From f054fabaefdbe21accdd658cc7e00193430a8722 Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Tue, 17 Nov 2020 11:08:23 -0700 Subject: [PATCH] break large paragraph in two --- EasyMotor/index.mdwn | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/EasyMotor/index.mdwn b/EasyMotor/index.mdwn index 87c8f62..281de31 100644 --- a/EasyMotor/index.mdwn +++ b/EasyMotor/index.mdwn @@ -26,7 +26,9 @@ test flights of EasyMotor. The sensor bodies are 316 stainless with a 1/8 NPT male boss, so the approach chosen is to drill a 1/8 inch touch hole all the way through the closure, then drill and tap 1/8 NPT female threads part way through the closure thickness. The hole gets filled with grease and the -sensor screwed in. The first example is a 98mm snap-ring clossure, with the +sensor screwed in. + +The first example is a 98mm snap-ring clossure, with the sensor and electronics mounted off-center so a 3/8" all-thread could be used in the center for motor retention in a minimum-diameter-ish airframe. The mounting bracket for the electronics was bent from a bit of 1/16" aluminum -- 2.47.2