From 8105aaede06931fa476251adef883623b3e76c4b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 18 Mar 2013 13:38:07 -0700 Subject: [PATCH] Update to use shared altusmetrum symbols and build instructions Signed-off-by: Keith Packard --- Build | 16 +++++++++------- gafrc | 3 +-- micropeak.sch | 44 ++++++++++++++++++++++---------------------- 3 files changed, 32 insertions(+), 31 deletions(-) diff --git a/Build b/Build index 0735b3f..5d71f74 100644 --- a/Build +++ b/Build @@ -30,7 +30,7 @@ boards at a time. 2.2 Load parts on each board. I do them in this order: 1. 100k reset capacitor - 2. 470 LED current limiting capacitor + 2. 470 LED current limiting resistor 3. Power switch 4. CPU 5. CPU bypass cap @@ -75,23 +75,25 @@ boards at a time. 5.1 Flow a small amount of solder onto the center conductor pad so that it is raised high enough to hit the battery terminal. - 5.2 Take the metal battery holder cage, align to the circuit board and + 5.2 Clean the resulting pad with isopropyl alcohol + + 5.3 Take the metal battery holder cage, align to the circuit board and clamp the ATtiny85 end in a vise whose jaws are horizontal. This end has enough board surface on the parts side to allow clamping, especially if you align the bypass cap inside a gap in the vise jaws. - 5.3 Press down on the battery holder so that the exposed terminal + 5.4 Press down on the battery holder so that the exposed terminal makes firm contact with the PCB pad. Solder in place. - 5.4 Remove from vise. + 5.5 Remove from vise. - 5.5 With the vise jaws vertical again, place the board in the end of + 5.6 With the vise jaws vertical again, place the board in the end of the vise with the remaining battery holder terminal exposed. - 5.6 Solder in place. + 5.7 Solder in place. - 5.7 Load battery into plastic tray, install in battery holder + 5.8 Load battery into plastic tray, install in battery holder 6. System test diff --git a/gafrc b/gafrc index 934f6c6..1c85206 100644 --- a/gafrc +++ b/gafrc @@ -1,2 +1 @@ -; empty the library path and populate it with only our own symbols -(component-library "./symbols") +(load "../altusmetrum/gafrc") diff --git a/micropeak.sch b/micropeak.sch index 10a9d18..03a46d3 100644 --- a/micropeak.sch +++ b/micropeak.sch @@ -1,5 +1,5 @@ -v 20110115 2 -C 40000 40000 0 0 0 title-B.sym +v 20121123 2 +C 40000 40000 0 0 0 title-B-keithp.sym C 42000 44500 1 0 0 attiny85.sym { T 41995 44475 5 10 0 1 0 0 1 @@ -17,7 +17,7 @@ vendor_part_number=ATTINY85-20MU-ND T 41995 44475 5 10 0 1 0 0 1 loadstatus=smt } -C 52300 45500 1 0 1 MS5611.sym +C 52300 45500 1 0 1 MS5607.sym { T 50905 47695 5 10 1 1 0 6 1 value=MS5611 @@ -30,11 +30,11 @@ footprint=MS5611 T 52305 42295 5 10 0 1 0 6 1 vendor=measspec T 52305 42295 5 10 0 1 0 6 1 -vendor_part_number=MS5611 +vendor_part_number=MS5607 T 52305 42295 5 10 0 1 0 6 1 loadstatus=smt } -C 42300 43300 1 270 0 battery-1.sym +C 42300 43300 1 270 0 battery.sym { T 43200 43000 5 10 0 0 270 0 1 device=BATTERY @@ -51,13 +51,13 @@ vendor_part_number=BHX1-1025-SM-ND T 42300 43300 5 10 0 0 270 0 1 loadstatus=smt } -C 42300 43500 1 0 0 3.3V-plus-1.sym -C 52600 47300 1 0 0 3.3V-plus-1.sym -C 41300 47000 1 0 0 3.3V-plus-1.sym -C 41400 44700 1 0 0 gnd-1.sym -C 52700 45400 1 0 0 gnd-1.sym +C 42300 43500 1 0 0 3.3V-plus.sym +C 52600 47300 1 0 0 3.3V-plus.sym +C 41300 47000 1 0 0 3.3V-plus.sym +C 41400 44700 1 0 0 gnd.sym +C 52700 45400 1 0 0 gnd.sym N 41500 45000 41500 46100 4 -C 41700 46100 1 90 0 capacitor-1.sym +C 41700 46100 1 90 0 capacitor.sym { T 41000 46300 5 10 0 0 90 0 1 device=CAPACITOR @@ -102,7 +102,7 @@ N 48900 46900 50000 46900 4 N 50000 46900 50000 47300 4 N 52800 45700 52300 45700 4 N 52800 47300 52300 47300 4 -C 52600 47300 1 270 0 capacitor-1.sym +C 52600 47300 1 270 0 capacitor.sym { T 53300 47100 5 10 0 0 270 0 1 device=CAPACITOR @@ -134,7 +134,7 @@ N 47500 45000 47800 45000 4 T 47500 45100 5 10 1 1 0 0 1 netname=\_reset\_ } -C 48400 45000 1 0 0 led-2.sym +C 48400 45000 1 0 0 led.sym { T 48700 45300 5 10 1 1 180 0 1 refdes=D1 @@ -151,7 +151,7 @@ vendor_part_number=475-1178-1-ND T 48400 45000 5 10 0 1 90 0 1 loadstatus=smt } -C 47500 45400 1 0 0 resistor-1.sym +C 47500 45400 1 0 0 resistor.sym { T 47800 45800 5 10 0 0 0 0 1 device=RESISTOR @@ -246,10 +246,10 @@ T 46100 41800 5 10 1 1 0 0 1 netname=\_reset\_ } N 46100 41400 46700 41400 4 -C 46000 41100 1 0 0 gnd-1.sym +C 46000 41100 1 0 0 gnd.sym N 46700 43000 46100 43000 4 -C 45900 43000 1 0 0 3.3V-plus-1.sym -C 46700 41300 1 0 0 pico-ezmate-6.sym +C 45900 43000 1 0 0 3.3V-plus.sym +C 46700 41300 1 0 0 conn-6.sym { T 47055 43595 5 10 1 1 0 0 1 refdes=J1 @@ -260,10 +260,10 @@ device=CONNECTOR T 46695 41275 5 10 0 1 0 0 1 value=6-pin } -C 51300 44400 1 0 0 3.3V-plus-1.sym +C 51300 44400 1 0 0 3.3V-plus.sym N 48400 45500 48400 45100 4 -C 49200 44800 1 0 0 gnd-1.sym -C 49100 45600 1 0 0 resistor-1.sym +C 48700 44800 1 0 0 gnd.sym +C 49100 45600 1 0 0 resistor.sym { T 49400 46000 5 10 0 0 0 0 1 device=RESISTOR @@ -300,9 +300,9 @@ device=SWITCH T 43400 41000 5 10 0 0 180 6 1 value=SPDT } -C 42700 41100 1 0 0 gnd-1.sym +C 42700 41100 1 0 0 gnd.sym N 42800 41400 42800 41500 4 -C 43200 42500 1 90 0 resistor-1.sym +C 43200 42500 1 90 0 resistor.sym { T 42800 42800 5 10 0 0 90 0 1 device=RESISTOR -- 2.47.2