git.gag.com Git - hw/telefireeight/search

]> git.gag.com Git - hw/telefireeight/search

2018-08-03	Bdale Garbee	add pyro current sensor, fatten FET traces	commit \| commitdiff \| tree
2018-07-01	Bdale Garbee	add a serial number block, shuffle silk slightly to...	commit \| commitdiff \| tree
2018-06-26	Bdale Garbee	update silk to show 30A for on-board fuse	commit \| commitdiff \| tree
2018-05-31	Bdale Garbee	forward annotate resistor value changes to pcb file	commit \| commitdiff \| tree
2018-05-30	Bdale Garbee	update LED resistors to values used in TeleLCO, which...	commit \| commitdiff \| tree
2018-05-28	Bdale Garbee	add another schematic sheet with off-board parts	commit \| commitdiff \| tree
2018-05-22	Bdale Garbee	add sense_pyro resistor stack to layout	commit \| commitdiff \| tree
2018-05-22	Bdale Garbee	add sense_pyro resistor stack that accidentally got...	commit \| commitdiff \| tree
2018-05-21	Bdale Garbee	spreadsheet with calculations for hole positions relative to	commit \| commitdiff \| tree
2018-05-16	Bdale Garbee	remove paste from spade lug pads	commit \| commitdiff \| tree
2018-05-10	Bdale Garbee	add 8-position dip switch for easy bank selection	commit \| commitdiff \| tree
2018-05-10	Bdale Garbee	add two more mounting holes to increase stiffness for...	commit \| commitdiff \| tree
2018-03-29	Bdale Garbee	add a 0.1uF bypass cap on LDO input to make really...	commit \| commitdiff \| tree
2018-03-29	Bdale Garbee	shrink pcb work area to board geometry	commit \| commitdiff \| tree
2018-03-29	Bdale Garbee	route complete, DRC clean	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	route RF signal strength LEDs	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	most "hard" routing work done, fire/sense/LED lines...	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	lose the external reset controller, rely on the SOC...	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	chunky copper bits added for high-current paths	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	use schematic import hack from DJ to update old spade...	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	more work on placement	commit \| commitdiff \| tree
2018-03-28	Bdale Garbee	spades and LEDs all placed	commit \| commitdiff \| tree
2018-03-27	Bdale Garbee	simplify board outline in light of BNC connector switch	commit \| commitdiff \| tree
2018-03-27	Bdale Garbee	switch BNC connector, clean up attributes	commit \| commitdiff \| tree
2018-03-27	Bdale Garbee	all components pulled in from schematic	commit \| commitdiff \| tree
2018-03-27	Bdale Garbee	significant cleanup of schematic	commit \| commitdiff \| tree
2018-03-27	Bdale Garbee	clean up	commit \| commitdiff \| tree
2018-03-27	Bdale Garbee	update symbols to clear version mismatches	commit \| commitdiff \| tree
2018-03-20	Bdale Garbee	first cut at schematic for TeleFireEight	commit \| commitdiff \| tree
2018-03-14	Bdale Garbee	add continuity LEDs for additional channels	commit \| commitdiff \| tree
2018-03-13	Bdale Garbee	add gitignore	commit \| commitdiff \| tree
2018-03-13	Bdale Garbee	update silk and pull in unplaced parts to pcb design	commit \| commitdiff \| tree
2018-03-13	Bdale Garbee	fuse footprint changed names	commit \| commitdiff \| tree
2018-03-13	Bdale Garbee	re-base telefireeight schematic on Keith's latest telefirefour	commit \| commitdiff \| tree
2018-03-11	Bdale Garbee	initial capture, clone of telefirefour	commit \| commitdiff \| tree

8-channel launch pad end of wireless launch system

RSS Atom