tree |
| 2018-12-12 |
Bdale Garbee | update bomAM to reflect change in lepton-eda 1.9.7 api
|
commit | commitdiff | tree |
| 2018-12-09 |
Bdale Garbee | update bomAM to reflect more scheme function renaming...
|
commit | commitdiff | tree |
| 2018-12-06 |
Bdale Garbee | note that the 8743 FETs come on a 16mm reel
|
commit | commitdiff | tree |
| 2018-12-06 |
Bdale Garbee | note that CC1200 comes on 12mm reel
|
commit | commitdiff | tree |
| 2018-12-04 |
Bdale Garbee | add footprints from pcb used in test stand board that...
|
commit | commitdiff | tree |
| 2018-12-01 |
Bdale Garbee | logo in top silk 0.670 inches tall
|
commit | commitdiff | tree |
| 2018-11-26 |
Bdale Garbee | pull in standard footprints for 0603, 0805, and 1206...
|
commit | commitdiff | tree |
| 2018-11-26 |
Bdale Garbee | add footprint for Panasonic M1040M shielded inductors
|
commit | commitdiff | tree |
| 2018-11-25 |
Bdale Garbee | data sheet for car stereo amp chip
|
commit | commitdiff | tree |
| 2018-11-25 |
Bdale Garbee | adding parts for car stereo project
|
commit | commitdiff | tree |
| 2018-11-23 |
Bdale Garbee | add group[57] support to all zip creation targets,...
|
commit | commitdiff | tree |
| 2018-11-16 |
Bdale Garbee | fix XYRS file creation when using pcb-rnd
|
commit | commitdiff | tree |
| 2018-11-10 |
Bdale Garbee | more pref parts updates reflecting availability for...
|
commit | commitdiff | tree |
| 2018-11-10 |
Bdale Garbee | add clearance to tangs on 11071 footprint
|
commit | commitdiff | tree |
| 2018-11-10 |
Bdale Garbee | update pref parts to reflect availability for easymega...
|
commit | commitdiff | tree |
| 2018-11-05 |
Bdale Garbee | add footprint generator for 4ucon 11071 micro USB connector...
|
commit | commitdiff | tree |
| 2018-11-05 |
Bdale Garbee | handle pcb-rnd case where inner layers are differently...
|
commit | commitdiff | tree |
| 2018-10-06 |
Bdale Garbee | add new 4ucon micro USB connector
|
commit | commitdiff | tree |
| 2018-10-06 |
Bdale Garbee | update pref parts to use newer footprint for 9250
|
commit | commitdiff | tree |
| 2018-10-06 |
Bdale Garbee | add STM32L151RBT6 for EasyMega use
|
commit | commitdiff | tree |
| 2018-09-14 |
Bdale Garbee | add ufqfpn48 version of STM32F042 for EasyMotor
|
commit | commitdiff | tree |
| 2018-09-14 |
Bdale Garbee | add a Bdale'esque symbol for 32 pin STM32F042
|
commit | commitdiff | tree |
| 2018-09-14 |
Bdale Garbee | rename Keith's version of STM32F042-32 symbol used...
|
commit | commitdiff | tree |
| 2018-09-14 |
Bdale Garbee | clean up new muffins too
|
commit | commitdiff | tree |
| 2018-09-13 |
Bdale Garbee | updated u-blox data sheets for ZOE-M8Q, now in production
|
commit | commitdiff | tree |
| 2018-09-07 |
Bdale Garbee | create gnet-bomAM.scm for lepton-netlist use in partslists...
|
commit | commitdiff | tree |
| 2018-09-07 |
Bdale Garbee | add mfg to attribs so bomAM doesn't need to hard-wire...
|
commit | commitdiff | tree |
| 2018-09-07 |
Bdale Garbee | remove pcb-rnd auto-save files too during a clean
|
commit | commitdiff | tree |
| 2018-09-06 |
Bdale Garbee | grounding an "out" pin causes drc whining
|
commit | commitdiff | tree |
| 2018-09-06 |
Bdale Garbee | add footprint for the DFN12 variant used by OnSemi...
