| 2024-02-16 |
Bdale Garbee | fix metadata for FETs
|
commit | commitdiff | tree |
| 2023-07-03 |
Bdale Garbee | change LDO input cap from 0.1 to 1.0uF, maybe help...
|
commit | commitdiff | tree |
| 2023-06-25 |
Bdale Garbee | fix erroneous solder paste for quick disconnect tabs
|
commit | commitdiff | tree |
| 2023-06-23 |
Bdale Garbee | fix usb copper remnants on power plane
|
commit | commitdiff | tree |
| 2023-05-19 |
Bdale Garbee | LED resistors moved inboard, all signals on outer layers
|
commit | commitdiff | tree |
| 2023-05-19 |
Bdale Garbee | switch SOC back to 8 MHz rock to avoid firmware change
|
commit | commitdiff | tree |
| 2023-05-17 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
| 2023-05-17 |
Bdale Garbee | move to TSM200 dual FET, 16 MHz SOC crystal
|
commit | commitdiff | tree |
| 2023-05-17 |
Bdale Garbee | route complete again
|
commit | commitdiff | tree |
| 2023-05-17 |
Bdale Garbee | switch to slotted footprint for USBmicroV, and associated...
|
commit | commitdiff | tree |
| 2023-05-12 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
| 2023-05-10 |
Bdale Garbee | re-construct "islands" to go to 25 mil clearance
|
commit | commitdiff | tree |
| 2023-05-10 |
Bdale Garbee | move to current pcb-rnd template to get mechanical...
|
commit | commitdiff | tree |
| 2023-04-28 |
Bdale Garbee | more to-do items
|
commit | commitdiff | tree |
| 2023-04-28 |
Bdale Garbee | increase size of LED color indicating silk for easier...
|
commit | commitdiff | tree |
| 2023-04-28 |
Bdale Garbee | lose the spreadsheet I once used to calculate drill...
|
commit | commitdiff | tree |
| 2022-02-11 |
Bdale Garbee | move dip switch and force boot jumper away from mounting...
|
commit | commitdiff | tree |
| 2022-02-11 |
Bdale Garbee | move LED related silk to the board side the LED's mount on
|
commit | commitdiff | tree |
| 2022-01-31 |
Bdale Garbee | add polarity protection FET, update to version 2.1...
|
commit | commitdiff | tree |
| 2020-07-06 |
Bdale Garbee | saved with pcb-rnd 2.2.1
|
commit | commitdiff | tree |
| 2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
| 2020-05-12 |
Bdale Garbee | more to-do list items for next board turn
|
commit | commitdiff | tree |
| 2020-05-12 |
Bdale Garbee | don't forget to add FET to board for next rev...
|
commit | commitdiff | tree |
| 2020-05-12 |
Bdale Garbee | update to-do list
|
commit | commitdiff | tree |
| 2020-05-12 |
Bdale Garbee | forward annotate, add thermal relief to electrolytic...
|
commit | commitdiff | tree |
| 2019-03-18 |
Bdale Garbee | add more text to capture parts used in packaging, far...
|
commit | commitdiff | tree |
| 2018-11-28 |
Bdale Garbee | eliminate spurious off-board via found by AC CAM department
|
commit | commitdiff | tree |
| 2018-11-24 |
Bdale Garbee | updated metadata for AC quote process
|
commit | commitdiff | tree |
| 2018-11-24 |
Bdale Garbee | mark debug connector as noload
|
commit | commitdiff | tree |
| 2018-10-18 |
Bdale Garbee | clean up schematics a bit (no intentional circuit changes)
|
commit | commitdiff | tree |
| 2018-09-09 |
Bdale Garbee | move to lepton-eda and pcb-rnd
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | annotate schematic with current sensor full scale range
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | 220uF cap metadata now in preferred parts database
|
commit | commitdiff | tree |
| 2018-08-03 |
Bdale Garbee | add pyro current sensor, fatten FET traces
|
commit | commitdiff | tree |
| 2018-07-01 |
Bdale Garbee | add a serial number block, shuffle silk slightly to...
