git.gag.com Git - hw/micropeak/search

2012-10-02	Keith Packard	More copper shuffling Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-10-02	Keith Packard	Clean up PCB a bit Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-10-02	Keith Packard	Add datasheet for the power switch Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-10-01	Keith Packard	Label the power switch positions 0 and 1 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-10-01	Keith Packard	Add a power switch. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-10-01	Keith Packard	Move R1 S to keep it away from D1's other pad Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-30	Keith Packard	Move R1 back in place Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-30	Keith Packard	Remove EEPROM. Switch LEDs. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-30	Keith Packard	Flip MISO/MOSI around. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-30	Keith Packard	Add datasheets	commit \| commitdiff \| tree
2012-09-30	Keith Packard	Add LED datasheet	commit \| commitdiff \| tree
2012-09-28	Keith Packard	Correct at24c512 I2C pins Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-28	Keith Packard	Add resistor from MS5611 MISO pin Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-21	Keith Packard	Add I2C pull-ups Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-20	Keith Packard	Push ms5611 bypass cap out of the way. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-20	Keith Packard	Clean up the CPU bypass cap connections Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-19	Keith Packard	Add 64kB flash for data logging Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-19	Keith Packard	Clean up ground plane on the back side of the board Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-17	Keith Packard	Tie mounting holes to VCC	commit \| commitdiff \| tree
2012-09-14	Keith Packard	Battery holder has + on the metal part and - on the... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-11	Keith Packard	Switch to new PCB version. Fix DRC issue. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-11	Keith Packard	Generate .zip file more cleanly Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-11	Keith Packard	Move component labels well off board. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-04	Keith Packard	Move programming connector nearly off board. Add logo Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-09-04	Keith Packard	Ignore built files Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-23	Keith Packard	Use 6-pin header for AVR programming Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-21	Keith Packard	Rename nRESET net as \_reset\_ so it looks nicer in... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-21	Keith Packard	Clean up a few traces, nothing huge. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-17	Keith Packard	Bump revision number to 0.2 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-17	Keith Packard	Switch to 5-pin debug connector Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-16	Keith Packard	Shuffle U1 bypass cap over Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-16	Keith Packard	Increase clearance around MO-220 pads Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-15	Keith Packard	Flood top with ground. Fix clearance around pico-ezmate. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-15	Keith Packard	Shuffle things around to make room for a fourth hole Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Switch to blue LED. Use available TDK 4.7uF capacitor Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Fix H1 and H2 to match H3 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Add some text to the silk Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Add another hole Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Move H2 text to center of H2 Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Increase solder mask clearance around pico-ezmate pads Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Use the ATMEL QFN appnote AT88RF1354 to build a more... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Add baro datasheet	commit \| commitdiff \| tree
2012-08-13	Keith Packard	Switch from picoblade to pico ezmate	commit \| commitdiff \| tree
2012-08-12	Keith Packard	Add holes. Eliminate vias under baro sensor. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2012-08-12	Keith Packard	Add retab to format partslist	commit \| commitdiff \| tree
2012-08-12	Keith Packard	Import new MicroPeak project Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree

rocketry peak recording altimeter

RSS Atom