|
commit | commitdiff | tree |
| 2018-09-06 |
Bdale Garbee | let make create all the 50mil pin header variants
|
commit | commitdiff | tree |
| 2018-09-06 |
Bdale Garbee | add symbol and datasheet for high-side switch for TeleSwitch
|
commit | commitdiff | tree |
| 2018-09-05 |
Bdale Garbee | mechanical: updated .gitignore to ignore all products
|
commit | commitdiff | tree |
| 2018-09-05 |
Bdale Garbee | add support for another "muffin" label size
|
commit | commitdiff | tree |
| 2018-09-05 |
Bdale Garbee | we've been using the 0402 footprint from pcb dist,...
|
commit | commitdiff | tree |
| 2018-09-01 |
Bdale Garbee | another cap that's out of stock
|
commit | commitdiff | tree |
| 2018-08-23 |
Bdale Garbee | go ahead and rename the 'other' partslist for consistency
|
commit | commitdiff | tree |
| 2018-08-23 |
Bdale Garbee | DK won't take a parts list without .csv suffix now...
|
commit | commitdiff | tree |
| 2018-08-23 |
Bdale Garbee | pref parts updates in anticipation of TeleDongle build
|
commit | commitdiff | tree |
| 2018-08-17 |
Bdale Garbee | add footprint for 4ucon 11071 micro USB in lihata format
|
commit | commitdiff | tree |
| 2018-08-17 |
Bdale Garbee | pcb-rnd.mk: remove use of project, add instantiation...
|
commit | commitdiff | tree |
| 2018-08-17 |
Bdale Garbee | add a project.lht template to force use of altusmetrum...
|
commit | commitdiff | tree |
| 2018-08-17 |
Bdale Garbee | update pcb-rnd.mk to assume lepton-eda with tEDAx output...
|
commit | commitdiff | tree |
| 2018-08-14 |
Bdale Garbee | rationalize header content
|
commit | commitdiff | tree |
| 2018-08-14 |
Bdale Garbee | upate gnet-tEDAx.scm to work with lepton-eda, preserve...
|
commit | commitdiff | tree |
| 2018-08-14 |
Bdale Garbee | giving up on trying to get project name into the tEDAx...
|
commit | commitdiff | tree |
| 2018-08-13 |
Bdale Garbee | a tEDAx output module for gnetlist / lepton-netlist...
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | add 220uF through hole cap used on TeleFireEight to...
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | add 140 and 260 ohm 0402 resistors to preferred parts
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | add a current sense resistor for telefireeight to preferred...
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | add datasheet metadata to INA180 current sense amp...
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | data sheet and schematic symbol for TI INA180 current...
|
commit | commitdiff | tree |
| 2018-06-29 |
Bdale Garbee | data sheet for female blade terminals useful for ATC...
|
commit | commitdiff | tree |
| 2018-06-21 |
Bdale Garbee | stop pretending we're using FreeCAD to generate g-code
|
commit | commitdiff | tree |
| 2018-06-15 |
Bdale Garbee | telelco panel cover g-code generated and successfully...
|
commit | commitdiff | tree |
| 2018-06-15 |
Bdale Garbee | footprint for suppression diode used in AMSAT LTI design
|
commit | commitdiff | tree |
| 2018-06-11 |
Bdale Garbee | Omnetics connector for Fox LTI
|
commit | commitdiff | tree |
| 2018-05-30 |
Bdale Garbee | thin panel around encoder and power switch, fix pcb...
|
commit | commitdiff | tree |
| 2018-05-30 |
Bdale Garbee | make note of changes needed in future prints of LCO...