|
commit | commitdiff | tree |
| 2018-06-26 |
Bdale Garbee | update silk to show 30A for on-board fuse
|
commit | commitdiff | tree |
| 2018-05-31 |
Bdale Garbee | forward annotate resistor value changes to pcb file
|
commit | commitdiff | tree |
| 2018-05-30 |
Bdale Garbee | update LED resistors to values used in TeleLCO, which...
|
commit | commitdiff | tree |
| 2018-05-28 |
Bdale Garbee | add another schematic sheet with off-board parts
|
commit | commitdiff | tree |
| 2018-05-22 |
Bdale Garbee | add sense_pyro resistor stack to layout
|
commit | commitdiff | tree |
| 2018-05-22 |
Bdale Garbee | add sense_pyro resistor stack that accidentally got...
|
commit | commitdiff | tree |
| 2018-05-21 |
Bdale Garbee | spreadsheet with calculations for hole positions relative to
|
commit | commitdiff | tree |
| 2018-05-16 |
Bdale Garbee | remove paste from spade lug pads
|
commit | commitdiff | tree |
| 2018-05-10 |
Bdale Garbee | add 8-position dip switch for easy bank selection
|
commit | commitdiff | tree |
| 2018-05-10 |
Bdale Garbee | add two more mounting holes to increase stiffness for...
|
commit | commitdiff | tree |
| 2018-03-29 |
Bdale Garbee | add a 0.1uF bypass cap on LDO input to make really...
|
commit | commitdiff | tree |
| 2018-03-29 |
Bdale Garbee | shrink pcb work area to board geometry
|
commit | commitdiff | tree |
| 2018-03-29 |
Bdale Garbee | route complete, DRC clean
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | route RF signal strength LEDs
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | most "hard" routing work done, fire/sense/LED lines...
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | lose the external reset controller, rely on the SOC...
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | chunky copper bits added for high-current paths
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | use schematic import hack from DJ to update old spade...
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | more work on placement
|
commit | commitdiff | tree |
| 2018-03-28 |
Bdale Garbee | spades and LEDs all placed
|
commit | commitdiff | tree |
| 2018-03-27 |
Bdale Garbee | simplify board outline in light of BNC connector switch
|
commit | commitdiff | tree |
| 2018-03-27 |
Bdale Garbee | switch BNC connector, clean up attributes
|
commit | commitdiff | tree |
| 2018-03-27 |
Bdale Garbee | all components pulled in from schematic
|
commit | commitdiff | tree |
| 2018-03-27 |
Bdale Garbee | significant cleanup of schematic
|
commit | commitdiff | tree |
| 2018-03-27 |
Bdale Garbee | clean up
|
commit | commitdiff | tree |
| 2018-03-27 |
Bdale Garbee | update symbols to clear version mismatches
|
commit | commitdiff | tree |
| 2018-03-20 |
Bdale Garbee | first cut at schematic for TeleFireEight
|
commit | commitdiff | tree |
| 2018-03-14 |
Bdale Garbee | add continuity LEDs for additional channels
|
commit | commitdiff | tree |
| 2018-03-13 |
Bdale Garbee | add gitignore
|
commit | commitdiff | tree |
| 2018-03-13 |
Bdale Garbee | update silk and pull in unplaced parts to pcb design
|
commit | commitdiff | tree |
| 2018-03-13 |
Bdale Garbee | fuse footprint changed names
|
commit | commitdiff | tree |
| 2018-03-13 |
Bdale Garbee | re-base telefireeight schematic on Keith's latest telefirefour
|
commit | commitdiff | tree |
| 2018-03-11 |
Bdale Garbee | initial capture, clone of telefirefour
|
commit | commitdiff | tree |
|
projects / hw / telefireeight / search