|
commit | commitdiff | tree |
| 2018-05-30 |
Bdale Garbee | ignore pdf output from lowriter for TeleLCO panel
|
commit | commitdiff | tree |
| 2018-05-30 |
Bdale Garbee | label for TeleLCO panel
|
commit | commitdiff | tree |
| 2018-05-29 |
Bdale Garbee | document what the ledtower base file is for
|
commit | commitdiff | tree |
| 2018-05-29 |
Bdale Garbee | new 4ucon micro USB part with posts
|
commit | commitdiff | tree |
| 2018-05-29 |
Bdale Garbee | cut cavity from back side to get LCDs closer to surface
|
commit | commitdiff | tree |
| 2018-05-29 |
Bdale Garbee | update panel to resolve SMA vs drag mode switch conflict
|
commit | commitdiff | tree |
| 2018-05-27 |
Bdale Garbee | data sheets for new parts needed on Fox LTI FM
|
commit | commitdiff | tree |
| 2018-05-27 |
Bdale Garbee | more mechanical output files to ignore
|
commit | commitdiff | tree |
| 2018-05-27 |
Bdale Garbee | photo showing correct orientation of Power Pole connectors...
|
commit | commitdiff | tree |
| 2018-05-26 |
Bdale Garbee | add led tower holes and position rocker switches on...
|
commit | commitdiff | tree |
| 2018-05-25 |
Bdale Garbee | move LED tower wire hole to correct side, notch for...
|
commit | commitdiff | tree |
| 2018-05-25 |
Bdale Garbee | add drawing for plexiglass panel cover, adjust toggle...
|
commit | commitdiff | tree |
| 2018-05-25 |
Bdale Garbee | optimize length of toggle switch anti-rotation ribs...
|
commit | commitdiff | tree |
| 2018-05-25 |
Bdale Garbee | correct position of rib next to power switch on telelco...
|
commit | commitdiff | tree |
| 2018-05-24 |
Bdale Garbee | base for LED tower warning light on TeleFire boxes...
|
commit | commitdiff | tree |
| 2018-05-23 |
Bdale Garbee | added toggle switch lands and ribs, third print
|
commit | commitdiff | tree |
| 2018-05-23 |
Bdale Garbee | snapshot
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | add datasheets for STM32F413, proposed for use in TeleActive
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | add more things to ignore in mechancial subtree
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | various design files from Pelican for the 1170 case...
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | datasheet for high-rel 1802
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | design data for cutting TeleFireEight ammo boxes
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | connecter used on some of Bdale's personal projects
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | add script used to generate g-code for cutting TeleBT...
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | add script for generating g-code to cut TeleDongle...
|
commit | commitdiff | tree |
| 2018-05-20 |
Bdale Garbee | 1170 panel as per second full print
|
commit | commitdiff | tree |
| 2018-05-16 |
Bdale Garbee | add Thingiverse links to mechanical Notebook file
|
commit | commitdiff | tree |
| 2018-05-16 |
Bdale Garbee | set bracket hole diameter for M3 brass insert
|
commit | commitdiff | tree |
| 2018-05-16 |
Bdale Garbee | angle brackets for mounting panel in TeleLCO
|
commit | commitdiff | tree |
| 2018-05-15 |
Bdale Garbee | correct STM32L152 part number, add Cree blue LED
|
commit | commitdiff | tree |
| 2018-05-15 |
Bdale Garbee | added nibs for LED bodies
|
commit | commitdiff | tree |
| 2018-05-14 |
Bdale Garbee | first cut at panel surface completed
|
commit | commitdiff | tree |
| 2018-05-14 |
Bdale Garbee | LCD openings and encoder shaft positioned, overall...
|
commit | commitdiff | tree |
| 2018-05-13 |
Bdale Garbee | start a mechanical parts tree with the powerpole mount...
|
commit | commitdiff | tree |
| 2018-05-10 |
Bdale Garbee | add an 8-position standard, high reliability DIP switch...
|
commit | commitdiff | tree |
| 2018-05-10 |
Bdale Garbee | add symbol for an 8-way standard dip switch for use...
|
commit | commitdiff | tree |
| 2018-05-10 |
Bdale Garbee | data sheet for dip switch used on TeleFire boards
|
commit | commitdiff | tree |
| 2018-05-08 |
Bdale Garbee | add 3mm through-hole LEDs to pref parts list for TeleLCO
|
commit | commitdiff | tree |
| next |
projects / hw / altusmetrum / search